Reliabilities of distances describing bolt placement for high strength steel connections

Ertekin Öztekin 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.54 No.1

In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability of the distance of bolts to the edges of connection plate and the distance of bolts to each other is investigated for high strength steel connections built up with high strength bolts in this study. For this purpose, simple SL (bearing type shear connection) and SLP (bearing type shear connection for body-fit bolts) type steel connections with St 52 grade steel plates with 8 different thicknesses and with 8.8D grade high strength bolts (HV) were constituted and analyzed under H (Dead Loads+Live Loads+Snow Loads+Roof Loads) and HZ (H Loads+Wind Loads+Earthquake Loads) loadings. Geometric properties, material properties and design actions were taken as random variables. Monte Carlo Simulation method was used to compute failure risk and the first order second moment method was used to determine the reliability indexes of those different distances describing the placement of bolts. Results obtained from computations have been presented in graphics and in a Table. Then, they were compared with some values proposed by some structural codes. Finally, new equations were constituted for minimum and maximum values of distances describing bolt placement by regression analyses performed on those results.

Effects of lactic acid bacteria inoculation in pre-harvesting period on fermentation and feed quality properties of alfalfa silage

Ertekin, Ibrahim,Kizilsimsek, Mustafa Asian Australasian Association of Animal Productio 2020 Animal Bioscience Vol.33 No.2

Objective: To develop the fermentation quality and chemical composition of alfalfa (Medicago sativa Lam.) silage, plants were inoculated with different lactic acid bacteria (LAB) strains at field 24 hours before harvest. Methods: The treatment groups were as follow: silage without additive as a control and inoculated with each strains of Lactobacillus brevis (LS-55-2-2), Leuconostoc citerum (L. citerum; L-70-6-1), Lactobacillus bifermentans (L. bifermentans; LS-65-2-1), Lactobacillus plantarum (L. plantarum; LS-3-3) and L. plantarum (LS-72-2). All the silages were stored at 25℃. Parameters such as pH, microorganism and volatile fatty acid contents, crude protein, neutral detergent fiber, acid detergent fiber, net gas, metabolizable energy, organic matter digestibility, dry matter intake and relative feed value were measured to determine fermentation quality, chemical compositions and relative feed value of alfalfa silages. Results: Significant differences were found among the control and treated groups in terms of pH and microorganism contents at all opening times and crude protein, net gas, metabolizable energy and organic matter digestibility of final silage. The pH values ranged from 4.70 to 5.52 for all treatments and control silage had the highest value of overall treatments at T₇₅d silages. Volatile fatty acid of silages was not influenced significantly by inoculations. However, lactic acid content of L. bifermentans (LS-65-2-1) was higher than the other treatments. The highest metabolizable energy and organic matter digestibility were recorded from L. citerum (L-70-6-1) inoculation. In addition, no significant differences were found among treatments in terms of neutral detergent fiber, acid detergent fiber, dry matter intake and relative feed value. Conclusion: Among the treated LAB isolates, L. bifermentans came into prominence especially in terms of organic acid composition and quality characters of silages.

Effects of different nitrogen doses and cultivars on fermentation quality and nutritive value of Italian ryegrass (Lolium multiflorum Lam.) silages

Ertekin Ibrahim,Atis Ibrahim,Aygun Yusuf Ziya,Yilmaz Saban,Kizilsimsek Mustafa 아세아·태평양축산학회 2022 Animal Bioscience Vol.35 No.1

Objective: The fermentation profile and silage quality of 3 Italian ryegrass (Lolium multiflorum Lam.) cultivars (cvs. Devis, Hellen, and Trinova) treated with 5 nitrogen doses (0, 50, 100, 150, and 200 kg/ha) were evaluated. Methods: The experiment was laid out in split plot in randomized complete block design with three replications. Annual ryegrass cultivars used in this study have been commonly grown in Turkey. Nitrogen doses were set in main plot and cultivars in split plot in the field. Plants were harvested at full-flowering stage with dry matter content about 220 g/kg for first cutting and 260 g/kg for second cutting. Harvested plants were chopped theoretically into 2 to 3 cm lengths for ensiling. Chopped fresh materials were ensilaged by compressing in 2 L plastic jars about 3±0.1 kg. Results: Effects of N doses on dry matter, neutral detergent fiber, acid detergent fiber, dry matter digestibility, relative feed value, crude protein, pH, ammonia nitrogen, lactic acid, acetic acid, and lactic acid/acetic acid were statistically significant while water soluble carbohydrate, ash and organic matter were not statistically different. Ammonia nitrogen, crude protein, ash, organic matter, lactic acid, and lactic acid/acetic acid were affected by cultivars, but the other parameters were not. Increasing nitrogen applications positively affected the chemical composition of annual ryegrass silage. The significant increase in protein content was remarkable, however, silage fermentation properties were adversely affected by the increasing nitrogen dose. Conclusion: It can be recommended 150 kg/ha nitrogen dose for annual ryegrass harvested at full blooming stage. Even though the silage fermentation properties of the used cultivars were similar, cv. Devis gave better results than the others in terms of silage pH and relative feed value. Objective: The fermentation profile and silage quality of 3 Italian ryegrass (Lolium multiflorum Lam.) cultivars (cvs. Devis, Hellen, and Trinova) treated with 5 nitrogen doses (0, 50, 100, 150, and 200 kg/ha) were evaluated.Methods: The experiment was laid out in split plot in randomized complete block design with three replications. Annual ryegrass cultivars used in this study have been commonly grown in Turkey. Nitrogen doses were set in main plot and cultivars in split plot in the field. Plants were harvested at full-flowering stage with dry matter content about 220 g/kg for first cutting and 260 g/kg for second cutting. Harvested plants were chopped theoretically into 2 to 3 cm lengths for ensiling. Chopped fresh materials were ensilaged by compressing in 2 L plastic jars about 3±0.1 kg.Results: Effects of N doses on dry matter, neutral detergent fiber, acid detergent fiber, dry matter digestibility, relative feed value, crude protein, pH, ammonia nitrogen, lactic acid, acetic acid, and lactic acid/acetic acid were statistically significant while water soluble carbohydrate, ash and organic matter were not statistically different. Ammonia nitrogen, crude protein, ash, organic matter, lactic acid, and lactic acid/acetic acid were affected by cultivars, but the other parameters were not. Increasing nitrogen applications positively affected the chemical composition of annual ryegrass silage. The significant increase in protein content was remarkable, however, silage fermentation properties were adversely affected by the increasing nitrogen dose.Conclusion: It can be recommended 150 kg/ha nitrogen dose for annual ryegrass harvested at full blooming stage. Even though the silage fermentation properties of the used cultivars were similar, cv. Devis gave better results than the others in terms of silage pH and relative feed value.

Analysis of a bac operon-silenced strain suggests pleiotropic effects of bacilysin in Bacillus subtilis

Ozan Ertekin,Meltem Kutnu,Aslı Aras Taşkın,Mustafa Demir,Ayten Yazgan Karataş,Gülay Özcengiz 한국미생물학회 2020 The journal of microbiology Vol.58 No.4

Bacilysin, as the simplest peptide antibiotic made up of only L-alanine and L-anticapsin, is produced and excreted by Bacillus subtilis under the control of quorum sensing. We analyzed bacilysin-nonproducing strain OGU1 which was obtained by bacA-targeted pMutin T3 insertion into the parental strain genome resulting in a genomic organization (bacA ::lacZ::erm::bacABCDEF) to form an IPTG-inducible bac operon. Although IPTG induction provided 3- to 5-fold increment in the transcription of bac operon genes, no bacilysin activity was detectable in bioassays and inability of the OGU1 to form bacilysin was confirmed by UPLC-mass spectrometry analysis. Phenotypic analyses revealed the deficiencies in OGU1 with respect to colony pigmentation, spore coat proteins, spore resistance and germination, which could be rescued by external addition of bacilysin concentrate into its cultures. 2DE MALDI-TOF/MS and nanoLC-MS/MS were used as complementary approaches to compare cytosolic proteomes of OGU1. 2-DE identified 159 differentially expressed proteins corresponding to 121 distinct ORFs. In nanoLCMS/ MS, 76 proteins were differentially expressed in OGU1. Quantitative transcript analyses of selected genes validated the proteomic findings. Overall, the results pointed to the impact of bacilysin on expression of certain proteins of sporulation and morphogenesis; the members of mother cell compartment- specific σE and σK regulons in particular, quorum sensing and two component-global regulatory systems, peptide transport, stress response as well as CodY- and ScoCregulated proteins.

Reliabilities of distances describing bolt placement for high strength steel connections

Oztekin, Ertekin Techno-Press 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.54 No.1

In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability of the distance of bolts to the edges of connection plate and the distance of bolts to each other is investigated for high strength steel connections built up with high strength bolts in this study. For this purpose, simple SL (bearing type shear connection) and SLP (bearing type shear connection for body-fit bolts) type steel connections with St 52 grade steel plates with 8 different thicknesses and with 8.8D grade high strength bolts (HV) were constituted and analyzed under H (Dead Loads+Live Loads+Snow Loads+Roof Loads) and HZ (H Loads+Wind Loads+Earthquake Loads) loadings. Geometric properties, material properties and design actions were taken as random variables. Monte Carlo Simulation method was used to compute failure risk and the first order second moment method was used to determine the reliability indexes of those different distances describing the placement of bolts. Results obtained from computations have been presented in graphics and in a Table. Then, they were compared with some values proposed by some structural codes. Finally, new equations were constituted for minimum and maximum values of distances describing bolt placement by regression analyses performed on those results.

Investigating the relation between secondary school students` achievement in forming and solving equations

Erhan Ertekin,Ersen Yazici,Ali Delice 한국수학교육학회 2009 수학교육연구 Vol.13 No.2

Fashion consumption during economic crisis: Emerging practices and feelings of consumers

Zeynep Ozdamar Ertekin,Bengu Sevil Oflac,Cemre Serbetcioglu 한국마케팅과학회 2020 Journal of Global Fashion Marketing Vol.11 No.3

Economic crisis has a significant impact on consumption practices and the way consumers justify their consumption patterns. Particularly in the field of fashion, consumers face a conflict between desire to consume due to rapidly changing fashion trends and coping with the decrease in purchasing power due to the economic crisis. Semi-structured interviews were carried out to gain a deeper understanding of how the economic crisis affects consumers’ fashion consumption behavior and the alternative consumption practices that emerge. The research further sheds light on the underlying feelings involved due to changes in consumption patterns. Some of the themes that emerge—reuse, reduce, and reject—are in line with earlier findings on anti-consumption but this time the motives of the consumers are non-voluntary. The findings also contribute to anti-consumption literature by introducing three new themes: refind alternative channels, reconsider, and rely on discounts. The study further shows that there are both positive and negative feelings associated with changes in consumption behavior due to economic crisis. Along with understanding the adaptations in consumption behavior, anticipating these conflicting emotions resulting from crisis related anti-consumption is important for marketers and retailers who are concerned about developing appropriate responsive strategies.

FASHION CONSUMPTION AT TIME OF ECONOMIC CRISIS

Cemre Serbetcioglu,Zeynep Ozdamar-Ertekin,Bengu Sevil-Oflac 글로벌지식마케팅경영학회 2019 Global Fashion Management Conference Vol.2019 No.07

High Rate of Sexual Dysfunction Following Surgery for Rectal Cancer

Wafi Attaallah,Caglar Ertekin,Ilker Tinay,Cumhur Yegen 대한대장항문학회 2014 Annals of Coloproctolgy Vol.30 No.5

Purpose: Although rectal cancer is a very common malignancy and has an improved cure rate in response to oncological treatment, research on rectal-cancer survivors’ sexual function remains limited. Sexual dysfunction (SD) after rectal cancer treatment was measured, and possible predisposing factors that may have an impact on the development of this disorder were identified. Methods: Patients undergoing curative rectal cancer surgery from January 2012 to September 2013 were surveyed using questionnaires. The female sexual function index or the International Index of Erectile Function was recorded. A multiple logistic regression was used to test associations of clinical factors with outcomes. Results: Fifty-six men (56%) and 28 women (44%) who completed the questionnaire were included in the study. A total of 76 patients of the 86 patients (90.5%) with the diagnosis of rectal cancer who were included in this study reported different levels of SD after radical surgery. A total of 64 patients (76%) from the whole cohort reported moderate to severe SD after treatment of rectal cancer. Gender (P = 0.011) was independently associated with SD. Female patients reported significantly higher rates of moderate to severe SD than male patients. Patients were rarely treated for dysfunction. Conclusion: Sexual problems after surgery for rectal cancer are common, but patients are rarely treated for SD. Female patients reported higher rates of SD than males. These results point out the importance of sexual (dys)function in survivors of rectal cancer. More attention should be drawn to this topic for clinical and research purposes.

Wave Spectrum Based Fatigue Analysis for Mediterranean Sea, Black Sea and Aegean Sea

Kabakcioglu, Fuat,Bayraktarkatal, Ertekin Korean Society of Ocean Engineers 2013 International journal of ocean system engineering Vol.3 No.2

In this study, wave spectrum based fatigue analyses are studied for Turkey's adjacent coastal seas by using Maestro finite element analyzing software. Palmgren-Miner's method is used to obtain the fatigue safe life time. Palmgren-Miner's method was selected for the fatigue analyses because of its good acceptance of data from almost all classification societies such as Germanischer Lloyd, the American Bureau of Shipping, Det Norske Veritas, etc. The maximum stress regions of the structures are obtained by using finite element analyses, and the results are compared with the endurance limit of the W$\ddot{o}$hler diagram of AA5059 H321 aluminum alloy. The wave characteristics table given in this article is used to obtain the number of cycles for each sea condition. By using the wave characteristics table, the wave lengths, wave speeds, and cycles are obtained. This study is performed to estimate the lifetimes of a semi-swath type coast guard boat and/or commercial yacht projects, which are produced by using AA5059 H321 aluminum alloy, under different sea environment conditions. Fatigue examinations are performed for both head seas and oblique seas.