http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박장한 ( Jang Han Park ),김태현 ( Tae Huyn Kim ),김준석 ( Jun Seok Kim ) 한국화학공학회 2016 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.54 No.4
새로운 수송용 에너지자원으로 각광받는 바이오매스의 효율적인 당화를 위한 전처리방법이 연구되고 있다. 최근 바이오매스의 에너지 전환 공정 중 전처리 비용이 높은 비중을 차지하고 있으며 이중 폐수처리가 커다란 문제점으로 지적되고 있다. 따라서 폐수발생을 줄이고 재사용이 용이한 유기용매(Organosolv)를 이용한 전처리를 수행하였으며, 전처리 바이오매스의 잔류 고형물의 양과 제거된 성분의 양을 이용하여 바이오매스의 전처리 효과를 효소당화를 통해 알아보았다. 전처리에 사용한 유기용매로는 99.5 wt% 에탄올을 사용하였고, 초본계 바이오매스인 옥수수대(corn stover)를 이용하여 전처리 하였다. 전처리 효과는 130~190℃ 조건에서 시간대별로 진행하여 전처리된 바이오매스의 효소당화를 통하여 확인하였다. 효소당화결과로 가장 높은 글루코오스 당화율을 보였던 전처리 온도는 190℃에서 반응시간70분 이상의 조건 이였으며, 이때 68% 이상의 당화율을 얻을 수 있었다. 또한 전처리 바이오매스의 잔류 고형물(Solidremaining)은 70% 이상이었고, 대부분의 셀룰로오스(Cellulose)와 헤미셀룰로오스(Hemicellulose)의 손실이 미비하여 대부분의 당 성분을 회수할 수 있다는 장점을 보였다. This study is for the effective pretreatment and saccharification of lignocellulosic biomass for a transport fuel receiving attention. The waste water during the pretreatment of biomass is major factor for determining the price of biofuel. Therefore, we conducted high concentration of organosolv pretreatment for decline waste water and reusing the solvent. We confirmed effect of organosolv pretreatment by components analysis and enzymatic hydrolysis of pretreated biomass. The corn stover was used for and 99.5 wt% of ethanol as a organosolv pretreatment. The pretreatment condition was varied 130 to 190℃ during the designated reaction times and the effect of pretreatment was investigated by enzymatic hydrolysis. The highest glucose conversion was more than 68% the pretreatment condition of 190℃ for 70 min or more. The solid remaining was more than 70% and almost of cellulose and hemicellulose were survived.
박장한 ( Jang Han Park ),김준석 ( Jun Seok Kim ) 한국화학공학회 2016 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.54 No.1
목질계 바이오매스를 이용하여 효소를 사용하지 않고 발효당을 얻기 위해 황산을 이용한 당화를 수행하였다. 바이 오매스로는 pinus rigida와 palm농업 부산물인 EFB를 사용하였다. 산을 이용한 당화에서는 당의 과분해 생성물을 줄이기 위한 당화조건을 생각해 보아야 한다. 따라서 본 연구에서는 목질계 바이오매스를 이용한 2단 산당화를 수행하였다. 산을 이용한 1차 가수분해에서는 72 wt%의 황산을 이용하여 80 oC에서 반응시켰을 경우 가장 높은 당화율을 보였고 pinus rigida와 EFB 각각 11.49 wt%, 32 wt%의 당화율을 보였다. 이후 1차 가수분해에서 얻은 액상을 9~15 wt%의 산농도가 되도록 묽혀 50~120 oC의 온도로 2차 가수분해를 진행했다. 2차 가수분해시 9%의 황산농도와 120 oC의 온도조건에서 80분간 반응시켰을 때 최종 글루코오스 당화율은 pinus rigida의 경우 86.8 wt.% (39 g/L), EFB의 경우95.3 wt%(32.4 g/L)를 얻을 수 있었다. 각 단계에서 분석된 결과는 물질수지를 통해 확인하고 당화 효율을 비교해 보았다. For obtain fermentable sugar, we conducted acid hydrolysis with lignocellulosic biomass without enzyme. The lignocellulosic biomass used pinus rigida and Palm residues (EFB; empty fruit bunches). In the acid hydrolysis, we consider the hydrolysis condition to reduce a denatured sugar. So this study was conducted 2-step acid hydrolysis. Firststep hydrolysis used high concentration (72 wt%) sulfuric acid at 80 oC. At the condition, we obtained 11.49 wt%, 32 wt% glucose conversion for pinus rigida and EFB. After the step, the liquor was dilute until 9~15 wt% acid concentration and conducted second hydrolysis at 50~120 oC. In the second hydrolysis, we obtained maximum glucose conversion (pinus rigida 86.8 wt% (39 g/L) and EFB 95.3 wt% (32.4 g/L)) at 9 wt% acid concentration and 120 oC for 80 min. All samples through the process are analyzed on the basis of mass balance.
박장석(Jang Suk Park),윤석환(Suk Han Yoon),박승규(Sung Kyu Park) 한국정보과학회 1984 정보과학회논문지 Vol.11 No.2
This paper is concerned with the horizontal microinstruction format design to emulate a functionally equivalent target machine. It describes the CPU model of host machine to emulate target machine and also proposes considerations in microinstruction format design. As a result, we designed the 76-bit horizontal micronistruction format satisfied with proposed considerations. 본 논문에서는 target machine을 기능적으로 동일하게 에믈레이션 하기 위한 호리전탈 마이크로 인스트럭션 포맷 설계를 기술하였다. Target machine 에믈레이션을 위한 Host machine의 CPU model 을 설명하였고, 이 CPU를 제어하기 위한 마이크로 인스트럭션 포맷을 설계할때 고려사항을 제시 하였으며, 제시된 고려사항을 만족하는 76 bits의 호리전탈 마이크로 인스트럭션 포맷을 설계하였다.
박장운(Jang Woon Park),김수진(Su Jin Kim),양윤정(Yoon Jung Yang),한아름(Ah Reum Han),김춘정(Choon Jung Kim),조길수(Gil Soo Cho),유희천(Hee Cheon You) 대한인간공학회 2010 大韓人間工學會誌 Vol.29 No.2
Research has been conducted to examine the effects of mechanical and sound characteristics of fabrics on affective quality. The present study developed the Affective Quality Evaluation and Estimation System for Textiles (AQEEST) with distinguished features that can be effectively used in the affective research of fabric frictional sound. The AQEEST consists of three subsystems (affective quality evaluation, affective quality estimation, and audible distance estimation subsystems) and each subsystem consists of three to four modules (e.g., evaluation condition setup, evaluation experimentation, and textile database management modules) depending on its functional requirements. The affective quality evaluation subsystem was designed to help administer an experiment in a systematic manner and present acoustic and visual stimuli simultaneously in various gait conditions (walking, jogging, and running) to mimic a more realistic situation of textile frictional sound production. Next, the affective quality estimation subsystem was designed to estimate the sound characteristics, affective qualities, overall psychological satisfaction, and reference cluster of a textile using its mechanical and/or sound characteristic information. Lastly, the audible distance estimation subsystem was designed to estimate the just noticeable sound pressure levels and audible distances of a textile for various gait conditions using its mechanical characteristic information. The AQEEST can be upgraded by accommodating more affective quality study results for various textiles.
C++ 코드로부터 클래스 관련 정보 생성 도구의 설계 및 구현
장덕철,박장한,Jang, Deok-Cheol,Park, Jang-Han 한국정보처리학회 2000 정보처리논문지 Vol.7 No.3
Automation tools for program analysis are needed in order to program understand and maintain, extract the characteristics of object-oriented program such as class name, member function and data member. In this paper, we carried out design and implementation of the automation tool for effective maintenance of object-oriented software. Being based on Reverse Engineering, this approach extracts class relationship information from C++ source code and generates object-oriented model of class diagram using UML as the standard object-oriented methodology. Therefore, this paper provides developers visualized including class information, definitions of classes, inheritance relationships, set relationships, and simple reference relationships. Finally in this paper, we propose a method that construct class relationship information to table in analysis state and make form of table construction to link form so tat developers can perform understanding and maintaining program efficiently. And this method enable to restructure and reuse in object-oriented model.