http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김동백,권기준,Kim, Dong-Baek,Kwon, Ki-Jun 한국방재학회 2006 한국방재학회논문집 Vol.6 No.2
현재 터널을 시공할 때 발파기술의 발달로 설계단면보다 크게 단면을 발파하는 경우는 많지 않으나 지질 특성상 커다란 여굴이 발생하는 경우가 종종 있으며, 또한 발파기술이 낙후된 시기에 시공된 터널은 설계단면보다 훨씬 크게 발파단면이 형성되어 라이닝을 설치한 후에도 상당 부분이 여굴로 남는 경우가 있다. 여굴이 크게 발생한 부분은 절리를 따라 지하수가 스며들면서 점토질 성분이 혼입되어 있는 부분이 비스듬한 각을 이루면서 터널 단면을 절단하고 있는 파쇄대를 형성하고 있다. 절리면에서 쐐기를 형성하고 있던 상부는 작은 진동에도 모두 낙석으로 떨어지게 되며 구조적인 안정성 문제를 야기한다. 기존터널의 여굴이 발파단면내에 위치하지 못하여, 기존터널의 발파영향선이 확장터널의 발파영향선을 변화시키고, 아치(arch)작용이 발생하지 않아 터널의 안정성에 심각한 문제가 발생할 가능성이 있다. 또한, 여굴의 규모가 커서 여굴의 뒷채움을 하지 않으면 토압의 측면에서 매우 불리하며, 안정화되지 못한 여굴의 상부에서 낙반이 발생할 위험이 상존한다. 따라서 공사의 원만한 진행을 위해서는 여굴의 안정화를 이루고 난 후 후속공정을 진행하거나, 낙반에 대한 안전조치를 취한 후 공사를 진행해야 한다. 본 연구에서는 이러한 문제를 해결하기 위해서 터널의 구조적 안전성과 시공성을 검토하였다. When we build the tunnel, occasionally, the blasted section exceed the designed section because of geological properties and the lack of blasting technologies, and the exceed section is remained as over break after the construction of tunnel lining. When the underground water leaks with silt and clay through the cracks of rocks, the large over break cause a structural stability problem in tunnel, and the back charging of over break is very important subject, because the undoing of back charging cause the drop of crashed rocks and serious problem in the stability of tunnel lining. Therefore, the theory of blast is studied and purpose the structural analysis of back charging and propose the safe method about the drop of crashed rocks.
규소/질화규소 비가 자전연소합성공정을 이용한 다공질 질화규소 세라믹스의 미세구조와 특성에 미치는 영향
김동백,박동수,한병동,정연길,Kim, Dong-Baek,Park, Dong-Su,Han, Byeong-Dong,Jeong, Yeon-Gil 한국기계연구원 2004 硏究論文集 Vol.34 No.-
Porous silicon nitride ceramics were prepared by Self-propagating High Temperature Synthesis from silicon powder, silicon nitride powder and the pore-forming precursor. The microstructure, porosity and the flexural strength of the porous silicon nitride ceramics were varied according to the Si/$Si_3N_4$ ratio, size and amount of the pore-forming precursors. Some samples exhibited as high flexural strength as $162\pm24$ MPa. The high strength is considered to result from the fine pore size and the strong bonding among the silicon nitrid particles.
김동백(Kim Dong-Baek),신경재(Shin Kyung-Jae) 대한건축학회 2011 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.31 No.2(구조계)
Brittle failures unexpected were founded in steel moment connection when the Northridge earthquake occurred. In particular, beam flange of WUF-B was forced to carry out more load due to a bolt slippage. As results of that, a crack initiated at weld access hole and leads a connection to reach failure. This paper studied influences of three parameters affecting connection performance, i.e., consisting of access hole, beam attachment and panel zone strength ratio. The analysis result showed there are a significant stress concentration in the standard access hole. An welded beam-web connection improved ductility capacity than bolted connection. And as panel zone strength ratio is smaller, plastic deformation of connection becomes larger.
철근콘크리트 공동주택의 평면확장을 위한 연결부의 전단성능 평가에 관한 연구
김동백 ( Dong Baek Kim ) 한국안전학회(구 한국산업안전학회) 2015 한국안전학회지 Vol.30 No.2
Nowadays, remodeling cases for some apartment like Hyundai through the support of government are reported. Conventionally, balcony and aisle are extended for additional private area or balcony which is supported by new frame is extended. In extension work at site, dowel bar is conventionally inserted in old concrete slab for connection with old and new slab, however, an examination for structural safety is rarely performed prior to construction, if ever, vertical load is only considered for structural analysis. When conventionally connected structures are exposed to earthquake, the old and new structures have individual earthquake behavior with different mode, which may lead the elimination of resistance to earthquake in new structures. As of this reason, new detailing connection system which can have light weight and sufficient ductility performance is developed for application to domestic extension works. Additionally, user manual and specification are also developed for fertilization of application for the developed technology.
교량교대구조물의 수화열 및 온도응력에 대한 실험적 연구
권기준,김동백,Kwon. Ki-Jun,Kim. Dong-Baek 한국방재학회 2006 한국방재학회논문집 Vol.6 No.2
콘크리트 댐, 원자력발전소 및 항만구조물등의 대형구조물을 시공하기 위해서는 짧은 기간에 막대한 양의 콘크리트를 타설하게 된다. 매스콘크리트 구조물을 시공하는 단계에서 발생되는 수화열은 심각한 온도균열을 발생시켜 본래의 기능수행능력과 사용수명에 있어서 심각한 저하를 초래할 수 있다. 본 연구에서는 매스콘크리트 구조물의 대표적인 예라고 할 수 있는 교대구조물에 대하여 수화열 및 온도응력을 사전해석하고 그 결과를 바탕으로 구조물 성능확보를 위한 온도균열제어대책을 제시하였으며, 제시된 대책을 바탕으로 이루어진 시공현장에서 교대기초부 및 본체부에서의 온도분포와 응력을 계측하고 온도균열 발생양상을 관찰하여 제시된 대책의 타당성을 단계별로 확인하였다. Recently, the massive concrete structures have been increasingly built in Korea. Many reinforced concrete structures have been reported to suffer from cracking in construction stages due to heat of hydration arising from mass concrete. This cracking may cause some serious durability problems and thus reduces the safety and service life of the structures. In this study, the stresses, strains, and temperatures were measured and the crack widths and crack Patterns were also observed in the footing and abutment structures. And the causes and mechanism in thermal cracking in the footing and abutment structures are thoroughly analysed. The comparisons of test results with analysis have been made. Efficient crack control techniques were developed form the experimental and analytical studies.