http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Unsteady aerodynamic forces on a vibrating long-span curved roof
Wei Ding,Yasushi Uematsu,Mana Nakamura,Satoshi Tanaka 한국풍공학회 2014 Wind and Structures, An International Journal (WAS Vol.19 No.6
The present paper discusses the characteristics of unsteady aerodynamic forces on long-span curved roofs. A forced vibration test is carried out in a wind tunnel to investigate the effects of wind speed, vibration amplitude, reduced frequency of vibration and rise/span ratio of the roof on the unsteady aerodynamic forces. Because the range of parameters tested in the wind tunnel experiment is limited, a CFD simulation is also made for evaluating the characteristics of unsteady aerodynamic forces on the vibrating roof over a wider range of parameters. Special attention is paid to the effect of reduced frequency of vibration. Based on the results of the wind tunnel experiment and CFD simulation, the influence of the unsteady aerodynamic forces on the dynamic response of a full-scale long-span curved roof is investigated on the basis of the spectral analysis
A study on load-sharing structure of multi-stage planetary transmission system
Wei Sun,Xiang Liu,Jing Wei,Aiqiang Zhang,Xin Ding,Xinglong Hu 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.4
Unequal load distribution is a crucial factor in decreasing bearing capacity and stability of the planetary transmission system. In thispaper, a dynamical model of two-stage helical planetary gear transmission system is established based on lumped-parameter method andLagrange general function. Nonlinearity of gear tooth backlash and error is taken into account. Four load-sharing structures are proposedto study the load-sharing performance. A method to calculate dynamic sensitivity of load-sharing coefficient to errors is presented thatcan provide a reference to component precision determination in order to make planetary system have a better load distribution. Finally, anumerical method of load-sharing performance is validated by a test. These results provide fundamental basis for multi-stage planetarygear transmission system design.
Prediction methods on tunnel-excavation induced surface settlement around adjacent building
Ding, Zhi,Wei, Xin-jiang,Wei, Gang Techno-Press 2017 Geomechanics & engineering Vol.12 No.2
With the rapid development of urban underground traffic, the study of soil deformation induced by subway tunnel construction and its settlement prediction are gradually of general concern in engineering circles. The law of soil displacement caused by shield tunnel construction of adjacent buildings is analyzed in this paper. The author holds that ground surface settlement based on the Gauss curve or Peck formula induced by tunnel excavation of adjacent buildings is not reasonable. Integrating existing research accomplishments, the paper proposed that surface settlement presents cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics when the tunnel is respectively under buildings, within the scope of the disturbance and outside the scope of the disturbance. Calculation formulas and parameters on cork distribution curve and skewed distribution curve were put forward. The numerical simulation, experimental comparison and model test analysis show that it is reasonable for surface settlement to present cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics within a certain range. The research findings can be used to make effective prediction of ground surface settlement caused by tunnel construction of adjacent buildings, and to provide theoretical guidance for the design and shield tunnelling.
Ding Yu,Wang Ma-Yin,Yang Ding-Hai,Hao Dai-Cheng,Li Wei-Shi,Ling Peng,Xie Shang-Qian 한국유전학회 2023 Genes & Genomics Vol.45 No.12
Background Phalaenopsis is an important ornamental plant that has great economic value in the world flower market as one of the most popular flower resources. Objective To investigate the flower colour formation of Phalaenopsis at the transcription level, the genes involved in flower color formation were identified from RNA-seq in this study. Methods In this study, white and purple petals of Phalaenopsis were collected and analyzed to obtained (1) differential expression genes (DEGs) between white and purple flower color and (2) the association between single nucleotide polymorphisms (SNP) mutations and DEGs at the transcriptome level. Results The results indicated that a total of 1,175 DEGs were identified, and 718 and 457 of them were up- and down-regulated genes, respectively. Gene Ontology and pathway enrichment showed that the biosynthesis of the secondary metabolites pathway was key to color formation, and the expression of 12 crucial genes (C4H, CCoAOMT, F3’H, UA3’5’GT, PAL, 4CL, CCR, CAD, CALDH, bglx, SGTase, and E1.11.17) that are involved in the regulation of flower color in Phalaenopsis. Conclusion This study reported the association between the SNP mutations and DEGs for color formation at RNA level, and provides a new insight to further investigate the gene expression and its relationship with genetic variants from RNA-seq data in other species.
Ding, Wei-Wei,Zou, Zao-Jian,Wu, Jing-Ping,Huang, Bai-Gang The Society of Naval Architects of Korea 2019 International Journal of Naval Architecture and Oc Vol.11 No.2
Bragg reflection of water waves by three kinds of surface-piercing fixed structures with rectangular, cosinoidal and triangular shapes is studied. Boundary element method is used to analyze the wave scattering by these structures based on the linear wave theory. Results of reflection and transmission coefficients are validated by comparing with those available in literature. These structures with proper configurations are proved to be effective in attenuating waves by using Bragg reflection, and the triangular structures are found to be the best choices among the structures with same width and same area. Systematic calculations are then carried out for the triangular structures by varying the number, the draft, the width, the gap and the combination of width and gap of the structures to analyze their influences on the characteristics of Bragg reflection. The results are of reference values for design of the structures to attenuate waves based on the Bragg reflection.
A Computer Model for Simulating the Bicycle Rider's Behavior in a Virtual Riding System
( Wei-long Ding ),( Xiao Ding ),( Kai Chen ),( Zang-xin Wan ),( Yan Xu ),( Yuan-jing Feng ) 한국인터넷정보학회 2020 KSII Transactions on Internet and Information Syst Vol.14 No.3
People are increasingly demanding to experience realistic behavior of virtual characters in computer games. In this article, we build a computer model for simulating a bicycle rider’s behavior in a virtual riding system. A method to calculate the speed of a bicycle rider is proposed to improve the reality in a virtual riding system. In this method, the property of physical energy is introduced, and the bicycle-riding speed is calculated in real time according to the relationship between the rider’s physical energy and bicycle-riding speed. Then based on the analysis of the behavior of a cyclist in a real competition, various behaviors of the virtual rider are designed and a behavior-tree for the virtual bicycle rider is constructed accordingly. On the basis of these, a virtual riding system is developed. The experiments results show that our system can simulate the behavior of a virtual bicycle rider, and thus encourage exercise on a stationary bicycle.
Ding, Kun,Wang, Xiang,Zhai, Quan-Xin,Xu, Jun-Wei,Zhang, Jing-Wei,Liu, Hai-Hao The Korean Institute of Power Electronics 2014 JOURNAL OF POWER ELECTRONICS Vol.14 No.4
The power-voltage (P-V) curve of photovoltaic (PV) arrays connected in parallel to bypass diodes would have several local maximum power points (LMPP) under partial shading conditions (PSC). Conventional maximum power point tracking (MPPT) methods fail to search for the global maximum power point (MPP) because the searched peak point may remain at the LMPP on the P-V curve under PSC. This study proposes an improved MPPT algorithm to ensure that PV arrays operate at global maximum power point (GMPP) under PSC. The proposed algorithm is based on a critical study and a series of observations of PV characteristics under PSC. Results show the regularity of voltage interval between LMPPs. The algorithm has the advantages of rapidly reaching GMPP, maintaining stability, and recovering GMPP quickly when the operating condition changes. Simulation and experimental results demonstrate the feasibility of the proposed algorithm.
Unsteady aerodynamic forces on a vibrating long-span curved roof
Ding, Wei,Uematsu, Yasushi,Nakamura, Mana,Tanaka, Satoshi Techno-Press 2014 Wind and Structures, An International Journal (WAS Vol.19 No.6
The present paper discusses the characteristics of unsteady aerodynamic forces on long-span curved roofs. A forced vibration test is carried out in a wind tunnel to investigate the effects of wind speed, vibration amplitude, reduced frequency of vibration and rise/span ratio of the roof on the unsteady aerodynamic forces. Because the range of parameters tested in the wind tunnel experiment is limited, a CFD simulation is also made for evaluating the characteristics of unsteady aerodynamic forces on the vibrating roof over a wider range of parameters. Special attention is paid to the effect of reduced frequency of vibration. Based on the results of the wind tunnel experiment and CFD simulation, the influence of the unsteady aerodynamic forces on the dynamic response of a full-scale long-span curved roof is investigated on the basis of the spectral analysis.
Ding, Yueyun,Qian, Li,Wang, Li,Wu, Chaodong,Li, DengTao,Zhang, Xiaodong,Yin, Zongjun,Wang, Yuanlang,Zhang, Wei,Wu, Xudong,Ding, Jian,Yang, Min,Zhang, Liang,Shang, Jinnan,Wang, Chonglong,Gao, Yafei Asian Australasian Association of Animal Productio 2020 Animal Bioscience Vol.33 No.2
Objective: Considering the physiological and clinical importance of leptin receptor (LEPR) in regulating obesity and the fact that porcine LEPR expression is not known to be controlled by lncRNAs and miRNAs, we aim to characterize this gene as a potential target of SSC-miR-323 and the lncRNA TCONS_00010987. Methods: Bioinformatics analyses revealed that lncRNA TCONS_00010987 and LEPR have SSC-miR-323-binding sites and that LEPR might be a target of lncRNA TCONS_00010987 based on cis prediction. Wild-type and mutant TCONS_00010987-target sequence fragments and wild-type and mutant LEPR 3'-UTR fragments were generated and cloned into pmiRRB-REPORT<sup>TM</sup>-Control vectors to construct respective recombinant plasmids. HEK293T cells were co-transfected with the SSC-miR-323 mimics or a negative control with constructs harboring the corresponding binding sites and relative luciferase activities were determined. Tissue expression patterns of lncRNA TCONS_00010987, SSC-miR-323, and LEPR in Anqing six-end-white (AQ, the obese breed) and Large White (LW, the lean breed) pigs were detected by real-time quantitative polymerase chain reaction; backfat expression of LEPR protein was detected by western blotting. Results: Target gene fragments were successfully cloned, and the four recombinant vectors were constructed. Compared to the negative control, SSC-miR-323 mimics significantly inhibited luciferase activity from the wild-type TCONS_00010987-target sequence and wild-type LEPR-3'-UTR (p<0.01 for both) but not from the mutant TCONS_00010987-target sequence and mutant LEPR-3'-UTR (p>0.05 for both). Backfat expression levels of TCONS_00010987 and LEPR in AQ pigs were significantly higher than those in LW pigs (p<0.01), whereas levels of SSC-miR-323 in AQ pigs were significantly lower than those in LW pigs (p<0.05). LEPR protein levels in the backfat tissues of AQ pigs were markedly higher than those in LW pigs (p<0.01). Conclusion: LEPR is a potential target of SSC-miR-323, and TCONS_00010987 might act as a sponge for SSC-miR-323 to regulate LEPR expression.