http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Quasi-breath-hold (QBH) Biofeedback in Gated 3D Thoracic MRI: Feasibility Study
김태호,이레나,김시용,Kim, Taeho,Pooley, Robert,Lee, Danny,Keall, Paul,Lee, Rena,Kim, Siyong Korean Society of Medical Physics 2014 의학물리 Vol.25 No.2
연구의 목적은 의사호흡정지(QBH) 바이오 피드백이 의료영상획득 시간의 큰변화 없이 잔류 호흡 운동을 조절함으로써 호흡 운동에 의한 영상 오류를 줄이고, 게이트 3차 흉부 자기 공명 영상을 향상시킬 수 있다는 가설을 실험하는 것이다. 가설을 확인하기 위해 건강한 다섯 사람을 대상으로 3T 지멘스 엠알아이의 호흡 탐색기가 포함된 T2 가중 스페이스 엠알 펄스 시퀀스를 이용해 두번의 게이트 자기공명 영상 연구를 시행 하였다: 자유 호흡 상태와 의사호흡정지 바이오 피드백 호흡상태, 의사호흡정지 바이오 피드백 시스템은 알피엠(RPM) 시스템(실시간 위치 관리시스템, 베리안)을 사용하여, 복부의 외부 위치를 측정하고, 음향과 시각적으로 각각의 호흡주기의 90% 위치에서 2초 숨을 정지하도록 안내하는 방법을 사용했다. 평가방법은 의사호흡정지 바이오 피드백 시스템을 이용시 간 상부의 호흡정지모습의 재현성이 게이팅 영역 내에서 향상되는지를 지원자의 실험을 통해 평가하였다. 자유호흡상태와 의사호흡정지 바이오 피드백상태에서 3차 흉부자기공명영상내에 호흡 운동에 의한 영상 오류와 게이팅영역 내에서의 잔류 호흡 운동 조절여부도 함께 평가했다. 또한, 복부 변위의 RMSE도 (제곱근오차) 조사되었다. 의사호흡정지 바이오 피드백방법을 사용함으로 자유호흡의 경우보다 게이트 3차 흉부 엠알 영상에서 폐와 간에서 호흡운동에 의한 영상오류의 감소 결과를 획득했다(영상획득시간: ~6분). 이는 의사호흡정지 바이오 피드백사용시, 게이팅 영역에서 복부 운동 감소와 횡경막의 잔류 움직임 감소가 일치함을 의미한다. 따라서, 알피엠을 통해 얻은 복부 변위의 전체 자료에서평균 RMSE는 (제곱근오차) 자유 호흡의 2.0 mm에 비해 7 mm (67% 감소, p값=0.02)로 감소하였으며, 게이팅영역만을 고려했을때는 자유 호흡의 1.7 mm가 의사호흡정지 바이오 피드백 호흡을 사용함으로써 0.7 mm (58 % 감소, p값=0.14) 로 개선되었다. 선형 피팅을 사용하여 얻은 평균 기준 이동값은 의사호흡정지 바이오 피드백 을 사용하면 자유 호흡 5.5 mm/분보다 0.6 mm/분(89% 감소, p값=0.017)으로 감소되었다. 이 연구는 의사호흡정지 바이오 피드백을 이용해 게이트 3차 흉부 자기 공명 영상 중에 간 상부의 호흡정지 재현성이 향상되는 것을 보여 주었다. 이 시스템은 내부 해부학의 운동을 조절함으로써 게이트 의료 영상과 방사선 치료에 임상적으로 적용 할 수 있다. The aim of the study is to test a hypothesis that quasi-breath-hold (QBH) biofeedback improves the residual respiratory motion management in gated 3D thoracic MR imaging, reducing respiratory motion artifacts with insignificant acquisition time alteration. To test the hypothesis five healthy human subjects underwent two gated MR imaging studies based on a T2 weighted SPACE MR pulse sequence using a respiratory navigator of a 3T Siemens MRI: one under free breathing and the other under QBH biofeedback breathing. The QBH biofeedback system utilized the external marker position on the abdomen obtained with an RPM system (Real-time Position Management, Varian) to audio-visually guide a human subject for 2s breath-hold at 90% exhalation position in each respiratory cycle. The improvement in the upper liver breath-hold motion reproducibility within the gating window using the QBH biofeedback system has been assessed for a group of volunteers. We assessed the residual respiratory motion management within the gating window and respiratory motion artifacts in 3D thoracic MRI both with/without QBH biofeedback. In addition, the RMSE (root mean square error) of abdominal displacement has been investigated. The QBH biofeedback reduced the residual upper liver motion within the gating window during MR acquisitions (~6 minutes) compared to that for free breathing, resulting in the reduction of respiratory motion artifacts in lung and liver of gated 3D thoracic MR images. The abdominal motion reduction in the gated window was consistent with the residual motion reduction of the diaphragm with QBH biofeedback. Consequently, average RMSE (root mean square error) of abdominal displacement obtained from the RPM has been also reduced from 2.0 mm of free breathing to 0.7 mm of QBH biofeedback breathing over the entire cycle (67% reduction, p-value=0.02) and from 1.7 mm of free breathing to 0.7 mm of QBH biofeedback breathing in the gated window (58% reduction, p-value=0.14). The average baseline drift obtained using a linear fit was reduced from 5.5 mm/min with free breathing to 0.6 mm/min (89% reduction, p-value=0.017) with QBH biofeedback. The study demonstrated that the QBH biofeedback improved the upper liver breath-hold motion reproducibility during the gated 3D thoracic MR imaging. This system can provide clinically applicable motion management of the internal anatomy for gated medical imaging as well as gated radiotherapy.
김태호(Taeho Kim),김종현(Jonghyeon Kim),김성준(Sungjun Kim),김광호(Kwangho Kim),푸보(Bo Pu),나완수(Wansoo Nah) 한국전자파학회 2014 한국전자파학회논문지 Vol.25 No.5
본 논문에서는 4-포트 수평/수직 프로브 스테이션을 사용하여 수직 커넥터 핀의 특성 측정 시 사용되는 회로망 분석기의 교정용 키트(calibration kit)를 제안한다. 기존의 수평면에서 사용되는 교정키트를 사용하면, 교정 후 프로브 암의 변경 및 추가적인 장치가 필요하며, 이로 인한 시간 소요뿐 아니라, 주변 상황에 민감한 프로브 팁의 위치 변동에 기인한 정밀도 훼손의 위험이 있다. 본 논문에서는 이를 보완할 수 있는 4-포트 수평/수직 겸용 교정키트를 제시한다. 교정은 SOLT 방법을 이용하였으며, Short, Open, Load는 수평면에서 교정하며, Thru는 프로브의 위치에 따라서 교정기판의 같은 수평면에서 교정하거나 또는 교정기판의 위쪽, 아래쪽을 수직으로 연결하여 사용할 수 있도록 설계/제작하였다. 즉, 기판에 수직한 Thru를 교정할 때에는 교정키트를 수직으로 세워 키트 양면을 사용하여 교정할 수 있는 방법을 제안하였다. 제안한 교정키트에서의 SOLT 회로 반사/전달 특성을 기존 교정키트의 SOLT 회로의 반사/전달 특성과 비교 분석하였으며, 두 교정키트의 전달 특성은 길이 보정 후, 300 kHz부터 8.5 GHz까지 약 ±0.1 dB의 차이가 있음을 확인할 수 있었다. 이와 같이 설계/제작된 4-포트 수평/수직 교정키트의 유용성을 입증하기 위하여 각각 수평 측정의 경우와 수직 측정의 경우의 두 가지 경우 사례 연구를 수행하였으며, 그 결과를 기존의 교정키트를 사용한 후 측정된 결과 데이터와 비교 분석하였다. In this paper, we propose a horizontal/vertical calibration kit for calibrating a vector network analyzer(VNA) to measure the vertical connector pin. If the conventional calibration kit is used, we should change the arm for a probe or need an assistant device and it takes a long time. In addition there is a risk of precision degradation caused by the position change of the probe tip sensitive to the surroundings. We suggest a 4-port vertical calibration kit to make up for the aforementioned shortcomings. The calibration kit was manufactured for the SOLT calibration method. ‘Short’, ‘Open’, and ‘Load’ are available in the horizontal plane, ‘Thru’ is available not only in the horizontal plane on the two planes of a PCB, but in the vertical plane between the two planes according to the positions of the probes. We complemented the conventional calibration kit to make a vertical calibration kit to be used for the vertical measurement method. We compared and analysed their reflection/transfer characteristics of the SOLT calibration standards of the proposed calibration kit and conventional one, we get a ±0.1 dB differences of transfer characteristics in the range from 300 kHz to 8.5 GHz. In order to demonstrate usefulness, and we performed a case study for horizontal and vertical cases, and compared the results of the proposed calibration kit and conventional one.
개인사용자를 포함하는 JXTA 기반의 Service Oriented Architecture 구현
김태호(TaeHo Kim),이홍철(HongChul Lee),천현재(HongChul Lee),김준룡(JunRyong Kim) 한국컴퓨터정보학회 2007 韓國컴퓨터情報學會論文誌 Vol.12 No.4
본 논문에서는 상대적으로 B2B 환경만을 고려하고 있는 SOA 프레임워크를 대신하여 일반 사용자들에게도 원활한 서비스 제공을 가능하게 하는 SOA 프레임워크를 제시한다. 이를 위해 SOA의 개념과 특징, 구성요소에 대해 살펴본 후 이를 차세대 P2P 플랫폼으로 부각되고 있는 JXTA를 사용하여 구현한다. 제안된 프레임워크는 다른 SOA 프레임워크들의 기본적인 기능들을 포함하면서, 다른 프레임워크들에 비해 서비스 공급과 사용이 쉽고, 서비스가 데이터와 그 데이터를 제어할 수 있는 어플리케이션이 실행 가능한 형태로 공급되어 보안 문제를 해결 할 수 있으며, 각각의 peer들이 서비스 공급자, 서비스 사용자, 서비스 저장소의 역할을 동시에 수행할 수 있는 다양한 장점이 있다. This paper presents an SOA framework that enables smooth provision of service to ordinary users while also replacing the current B2B environment-oriented SOA framework. To that end, the proposed SOA will be reviewed for its concept, characteristics, and components. Key to its design is that it will be implemented using the prospective next-generation P2P platform known as JXTA. The proposed framework includes all the basic functions of other SOA frameworks, and will make provision and use of services more easy compared with other frameworks. Under this service, data and applications controlling these data are provided in an enabling format, thereby addressing security problems. Another advantage of this proposed framework is that each peer is able to play all roles of a service provider, service client, and service registry.
김태호(Taeho Kim),안중기(Junggi An) 대한지리학회 2008 대한지리학회지 Vol.43 No.4
한라산 북사면에 소재하는 구린굴의 천장이 함몰되고, 동굴 지상을 흐르던 병문천이 동굴 안으로 유입되면서 442m 길이의 구린굴 가운데 73m 구간이 하천 유로로 바뀌었다. 구린굴 유로의 폭과 높이는 각각 447㎝ 및 501㎝이며, 벽면은 용암선반이 발달한 전형적인 용암동굴의 모습을 보이나 바닥에는 기반암 하도 특유의 마식지형이 나타난다. 거북등 모양의 절리가 발달한 동굴 천장의 암반 두께는 30~60㎝에 불과하며, 이런 장소에서는 천장이 함몰하기 쉬워 유로 구간에는 전부 4개 지점에 윈도우가 발달한다. 구린굴 유로가 출현하기 이전의 지상 유로는 병문천의 지류로서 제4함몰 윈도우 지점을 지나 표고 653m 지점에서 구린굴 동쪽 유역으로부터 흘러나오는 본류에 합류하였다. 그러나 구린굴 지상 유로의 하상에 윈도우가 형성되면서 지상 유로는 구린굴 유로로 대체되고, 새로운 유로는 표고 660m 지점에서 본류에 합류하게 되었다. 이후 구린굴 상류 쪽으로 병문천 유역이 확대되면서 구린굴을 통과하는 유로가 본류로 바뀌었다. 그러나 홍수류가 발생하면 구린굴 지상 유로에도 유수가 발생하므로 병문천은 제4함몰 윈도우 지점에서 일시적으로 분기 하천의 형태를 이룬다. 제주도 용암동굴의 천장에서는 낙반 현상이 지속적으로 일어나고 있으므로 제주도의 수계발달에 미치는 용암동굴의 영향은 현재 진행형이라고 할 수 있다. Gurin Cave, 442 m long, is a lava tube developed on the northern slope of Mount Halla. Seventy-three meters of its lower reach became a river channel since Byeongmun River flowed into a window after roof collapse took place. The subterranean channel has a width of 447 ㎝ and a height of 501 ㎝, respectively. Its banks show welldeveloped lava shelves of a typical lava tube, while its floor has sculpted forms which characterize a bed of a bedrock stream. The reach is likely to be collapsed and then has four collapsed windows since its roof has the densely developed testudinal joints and consists of thin lavas with a thickness of 30 to 60 ㎝. Before the subterranean channel appeared, a ground channel flowed over the cave and joined into a main channel of Byeongmun River at 653 m in altitude. However, the subterranean channel substituted the ground channel since a bed of the ground channel collapsed into the cave. The new channel, flowing through the cave, joined into a main channel at 660 m in altitude. As the drainage area of Byeongmun River expanded upstream the cave, the new channel changed into a main channel. Since floodwater flows down the ground channel as well as the subterranean channel, a distributary stream has temporarily appeared at the collapsed window. Lava tubes are likely to have an affect on the development of river system in Jeju Island, in that the caves have constantly shown roof-fall.
다중 배경모델과 순시적 중앙값 배경모델을 이용한 불안정 상태 카메라로부터의 실시간 이동물체 검출
김태호(Taeho Kim),조강현(Kang-Hyun Jo) 제어로봇시스템학회 2010 제어·로봇·시스템학회 논문지 Vol.16 No.3
In this paper, we present the detection method of moving objects based on two background models. These background models support to understand multi layered environment belonged in images taken by shaking camera and each model is MBM(Multiple Background Model) and TMBM (Temporal Median Background Model). Because two background models are pixel-based model, it must have noise by camera movement. Therefore correlation coefficient calculates the similarity between consecutive images and measures camera motion vector which indicates camera movement. For the calculation of correlation coefficient, we choose the selected region and searching area in the current and previous image respectively then we have a displacement vector by the correlation process. Every selected region must have its own displacement vector therefore the global maximum of a histogram of displacement vectors is the camera motion vector between consecutive images. The MBM classifies the intensity distribution of each pixel continuously related by camera motion vector to the multi clusters. However, MBM has weak sensitivity for temporal intensity variation thus we use TMBM to support the weakness of system. In the video-based experiment, we verify the presented algorithm needs around 49(ms) to generate two background models and detect moving objects.