http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fu‑an Hua,Hong‑wu Song,Tao Sun,Jian‑ping Li 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.3
A model based on inter-diffusion theory was established to predict growth kinetics of the intermetallic compounds (IMCs)formed in roll bonded Al/Cu sheets during annealing process. The model can give good prediction of both IMC layers growthkinetics and element concentration distribution at the interface of roll bonded Cu/Al sheets with different thickness underdifferent annealing conditions with certain roll reduction range. It is revealed that the calculated results of the proposedmodel are depended on the inter-diffusion coefficient of each components, which could be related to the interface bondingstate, i.e., bonding methods or rolling reductions for roll bonding. And there was big difference in inter-diffusion coefficientof Al and Cu matrix under different bonding state, while the inter-diffusion coefficient of IMCs changed slightly.
Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon
An, Fu-Qiang,Wu, Rui-Yan,Li, Min,Yuan, Zhi-Guo,Hu, Tuo-Ping,Gao, Jian-Feng Korean Chemical Society 2017 대한화학회지 Vol.61 No.5
Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was $1277.1m^2{\cdot}g^{-1}$, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to $0.53mmol{\cdot}g^{-1}$, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, AC-P700 possesses better regeneration ability and reusability.
An, Fu-Fei,Liu, Yuan-Chong,Zhang, Wei-Wei,Liang, Lei Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.10
Dictamnine (Dic) has the ability to exert cytotoxicity in human cervix, colon, and oral carcinoma cells and dihydroartemisinin (DHA) also has potent anticancer activity on various tumour cell lines. This report explores the molecular mechanisms by which Dic treatment and combination treatment with DHA and Dic cause apoptosis in human lung adenocarcinoma A549 cells. Dic treatment induced concentration- and time-dependent cell death. FCM analysis showed that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which loss of mitochondrial membrane potential (${\Delta}{\Psi}m$) was not involved. In addition, inhibition of caspase-3 using the specific inhibitor, z-DQMD-fmk, did not attenuate Dic-induced apoptosis, implying that Dic-induced caspase-3-independent apoptosis. Combination treatment with DHA and Dic dramatically increased the apoptotic cell death compared to Dic alone. Interestingly, pretreatment with z-DQMD-fmk significantly attenuated DHA and Dic co-induced apoptosis, implying that caspase-3 plays an important role in Dic and DHA co-induced cell apoptosis. Collectively, we found that Dic induced S phase cell cycle arrest at low concentration and cell apoptosis at high concentration in which mitochondria and caspase were not involved and DHA enhanced Dic induced A549 cell apoptosis via a caspase-dependent pathway.
Very Thin Poly-SiC Films for Micro/Nano Devices
Fu, Xiao-An,Noh, Sangsoo,Chen, Li,Mehregany, Mehran American Scientific Publishers 2008 Journal of Nanoscience and Nanotechnology Vol.8 No.6
<P>We report characterization of nitrogen-doped, very thin, low-stress polycrystalline silicon carbide (poly-SiC) films suitable for fabricating micro/nano devices. The poly-SiC films are deposited on 100 mm-diameter (100) silicon wafers in a large-scale, hot-wall, horizontal LPCVD furnace using SiH2Cl2 and C2H2 as precursors and NH3 as doping gas. The deposition temperature and pressure are fixed at 900 °C and 4 Torr, respectively. The deposition rate increases substantially in the first 50 minutes, transitioning to a limiting value thereafter. The deposited films exhibit (111)-orientated polycrystalline 3C-SiC texture. HR-TEM indicates a 1 nm to 4 nm amorphous SiC layer at the SiC/silicon interface. The residual stress and the resistivity of the films are found to be thickness dependent in the range of 100 nm to 1 <I>μ</I>m. Films with thickness less than 100 nm suffer from voids or pinholes. Films thicker than 100 nm are shown to be suitable for fabricating micro/nano devices.</P>
Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon
Fu-Qiang An,Rui-Yan Wu,Zhi-Guo Yuan,Tuo-Ping Hu,Jian-Feng Gao 대한화학회 2017 대한화학회지 Vol.61 No.5
Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was 1277.1 m2·g−1, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to 0.53 mmol·g−1, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, ACP700 possesses better regeneration ability and reusability.
Effective removal of anilines using porous activated carbon based on ureaformaldehyde resin
Fu-Qiang An,Dong Zhang,Xiao-Xia Yue,Guo-Li Ou,Jian-Feng Gao,Tuo-Ping Hu 한국화학공학회 2016 Korean Journal of Chemical Engineering Vol.33 No.2
The effective removal of aniline and its derivatives from wastewater is very important due to the high toxicity. Adsorption with a high-performance adsorbent is an efficient pathway. A novel activated carbon, ACUF-700, was synthesized using homemade ureaformaldehyde resin as the major carbon source carbonized at 700 oC. ACUF-700 is characterized by surface area analyzer, FTIR, elemental analyzer, and SEM. The adsorption properties of ACUF-700 towards anilines are also investigated by using batch methods. The test results showed that the ACUF-700 possesses higher specific surface area and narrower pore size distribution. In virtue of its developed pore structure and nitrogencontaining chemical groups, the adsorption capacities towards aniline, p-toluidine and p-chloroaniline could reach 95.6, 108.1 and 128.9mg/g, respectively. The adsorption process could be well described by the intra-particle mass transfer diffusion model and Sips model. Besides, ACUF700 was regenerated easily using diluted hydrochloric acid solution as eluent and ACUF700 possesses better reusability.
Phishing Sites and Prevention Measures
Zhou Fu-an 보안공학연구지원센터 2015 International Journal of Security and Its Applicat Vol.9 No.1
With the growing number of Internet users in online transactions, the number of phishing sites is also increasing rapidly, the threat of malicious attack front is extended, the means are ever-changing, which gives great economic losses to China's Internet users and businesses, and caused a serious impediment to online financial services and the healthy development of e-business applications. Facing of the growing phishing epidemic, the initiative alone to enhance awareness of Internet users to avoid "phishing" is not enough. This paper analyzes phishing sites based on deception trick, focusing on the Internet user side, made several recommendations to strengthen their resistance to phishing sites.
Calculation of the Allowable Drainage of Parallel Tunnels Based on Ecological Environment Protection
Helin Fu,Pengtao An,Guowen Cheng,Shujie Wen,Jie Li 대한토목학회 2022 KSCE JOURNAL OF CIVIL ENGINEERING Vol.26 No.5
To determine a reasonable value of parallel tunnel drainage, a steady-flow calculation model is established. The differential equilibrium equation of seepage is established, and the equation of the falling funnel curve in a steady state with drainage parameters is solved by using boundary conditions. The maximum drawdown depth of the control point is used to calculate the allowable discharge of the tunnel. Then, the curve equation of the falling funnel is determined, the volume of the drainage funnel is calculated, and the total discharge in the steady state is calculated according to the water storage coefficient. Finally, the theoretical formula is verified based on an engineering case and numerical simulation. Considering the actual engineering geology and hydrogeological conditions of the tunnel site, the total drainage, allowable drainage, and initial support bearing head height calculated with the proposed method are different from the actual measurements collected on site by 10%, 18.9% and 13.6%, respectively. Therefore, the calculation method can provide a reference for similar engineering.