http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고분자 기판위에 다층 구조의 박막형 보호층을 적용한 투습률 향상
김종환,한진우,김영환,서대식,Kim Jong-Hwan,Han Jin-Woo,Kim Young-Hwan,Seo Dae-Shik 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.3
In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. In this investigation, the SiON and Polyimide(PI) layer showed the most suitable properties. Under these conditions, the WVTR(water vapour transition rate) for PET can be reduced from level of $0.57\;g/m^2{\cdot}day$ (bare subtrate) to $1{\times}10^{-5}\;g/m^2{\cdot}day$ after application of a SiON and Polyimide layer. These results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.
Geochemistry and Genesis of the Guryonsan(Ogcheon) Uraniferous Back Slate
김종환,Kim, Jong Hwan The Korean Society of Economic and Environmental G 1989 자원환경지질 Vol.22 No.1
구룡산(九龍山)(또는 옥천(沃川)) 함(含)우라늄 흑연질점판암(黑鉛質粘板岩)은 옥천대(沃川帶) 서북부(西北部)에 따라 증상(層狀) 또는 부딘상(狀)으로 90km이상(以上) 연장(延長) 분포(分布)한다. 함(含)우라늄점판암(粘板岩)의 오토레디오그라프에 나타나는 퇴적(堆積), 속성(續成), 변성구조(變成構造)는 우라늄과 동시퇴적물(同時堆積物)로서 속성작용과정(續成作用過程)에서 전혀 이동(移動)하지 않고 황성변성(廣域變成) 초기(初期)에 제자리에서 미립(微粒)우라니나이트로 재결정(再結晶)하였음을 보여준다. 동시(同時)에 유기물(有機物)은 미세환장흑연(微細環狀黑鉛)으로 되었다. 라미나구조(構造)의 발달(發達)과 평균(平均) 19.64% C, 2.32% S의 함유(含有)는 함(含)우라늄흑니(黑泥) 퇴적(堆積)의 일반조건(一般條件)으로서의 극(極)히 낮은 퇴적화(堆積比), 고유기물함유(高有機物含有), 염기성황경등을 충족(充足)하였으며 Th/U가 0.07로서 해수원(海水源)임을 뜻한다. 지역별(地域別) CaO, $P_2O_5$의 평균치(平均値)가 매우좁은 범위(範圍)의 일정치(一定値)이며 높은 CaO 평균치(平均値)를 나타내어 전퇴적(全堆積)분지를 통(通)하여 동일(同一) pH(7.8-8.0)조건(條件)의 환경(環境)에서 퇴적(堆積)하였음을 나타낸다. 함(含)우라늄점판암(粘板岩)은 같은 성인(成因)의 타산장(他産狀)에 비(比)하여 미량원소(微量元素) 부화도(富化度)가 매우 높다. 고부화(高富化)의 중요(重要)한 원인(原因)으로서 미량원소(微量元素)의 소스(source)인 해수(海水)의 주기적(週期的) 교체(交替)가 요구(要求)되는데 사이크릭퇴적구조(堆積構造)는 그러한 현상(現象)을 뒷받침하여 준다. 흑니(黑泥)의 성인별(成因別) 구성광물(構成鑛物)과 원소(元素)의 수반관계(隨伴關係)에서 쇄설성광물(鑛物)에는 Si, Al, K, Na, Ti, Zr, Th, Be, B, Li, 유기물(有機物)후락숀에, U, Ni, Cu, Co, Zn, Ag, Mo, Pb, Sn, Cd, S, Fe, V, Cr, Y, 탄산염광물(炭酸鹽鑛物)에 Ca, Mg, Mn, P, Ba가 높은 상관(相關)을 나타낸다. 유기물(有機物)의 우라늄고정심전능력(固定沈澱能力)에 있어 사프로페릭(Sapropelic)형(型)보다 휴믹(Humic)형(型)에서 더 높다. 육성식물(陸性植物)의 분해물(分解物)인 휴무스(Humus)는 고대성(古生代) 중기(中期)에 출현(出現)한다. 우라늄 함유(含有) 흑니(黑泥)는 이 시대(時代)의 형성물(形成物)로서 이런 형(型)의 광상(鑛床)은 생물상(生物相)의 진화(進化)에 규제(規制)된 광화작용(鑛化作用)의 산물(産物)이다. Geochemical characteristics of the Guryongsan (Ogcheon) uraniferous black slate show that this is an analogue to the conventional Chattanooga and Alum shales in occurrences. Whereas, its highest enrichment ratio in metals including uranium, among others, is explained by the cyclic sedimentation of the black muds and quartz-rich silts, and the uniform depositional condition with some what higher pH condition compared to the conditions of the known occurrences. The cyclic sedimentation, caused by the periodic open and close of the silled basin, has brought about the flush-out) of the uranium depleted water and the recharge with the new metal-rich sea water, which consequently contributed to the high concentration of metals in mud. The metal-rich marine black muds, which mostly occur in the early to middle Palaeozoic times, is attributed by the geologic conditions which related to the atmospheric oxygen contents, and these are scarcely met in the late Precambrian and/or with the onset of Palaeozoic era in the geologic evolution of the earth.
열전달 해석을 이용한 VAR 공정 변수가 티타늄 합금 잉고트 응고 조직에 미치는 영향 연구
김종환,이재현,허성강,현용택,이용태,Kim, Jong-Hwan,Lee, Jae-Hyeon,Heo, Seong-Gang,Hyeon, Yong-Taek,Lee, Yong-Tae 한국재료학회 2002 한국재료학회지 Vol.12 No.5
VAR process is required to control its various operating parameters. Heat transfer simulation has been accomplished to understand development of solidification micro and macro-structures during VAR process in Ti alloys. Optimum VAR process parameters could be also estimated in this study. It was found that macro-structures were closely related to the shape and depth of liquid pool, and solidification parameters, such as temperature gradient, heat flux, solid fraction. The cooling rates were higher at bottom, top, and center part respectively. As cooling rates increased, the $\alpha$ phase decreased in length, width and fraction. In order to evaluate which parameter affects the result of heat transfer calculation most sensitively, the sensitivities of input parameters to the simulation result were examined. The pool depth and cooling rate showed more sensitive to the temperature of the molten metal, heat transfer coefficient, and liquidus respectively. Also, these thermal properties became more sensitive at higher temperatures.
Direct Adaptive Control of Nonminimum Phase Systgems based on PID Structures
김종환,최계근,Kim, Jong-Hwan,Choi, Keh-Kun The Institute of Electronics and Information Engin 1986 전자공학회논문지 Vol.23 No.6
This paper presents direct adaptive controllers for single-input single-output nonminimum phase systems based on PID structures. Also, characteristics of these schemes are compared, and convergence properties are considered. In these schemes, controller parameters are estimated from the least-square algorithm and some additional auxiliary parameters are obtained from the proposed polynomial identity which is derived from the pole placement equation and the Bezout identity. The effectiveness of these schemes is demonstrated by computer simulation that has been carried out for a very difficult example.
부자의 메탄올 추출물에 의한 신세포암의 증식억제 및 세포사멸 유도
김종환,최영현,황원덕,Kim, Jong-Hwan,Choi, Yung-Hyun,Hwang, Won-Deuk 대한한방내과학회 2008 大韓韓方內科學會誌 Vol.29 No.1
Aconiti Tuber is a traditional medicinal plant generally used in Oriental medicine therapy. In this study, we investigated the biochemical mechanisms of anti-proliferative effects by the methanol extract of Aconiti tuber (MEBJ) in Caki-1 human renal cell carcinoma cells. It was found that MEBJ could inhibit, in a dose-dependent manner, cell growth which was associated with apoptotic cell death such as formation of apoptotic bodies, DNA fragmentation and increased populations of apoptotic-sub G1 phase. Apoptosis of Caki-1 cells by MEBJ was associated with an up-regulation of pro-apoptotic Bax expression, and a down-regulation of anti-apoptotic Bcl-2 in a dose-dependent manner; however, the levels of IAP family were not affected. MEBJ treatment also induced the proteolytic activation of caspase-3 and -8, and a inhibition of poly(ADP-ribose) polymerase (PARP) and $PLC{\gamma}1$ protein. Furthermore, MEBJ treatment caused a dose-dependent inhibition of iNOS and cyclooxygenase-2 (Cox-2). Though further studies will be needed to identify the active compounds that confer the anti-cancer activity of MEBJ, the present findings provide important new insights into the possible molecular mechanisms of the apoptotic activity of MEBJ in cancer cells.
김종환,백승원,윤병조,조성식,Kim, Jong-Hwan,Baik, Seungwon,Yoon, Byengjo,Jo, Sungsik 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.5
This paper presents a ballistic limit velocity measurement using the support vector machine that classifies two classes, the partial penetration and the complete penetration, by generating a linear separating hyperplane that equally divides the classes. For the ballistic limit velocity measurement, the previous methods(MIL-STD-662F and NIJ-STD-0101.06) have required a large number of experiments that caused high cost and time. However, the proposed method is not only flexible, requiring 0.85 ~ 4.8 times fewer experiments but also reliable, providing less than 2 % difference in results compared to the previous methods. For its validation, live fire experiments were conducted using various thickness SS400 iron plates as a target and two different types of live bullets such as 5.56 mm M193 and 7.62 mm M80.
CdTe QDs 용액 안정성의 장시간 유지지속을 위한 TGA(thioglycolic acid)의 첨가효과
김종환,김태희,구동건,기경범,최원규,한경석,류봉기,Kim, Jong-Hwan,Kim, Tae-Hee,Gwoo, Dong-Gun,Kee, Kyung-Bum,Choi, Won-Gyu,Han, Kung-Seok,Ryu, Bong-Ki 한국재료학회 2012 한국재료학회지 Vol.22 No.9
This paper focuses on the after synthesis of CdTe quantum dots(QDs) in aqueous solution. CdTe nanoparticles were prepared in aqueous solution using mercaptocarboxylic acid or thioglycolic acid(TGA) as stabilizing agents. QDs emit light smaller than the nano size. The contents of the mercaptocarboxylic acid, and a kind of raw material, were revealed for a period of time. We succeeded in synthesizing a very high quality QDs solution; we discussed how to make QDs better and to keep them stabilized. TGA is known as one of the best stabilizing agents. Many papers have mentioned that TGA is a good stabilizing agent. We dramatically confirmed the state of QDs after the experiments. The QDs solution can be influenced by several factors. Different content of TGA can influence the stability of the CdTe solution. Most papers deal with the synthesis of CdTe, so we decided to discuss the after synthesis process for the stability of the CdTe solution.
몬테칼로 시뮬레이션 기반의 다수 지상 연성표적에 대한 최적 조준점 산출
김종환,안남수,Kim, Jong-Hwan,Ahn, Nam-Su 한국시뮬레이션학회 2020 한국시뮬레이션학회 논문지 Vol.29 No.1
본 논문은 드론봇 전투체계를 운용하여 전투전단의 적 보병부대 위치정보를 수집하였을 시, 지휘관이 요구하는 적 부대 피해수준을 충족하면서 적 보병부대를 신속하고 정확하게 타격하기 위하여, 보유한 화력체계의 살상범위를 기초로 최적의 사격발수 및 조준점 위치를 실시간 자동으로 산출하는 인공지능 알고리즘 연구이다. 이를 위해, 100m×200m 크기의 야지 전장환경에서 증강된 소대급 규모의 적 보병부대를 임의로 전개 및 모의하고, 약 15m의 살상범위를 갖는 가상의 화력체계에 대한 모델링을 수행하였으며, 각개 적병사의 무피해/경상 및 중상/사망 등의 피해유형 및 임무수행 가능여부를 모의하기 위하여 연성표적의 피해효과에 적용되는 칼튼피해함수를 적용하고 전장의 불확실성을 모의하기 위하여 몬테칼로 시뮬레이션을 수행하였다. 또한, 지휘관 의도에 부합된 적부대의 피해수준을 달성하기 위하여, 반복적인 모의 및 비지도학습의 k-mean clustering 기법을 적용하여 최적의 사격발수 및 조준점 위치를 0.4초 이내로 산출하였다. 본 연구에서 제안하는 방법은 드론봇 전투체계를 운용하는 대대급 규모의 전투부대에서 '탐지-결심-타격' 의사결정시간의 단축에 기여할 것으로 판단된다. This paper presents a real-time autonomous computation of shot numbers and aiming points against multiple soft targets on grounds by applying an unsupervised learning, k-mean clustering and Monte carlo simulation. For this computation, a 100 × 200 square meters size of virtual battlefield is created where an augmented enemy infantry platoon unit attacks, defences, and is scatted, and a virtual weapon with a lethal range of 15m is modeled. In order to determine damage types of the enemy unit: no damage, light wound, heavy wound and death, Monte carlo simulation is performed to apply the Carlton damage function for the damage effect of the soft targets. In addition, in order to achieve the damage effectiveness of the enemy units in line with the commander's intention, the optimal shot numbers and aiming point locations are calculated in less than 0.4 seconds by applying the k-mean clustering and repetitive Monte carlo simulation. It is hoped that this study will help to develop a system that reduces the decision time for 'detection-decision-shoot' process in battalion-scaled combat units operating Dronebot combat system.
재귀적 베이시안 필터를 적용한 소화기탄의 충돌속도 추정 연구
김종환,조성식,Kim, Jong-Hwan,Jo, Seungsik 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.2
This paper presents a strike velocity estimation using the recursive Bayesian filter that operates both correction and prediction models to probabilistically remove noises of sensors and accurately estimate the strike velocity during the real-time experiments. Four different types of bullets such as 5.56 mm M193, 7.62 mm M80, 5.45 mm 7N10 and 7.62 mm MSC were used to validate the proposed method. Compared to the existing method, the proposed method statistically results in higher stability of the strike velocity estimation as well as its reliability for the ballistic limit velocity computation.
메타데이터 레지스트리 기반의 분산 정보 통합 시스템 설계 및 구현
김종환,박혜숙,문창주,백두권,Kim, Jong-Hwan,Park, Hea-Sook,Moon, Chang-Joo,Baik, Doo-Kwon 한국정보처리학회 2003 정보처리학회논문지D Vol.10 No.2
중개기 기반 정보 통합 시스템은 서로 다른 지역 정보 시스템의 유연한 통합을 지원하나, 질의 처리시 최적화 측면과 지역 스키마 정보에 관한 메타데이터 표준화 측면에는 그리 큰 비중을 두지 않았다. 이러한 점을 개선하기 위해 제안된 분산 정보 통합 시스템은 질의 처리시 최적화 측면을 위해 질의 캐싱을 사용하며, 지역 스키마 정보에 관한 메타데이터 표준화 측면을 위해 ISO/IEC 11179 기반의 메타데이터 레지스트리를 사용한다. 이 시스템은 분산된 이기종의 비즈니스 정보 시스템들을 논리적으로 통합하여 사용자가 필요로 하는 통합된 정보를 웹 기반으로 제공한다. 이러한 시스템을 시스템 재사용성의 향상과 유지보수의 용이함을 위해 계층적 패턴을 사용하여 3계층 표현 방식 아키텍처로 표현하였고, 3계층 아키텍처의 핵심 요소들의 기능성과 흐름을 효과적으로 표현하기 위하여 UML 방법론을 확장한 EPEM 방법론을 이용하여 설계하였다. 또한 제안한 시스템의 구체적인 한 예로서, 공급망 관리 도메인에 적용하여 웹 기반으로 구현하였다. 따라서 분산 정보 통합 시스템은 질의 처리 속도 향상을 위해 질의 함수 관리기와 질의 함수 저장소를 통하여 질의 캐싱 기능을 제공하였고, 의미 이질성 해결을 위해 ISO/IEC 11179 기반의 메타데이터 레지스트리와 스키마 레파지토리를 이용함으로써 스키마 이질성과 데이터 이질성을 해결하였다. The mediator-based system integrates heterogeneous information systems with the flexible manner. But it does not give much attention on the query optimization issues, especially for the query reusing. The other thing is that it does not use standardized metadata for schema matching. To improve this two issues, we propose mediator-based Distributed Information Integration System (DIIS) which uses query caching regarding performance and uses ISO/IEC 11179 metadata registry in terms of standardization. The DIIS is designed to provide decision-making support, which logically integrates the distributed heterogeneous business information systems based on the Web environment. We designed the system in the aspect of three-layer expression formula architecture using the layered pattern to improve the system reusability and to facilitate the system maintenance. The functionality and flow of core components of three-layer architecture are expressed in terms of process line diagrams and assembly line diagrams of Eriksson Penker Extension Model (EPEM), a methodology of an extension of UML. For the implementation, Supply Chain Management (SCM) domain is used. And we used the Web-based environment for user interface. The DIIS supports functions of query caching and query reusability through Query Function Manager (QFM) and Query Function Repository (QFR) such that it enhances the query processing speed and query reusability by caching the frequently used queries and optimizing the query cost. The DIIS solves the diverse heterogeneity problems by mapping MetaData Registry (MDR) based on ISO/IEC 11179 and Schema Repository (SCR).