고려인삼의 홍삼 품질평가요인 분석

정찬문,엄유리,김상민,이이,이문순 忠北大學校 農業科學硏究所 2012 農業科學硏究 Vol.28 No.2

This study was conducted to evaluate the elements affect on the quality of red ginseng. For that purpose, we surveyed the relationship between the red ginseng quality and the properties of material ginseng, processing methods, root year, root size, production location, and cultivation methods. Six-year old raw ginseng caused higher inside cavity than younger one did and larger sized ginseng increased outside cracking and inside cavity but decreased inside white than smaller sized one did. The production location did not affect the quality of red ginseng. The red ginseng processed with the ginseng grown on upland field showed lower outside cracking and inside cavity than the red ginseng processed with the ginseng grown on paddy field did. In terms of cultivation method, transplanting method showed lower inside cavity and inside white rates than direct sowing method did. In conclusion, ginseng cultivation location and cultivation method affected on the quality of the red ginseng more than the root age, root size and production location did.

저주파수 및 저입력전압용 박막형 다중접합 열전변환기

황찬순,이형주,김진섭,이정희,박세일,권성원 한국센서학회 2002 센서학회지 Vol.11 No.3

저주파수의 저전압용 크로멜-알루멜 다중접합 열전변환기를 개발하고자 NiCr 히터의 두께를400 nm, 600 nm 및 800 nm로 변화시켰다. 40 Hz∼10 kHz의 직류 역방향 주파수 범위로 0.5 V의 교류 실효전압을 열전변환기에 인가시켰을 때 히터의 두께가 400 nm인 열전변환기가 ±0.51∼±1.69 ppm 범위의 열전효과에 의한 교류-직류 전압 변환오차를 나타내었고, 열전효과 및 주파수에 의한 교류-직류 변환오차는 40 Hz∼l MHz의 주파수 범위에서 ±40∼±115 ppm 범위를 나타내어, 저주파수의 저전압용으로 사용할 수 있었다. NiCr-heaters with three different thicknesses ranging from 400 nm to 800 nm were fabricated and their characteristics were compared for the purpose of developing a chromel-alumel multijunction thermal converter for low input voltage with low frequency. The thermoelectric effect-induced AC-DC voltage transfer difference of the thermal converter with a built-in NiCr-heater of 400 nm-thickness was ±0.51∼±1.69 ppm in the DC reversing frequency of 40 Hz∼10 kHz with appling 0.5 V_rms and the difference was increased to ±40∼±115 ppm in the frequency of 40 Hz~l MHz, when both thermoelectric effects and frequency effects were considered, showing the thermal converter would be suitable for the low input voltage application with low frequency.

초마디 멀티프런탈 방법의 효율적인 구현

박찬규,박순달 한국경영과학회 2002 經營 科學 Vol.19 No.2

In this paper, some efficient implementation techniques for the multifrontal method, which can be used to compute the Cholesky factor of a symmetric positive definite matrix, are presented. In order to use the cache effect in the cache-based computer architecture, a hybrid method for factorizing a frontal matrix is considered. This hybrid method uses the column Cholesky method and the submatrix Cholesky method alternatively. Experiments show that the hybrid method speeds up the performance of the supernodal multifrontal method by 5%~10%, and it is superior to the Cholesky method is some problems with dense columns or large frontal matrices.

다람쥐 원숭이의 Bordetella bronchiseptica 감염 예 : Saimiri sciureus

배유찬,윤순식,이희수,진영화 한국임상수의학회 2003 한국임상수의학회지 Vol.20 No.4

A dead, female, 3 years old, squirrel monkey (Saimiri sciureus) was submitted and examined. Before death the monkey has showed lethargy, recumbency and inappetence since November 14, 2001 and died in November 17. Grossly much fibrin was deposited on the pleura of right lung, pericardium, and diaphragm(pleural part). And reddening of right lung was seen. Histopathologically lung showed severe fibrinous pleuritis, severe edema, thrombosis, and focal necrosis in parenchyma. Also much fibrin and mononuclear cells were deposited on the pericardium. In bacterial culture on the pleura and parenchyma of lung, and pericardium, B. bronchiseptica was isolated. Therefore we confirmed this case as the fatal case by B. bronchiseptica in squirrel monkey.

발포폴리스티렌비드를 사용한 경량골재 콘크리트의 패널적용을 위한 실험적 연구

사순헌,이종찬,지석원,정광량,서치호 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

Because lightweight concrete with expanded polystyrene beads has properties of low density, low heat conductivity, it can be used in lightweight structural material and heat insulation layer. But application of this material in buildings is insufficient yet. One of application in building is panel, like non-structural partition used inside, has low compressive strength. So the purpose of this study is to lead the fundamental data to improve low strength of lightweight concrete with polystyrene beads by mixing silica fume and curing methods for application to dry lightweight panel of building, which is based on the mechanical property of lightweight concrete using polystyrene beads, and to examine suitability of polystyrene beads as composition material of panel from the above result. Unit volume weight of fresh concrete is 0.5-0.61t/m³ in EPSB substitution rate 70% and 0.27 -0.33t/m³ in EPSB substitution rate 80%, and compressive strength as increase of silica fume substitution rate is increased but, batch in EPSB substitution rate 80% has low compressive strength rate. Compressive strength by curing method was higher by high temperature(60˚C, seal up).

자동차 차체용 Galvalume 강판의 용접성에 관한 연구

김순경,김민주,전언찬 동아대학교 공과대학부설 생산기술연구소 1998 生産技術硏究所硏究論文集 Vol.3 No.1

An extensive corrosion study was initiated by galvalume steel sheet manufacturing company to clarify the corrosion behavior of zinc and zinc-alloy coated automotive sheet steel in out panel and electrical application. Since the early 1980's the use of zinc and aluminum alloy coated steel for vehicular corrosion protection has increased dractically. Car and electonic products makers, however, are not consistent in their choice of specific galvalume types or coating weights. This paper presents an overview of the program and some initial test results on the of weldability, lifetime on the electode tip shape of spot welder and corrosion protection.

저탄소강의 풀림 사이클에 대한 예측 프로그램 개발

김순경,이승수,김문경,전언찬 동아대학교 공과대학부설 생산기술연구소 1997 生産技術硏究所硏究論文集 Vol.2 No.2

The cold spot of the coil is very important in the BAF(Batch annealing furnace) annealing process. Because of the annealing cycle time in the BAF, annealing was decided on the cold spot of the coil. So, we tested the temperature variation of cold spot and the correctness of computer simulation at the annealing furnace using the Ax atmospheric gas. As a result of several investigations. We confirmed the following characteristics ; Annealing cycle was changed under the influence of the strip surface condition and the strip tension. The cold spot of coil was the mid point of the B coil in the Ax atmospheric gas. And, the power of recirculation fan is very important in the high convection annealing furnaces.

분위기 가스가 냉연강판의 성형성에 미치는 영향

김순경,이승수,전언찬 동아대학교 공과대학부설 생산기술연구소 1998 生産技術硏究所硏究論文集 Vol.3 No.1

Development on the mechanical properties of steel for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment in the BAF, mechanical properties was decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the Ax atmospheric gas and the HNx atmospheric gas. As a result of several investigation. We confirmed the following characteristics ; mechanical properties was changed under the influence of the annealing cycle and the atmospheric gas. And, We have some result according to heat treatment method. 1. elongation one of the mechanical properties was good NHx BAF than Ax BAF. 2. The cost of heat treatment was expensive HNx BAF than Ax BAF. We will arrange a annealing cycle in order to gain a good quality of CQ and DDQ Sheet. Because Even if we save a cast, mechanical properties were no better.

75% H₂BAF의 소둔특성에 관한 연구

김순경,전언찬 동아대학교 공과대학 부설 한국자원개발연구소 1995 硏究報告 Vol.19 No.2

A cold spot temperature control system for the BAF(batch annealing furnace)has been established in order to reduce energy consumption to improve productivity and stabilize the properties of products. Therefore we confirmed for the improving of material quality (eq. even and consistent tempering, high surface cleanliness, reduced carbon depositing etc.), increasing of output, comparison of annealing cycle time, reducting of annealing cost and distrubition of cold spot temperature according to BAF type. The use of hydrogen instead of the protective gas, combined with high convection in batch annealing furnaces, has shown that considerable increases in furnace output and material quality are attainable. Owing to the low density, high diffusion and reducing character of hydrogen, a better transfer resulting in uniform material temperatures and improved coil surfaces can be achieved.

구상흑연 주철의 열처리 조건이 기계적 성질에 미치는 영향

전언찬,정하돈,김순경,김용직 東亞大學校 大學院 1998 大學院論文集 Vol.23 No.-

Because the spheroidal graphite cast iron, the cast iron cristallized the graphite to sphericity during the solidification process after annexing Mg etc to the general grey cast iron furnace, the form of the graphite is more spheric than the grey cast iron, has the less notch effect, it is a very excellent metal material on the strength an toughness due to the decrease of the stress concentraion. Therefore, the case which uses it instead of forfing or case steel material used for the industrial machinery parts of various kinds and automobile parts is increasing gradually. The purpose of this study is to increase abration resistance after improving the hardness of the sphericity graphite cast iron used as the valve seat of air compressor. We obtained the following result through experiment on the change of structure and mechanical property according to the heat treat cycle. Because the abration resistance is closely related with the volume of martensite, the hardness and the aration resistence have improved and the structure of martensite has increased as the cooling rate is fast. Therefore, the best heat treatment which considers tensile strength and elongation percentage, the most suitable method, is that austempering is done the constant temperature process about 2 hours at 750℃ then the cooling is done in the condition of opened furnare after making the condition of austenitizing do the constant temperature process ofr 2 hours at 950℃.