http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
FFS모드의 투과율 향상을 위한 새로운 화소전극 구조제안
이원준,박우상,Lee, Won-Jun,Park, Woo-Sang 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.11
In this study, we propose a new pixel edge shape of the fringe field switching(FFS) mode which ensures more stable movement of liquid crystal molecules and higher transmittance at the edge part. the electro optical properties were calculated 3-dimensionally using by commercially available "Techwiz LCD". From the simulation results, we showed that the dynamic stability of liquid crystal molecules was obtained in a new pixel structure. We also revealed that the transmittance of the new pixel structure increased more than 6 % compared to that of the conventional pixel structure.
잉크젯 프린팅용 pink-red 수계 무기잉크의 제조 및 특성평가
이원준,황해진,한규성,조우석,김진호,Lee, Won-Jun,Hwang, Hae-Jin,Han, Kyu-Sung,Cho, Woo-Suk,Kim, Jin-Ho 한국결정성장학회 2015 韓國結晶成長學會誌 Vol.25 No.1
세라믹 잉크젯 기술은 아트타일, 장식용 도자기 등에 이용되고 있으며, 원료의 효율이 높고 낮은 제작비용으로 다양한 이미지를 빠르고 정확하게 인쇄할 수 있다는 장점을 가지고 있다. 잉크젯 프린팅 타일에 나노세라믹안료를 적용하기 위해서는 안정적인 잉크분산성 확보가 필수적이다. 본 논문에서는 잉크젯 인쇄용 수계 pink-red 세라믹잉크의 특성을 보여주고 있다. $CaCr_{0.1}Sn_{0.8}SiO_5$ 안료는 고상법을 이용하여 합성하였고, 잉크 토출 시 잉크젯 헤드의 노즐 막힘을 방지하기 위해 어트리션밀을 이용하여 분쇄한 안료를 사용 하였다. 수계 세라믹잉크 제조 시 $CaCr_{0.1}Sn_{0.8}SiO_5$ 나노안료의 농도는 10 wt%로 고정하였고, sodium dodecyl sulfate(SDS)를 0.4 wt% 첨가 하였을 때 최적의 분산성을 가지는 것을 확인할 수 있었다. 또한 수계 세라믹 잉크의 원활한 토출을 위해 polyvinyl alcohol(PVA)을 0.18 wt% 첨가하여 점도 조절을 하였다. 제조된 pinkred 세라믹 잉크는 토출 시 $180{\mu}s$ 이후 구형의 단일액적을 형성 하는 것을 확인할 수 있었다. Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.
이원준,여동훈,신효순,정대용,Lee, Won-Jun,Yeo, Dong-Hun,Shin, Hyo-Soon,Jeong, Dea-Yong 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.12
In solid oxide fuel cell system, yttria-stabilized zirconia is generally adopted as the electrolyte, which has high strength and superior oxygen ion conductivity, and the air electrode and the fuel electrode are attached to this. Recently, new structure of 'layered planar SOFC module' was suggested to solve the reliability problem due to the high temperature stability of a sealing agent and a binding material. In this study to materialize the air electrode in a layered planar SOFC module, the LSM ink was coated to form homogeneous electrode in the channel after the ink preparation. As the porosity control agent, PMMA or active carbon powder was adopted with use of a commercial dispersant in ethanol. The optimal amounts of both the porosity control agents and the dispersant were determined. Four (4) vol% of the dispersant for the LSM-PMMA case and 15 vol% for LSM-carbon powder showed the lowest viscosities respectively to indicate the best dispersed states of the slurries. With PMMA and carbon powder, sintered LSM ink shows the relatively homogeneous distributions of pores and with increases of the agents, the porosities increased in both cases. From this, it can be thought that the amount of the PMMA or carbon powder could be used to control the porosity of the LSM ink.
금속불순물 제거를 위한 UV/ozone과 HF 세정연구
이원준,전형탁,Lee, Won-Jun,Jeon, Hyeong-Tak 한국재료학회 1996 한국재료학회지 Vol.6 No.11
반도체 소자가 고집적화 됨에 따라 단위공정의 수가 증가하게 되었고 동시에 실리콘 기판의 오염에 대한 문제가 증가하였다. 실리콘 기판의 주 오염물로는 유기물, 파티클, 금속분순물 등이 있으며 특히, Cu와 Fe과 같은 금속불순물은 이온주입 공정, reactive ion etching, photoresist ashing과 같은 실 공정 중에 1011-1013atoms/㎤정도로 오염이 되고 있다. 그러나 금속불순물 중 Cu와 같은 전기음성도가 실리콘 보다 큰 오염물질은 일반적인 습석세정방법으로는 제거하기 힘들다. 따라서 본 연구에서는 Cu와 Fe과 같은 금속불순물을 제거할 목적을 건식과 습식 세정방법을 혼합한 UV/ozone과 HF세정을 제안하여 실시하였다. CuCI2와 FeCI2 표준용액으로 실리콘 기판을 인위적 오염한 후 split 1(HF-only), split 2 (UV/ozone+HF), split 3 (UV/ozone + HF 2번 반복), split 4(UV/ozone-HF 3번 반복)를 실시하였고 TXRF(Total Reflection X-Ray Fluorescence)와 AFM(Atomic Force Microscope)으로 금속불순물 제거량과 표면거칠기를 각각 측정하였다. 또한 contact angle 측정으로 세정에 따른 표면상태도 측정하였다. TXRF 측정결과 split 4가 가장 적은 양의 금속불순물 잔류량을 보였으며 AFM 분석을 통한 표면거칠기도 가장 작은 RMS 값을 나타내었다. Contact angle 측정 결과 UV/ozone 처리는 친수성 표면을 형성하였고 HF처리는 소수성 표면을 형성하였다.
서스펜션 플라즈마 용사를 이용한 이트리아 안정화 지르코니아 (7.5 wt% Y<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>) 코팅 증착 및 특성
이원준,권창섭,김성원,오윤석,김형태,임대순,Lee, Won-Jun,Kwon, Chang-Sup,Kim, Seongwon,Oh, Yoon-Suk,Kim, Hyung-Tae,Lim, Dae-Soon 한국분말야금학회 2013 한국분말재료학회지 (KPMI) Vol.20 No.6
Yttria-stabilized zirconia (YSZ) coatings are fabricated via suspension plasma spray (SPS) for thermal barrier applications. Three different suspension sets are prepared by using a planetary mill as well as ball mill in order to examine the effect of starting suspension on the phase evolution and the microstructure of SPS prepared coatings. In the case of planetary-milled commercial YSZ powder, a deposited thick coating turns out to have a dense, vertically-cracked microstructure. In addition, a dense YSZ coating with fully developed phase can be obtained via suspension plasma spray with suspension from planetary-milled mixture of $Y_2O_3$ and $ZrO_2$.