Nonlinear analysis of concrete-filled steel composite columns subjected to axial loading

Bahrami, Alireza,Badaruzzamana, Wan Hamidon Wan,Osmanb, Siti Aminah Techno-Press 2011 Structural Engineering and Mechanics, An Int'l Jou Vol.39 No.3

This paper investigates the nonlinear analysis of concrete-filled steel composite columns subjected to axial loading to predict the ultimate load capacity and behaviour of the columns. Finite element software LUSAS is used to conduct the nonlinear analyses. The accuracy of the finite element modelling is verified by comparing the result with the corresponding experimental result reported by other researchers. Nonlinear analyses are done to study and develop different shapes and number of cold-formed steel sheeting stiffeners with various thicknesses of cold-formed steel sheets. Effects of the parameters on the ultimate axial load capacity and ductility of the concrete-filled steel composite columns are examined. Effects of variables such as concrete compressive strength $f_c$ and cold-formed steel sheet yield stress $f_{yp}$ on the ultimate axial load capacity of the columns are also investigated. The results are shown in the form of axial load-normalized axial shortening plots. It is concluded from the study that the ultimate axial load capacity and behaviour of the concrete-filled steel composite columns can be accurately predicted by the proposed finite element modelling. Results in this study demonstrate that the ultimate axial load capacity and ductility of the columns are affected with various thicknesses of steel sheets and different shapes and number of stiffeners. Also, compressive strength $f_c$ of the concrete and yield stress $f_{yp}$ of the cold-formed steel sheet influence the performance of the columns significantly.

Correction to: The neuroprotective effects of stimulation of NMDA receptors against POX-induced neurotoxicity in hippocampal cultured neurons; a morphometric study

Bahrami Farideh,Zahra Bahari,Reyhaneh Abolghasemi,Lida Golmanesh,Gholam Hossein Meftahi 대한독성 유전단백체 학회 2021 Molecular & cellular toxicology Vol.17 No.1

Dietary Intake of Polyphenols and the Risk of Breast Cancer: a Case-Control Study

Bahrami Alireza,Makiabadi Elham,Jalali Saba,Heidari Zeinab,Assadi Mojan,Rashidkhani Bahram 한국임상영양학회 2021 Clinical Nutrition Research Vol.10 No.4

Despite mounting evidence that dietary polyphenols might have a protective role against the risk of breast cancer (BC), few studies have assessed the relationship between intake of polyphenol classes and subclasses with BC. Thus, we examined the relationship between dietary polyphenol classes and individual polyphenol subclasses and the risk of BC. Overall, 134 newly diagnosed BC patients and 267 healthy hospitalized controls were studied. Dietary intake was assessed using a validated 168-item food frequency questionnaire (FFQ). To estimate dietary intake of polyphenols, polyphenol content (flavonoids, lignans, stilbenes and phenolic acids) of 80 food items were derived from an updated version of the phenol explorer database containing information on the effects of food processing on polyphenol content. The dietary polyphenol intake was calculated by matching the subjects' food consumption data with our polyphenol content database. Multivariate logistic regression was used to estimate odds ratios (ORs) and 95% confidence intervals (CIs). Controls had higher intake of total polyphenol (marginally significant; p = 0.07), hydroxycinnamic acid (marginally significant; p = 0.05) and lignan (p = 0.01). After adjusting for potential confounders, high consumption of lignans (highest vs. lowest tertile: OR, 0.51; 95% CI, 0.26–0.97; p for trend = 0.04) associated with decreased risk of BC. There was no significant relationship between intake of other polyphenols and risk of BC. Our findings suggest that high lignan intake is associated with a reduced risk of BC.

7T-guided super-resolution of 3T MRI

Bahrami, Khosro,Shi, Feng,Rekik, Islem,Gao, Yaozong,Shen, Dinggang Published for the American Association of Physicis 2017 Medical physics Vol.44 No.5

<P>Conclusions: We propose a novel method for prediction of high-resolution 7T-like MR images from low-resolution 3T MR images. Our predicted 7T-like MR images demonstrate better spatial resolution compared to 3T MR images, as well as prediction results by other comparison methods. Such high-quality 7T-like MR images could better facilitate disease diagnosis and intervention. (C) 2017 American Association of Physicists in Medicine</P>

Cyber Kill Chain-Based Taxonomy of Advanced Persistent Threat Actors: Analogy of Tactics, Techniques, and Procedures

Bahrami, Pooneh Nikkhah,Dehghantanha, Ali,Dargahi, Tooska,Parizi, Reza M.,Choo, Kim-Kwang Raymond,Javadi, Hamid H.S. Korea Information Processing Society 2019 Journal of information processing systems Vol.15 No.4

The need for cyber resilience is increasingly important in our technology-dependent society where computing devices and data have been, and will continue to be, the target of cyber-attackers, particularly advanced persistent threat (APT) and nation-state/sponsored actors. APT and nation-state/sponsored actors tend to be more sophisticated, having access to significantly more resources and time to facilitate their attacks, which in most cases are not financially driven (unlike typical cyber-criminals). For example, such threat actors often utilize a broad range of attack vectors, cyber and/or physical, and constantly evolve their attack tactics. Thus, having up-to-date and detailed information of APT's tactics, techniques, and procedures (TTPs) facilitates the design of effective defense strategies as the focus of this paper. Specifically, we posit the importance of taxonomies in categorizing cyber-attacks. Note, however, that existing information about APT attack campaigns is fragmented across practitioner, government (including intelligence/classified), and academic publications, and existing taxonomies generally have a narrow scope (e.g., to a limited number of APT campaigns). Therefore, in this paper, we leverage the Cyber Kill Chain (CKC) model to "decompose" any complex attack and identify the relevant characteristics of such attacks. We then comprehensively analyze more than 40 APT campaigns disclosed before 2018 to build our taxonomy. Such taxonomy can facilitate incident response and cyber threat hunting by aiding in understanding of the potential attacks to organizations as well as which attacks may surface. In addition, the taxonomy can allow national security and intelligence agencies and businesses to share their analysis of ongoing, sensitive APT campaigns without the need to disclose detailed information about the campaigns. It can also notify future security policies and mitigation strategy formulation.

Ubiquitous formation of bulk Dirac cones and topological surface states from a single orbital manifold in transition-metal dichalcogenides

Bahramy, M. ,S.,Clark, O. ,J.,Yang, B.-J.,Feng, J.,Bawden, L.,Riley, J. ,M.,Marković,, I.,Mazzola, F.,Sunko, V.,Biswas, D.,Cooil, S. ,P.,Jorge, M.,Wells, J. ,W.,Leandersson, M Nature Publishing Group, a division of Macmillan P 2018 NATURE MATERIALS Vol.17 No.1

Transition-metal dichalcogenides (TMDs) are renowned for their rich and varied bulk properties, while their single-layer variants have become one of the most prominent examples of two-dimensional materials beyond graphene. Their disparate ground states largely depend on transition metal d-electron-derived electronic states, on which the vast majority of attention has been concentrated to date. Here, we focus on the chalcogen-derived states. From density-functional theory calculations together with spin- and angle-resolved photoemission, we find that these generically host a co-existence of type-I and type-II three-dimensional bulk Dirac fermions as well as ladders of topological surface states and surface resonances. We demonstrate how these naturally arise within a single p-orbital manifold as a general consequence of a trigonal crystal field, and as such can be expected across a large number of compounds. Already, we demonstrate their existence in six separate TMDs, opening routes to tune, and ultimately exploit, their topological physics.

Investigating the capabilities of multispectral remote sensors data to map alteration zones in the Abhar area, NW Iran

Bahrami Yousef,Hassani Hossein,Maghsoudi Abbas 한국자원공학회 2021 Geosystem engineering Vol.24 No.1

Economic mineralization is often associated with alterations that are identifiable by remote sensing coupled geological analysis. The present paper aims to investigate the capabilities of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), Landsat-8 and Sentinel-2 data to map iron oxide and hydrothermally alteration zones in the Abhar area, NW Iran. To achieve this goal, the principal component analysis (PCA) and two machine learning methods including support vector machine (SVM) and artificial neural network (ANN) were employed. PCA method was carried out on four bands of all data and then the appropriate principal components were selected to map alterations. Due to the high precision of ASTER data within the short-wave infrared range, these data results are more satisfactory compared with Landsat-8 and Sentinel-2 sensors in detecting hydrothermally alterations through the PCA technique. Based on the obtained maps, the performance of all data types was approximately similar in the detection of iron oxide zones. Our desired data were classified by two methods of SVM and ANN. The results of these algorithms were presented as confusion matrix. According to these results, for hydrothermally alterations, ASTER data showed better performance in both SVM and ANN than other datasets by gaining values greater than 90%. These data did not perform well in the iron oxide zones detection, while Landsat-8 and Sentinel-2 have been more successful. For iron oxide, based on confusion matrix, Landsat-8 data have obtained the values of 78% and 79% through SVM and ANN algorithms, respectively, and also Sentinel-2 has acquired the values of 88.11% and 90.55% via SVM and ANN, respectively. Therefore, to map iron oxide zones, Sentinel-2 data are more favorable than Landsat-8 data. In addition, the ANN algorithm in ASTER data has represented the highest overall accuracy and Kappa coefficient with the values of 88.73% and 0.8453, respectively.

Physics-based Surrogate Optimization of Francis Turbine Runner Blades, Using Mesh Adaptive Direct Search and Evolutionary Algorithms

Bahrami, Salman,Tribes, Christophe,von Fellenberg, Sven,Vu, Thi C.,Guibault, Francois Korean Society for Fluid machinery 2015 International journal of fluid machinery and syste Vol.8 No.3

A robust multi-fidelity optimization methodology has been developed, focusing on efficiently handling industrial runner design of hydraulic Francis turbines. The computational task is split between low- and high-fidelity phases in order to properly balance the CFD cost and required accuracy in different design stages. In the low-fidelity phase, a physics-based surrogate optimization loop manages a large number of iterative optimization evaluations. Two derivative-free optimization methods use an inviscid flow solver as a physics-based surrogate to obtain the main characteristics of a good design in a relatively fast iterative process. The case study of a runner design for a low-head Francis turbine indicates advantages of integrating two derivative-free optimization algorithms with different local- and global search capabilities.

Physicochemical and Sensorial Properties of Probiotic Yogurt as Affected by Additions of Different Types of Hydrocolloid

Bahrami, Masoud,Ahmadi, Dariush,Alizadeh, Mohammad,Hosseini, Fakhrisadat Korean Society for Food Science of Animal Resource 2013 한국축산식품학회지 Vol.33 No.3

The main attributes of yogurt that affect consumer satisfaction are taste, consistency, and a firm texture. This study evaluates the influence of xanthan gum, barley beta-glucan, and guar gum in concentrations of 0.05%, 0.1%, 0.2%, and 0.3% on probiotic yogurt. The set-type yogurt samples were prepared by using raw cow's milk. The statistical analysis showed that none of these gum additions had any marked effect on pH, titratable acidity, total solids content, and probiotic bacteria counts of yogurt samples. Evaluations for syneresis and water-holding capacity (WHC) in the yogurt samples were affected by the type and concentration of the stabilizer. Yogurts treated with 0.1% xanthan gum and 0.3% beta-glucan recorded the highest WHC and the least syneresis. The largest amount of gel firmness was recorded in yogurt samples treated with 0.2% xanthan gum and 0.3% beta-glucan. Yogurt samples treated with 0.1% xanthan gum and 0.3% beta-glucan were considered acceptable by trained panelists and gained the highest scores in sensory evaluations. The correlation coefficient between the amount of syneresis, WHC and stiffness of texture was significant compared to scores for sensory evaluation (p<0.01). Results for effects of guar gum on the tested parameters were contrary to the results expected from a gum. According to this study, the use of xanthan gum and beta-glucan are highly recommended for low-fat yogurt production.

A new approach for calculation of the neutron noise of power reactor based on Telegrapher's theory: Theoretical and comparison study between Telegrapher's and diffusion noise

Bahrami, Mona,Vosoughi, Naser Korean Nuclear Society 2020 Nuclear Engineering and Technology Vol.52 No.4

The telegrapher's theory was used to develop a new formulation for the neutron noise equation. Telegrapher's equation is supposed to demonstrate a more realistic approximation for neutron transport phenomena, especially in comparison to the diffusion theory. The physics behind such equation implies that the signal propagation speed is finite, instead of the infinite as in the case of ordinary diffusion. This paper presents the theory and results of the development of a new method for calculation of the neutron noise using the telegrapher's equation as its basis. In order to investigate the differences and strengths of the new method against the diffusion based neutron noise, a comparison was done between the behaviors of two methods. The neutron noise based on SN transport considered as a precision measuring point. The Green's function technique was used to calculate the neutron noise based on telegrapher's and diffusion methods as well as the transport. The amplitude and phase of Green's function associated with the properties of the medium and frequency of the noise source were obtained and their behavior was compared to the results of the transport. It was observed, the differences in some cases might be considerable. The effective speed of propagation for the noise perturbations were evaluated accordingly, resulting in considerable deviations in some cases.