http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원전 제어 설비용 알루미늄 전해 커패시터의 일반규격품 품질검증 방안 연구
김형관(Hyoung-Gwan Kim),임국주(Gook-Ju Ihm),지영화(Yeong-Hwa Ji) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
일반규격품 품질검증(Commercial Grade Item Dedication)은 원자력발전소의 주요 계통에 사용되는 안전성 관련 기기나 부품을 일반규격품으로 대체하는 경우, 의도된 안전기능의 수행에 대한 합리적 보증을 취하는 과정이다. 본 논문에서는 원자력발전소 주요계통의 제어설비에 사용되는 일반 규격품 알루미늄 전해커패시터에 대한 품질검증 방법을 소개하고, 설계된 안전기능을 적절히 수행할 수 있음을 보증하기 위한 검증필수특성의 정의와 시험 및 검사에 대한 방법론을 기술한다. 원자력발전소에서 시행된 알루미늄 전해커패시터에 대한 일반규격품 품질검증의 과정과 결과를 제시하고, 특수시험 및 검사를 통해 확인된 부적합 사항을 토대로, 기존의 특수시험 및 검사방법에 대한 개선방향을 제안한다.
손종민,김형관,장주해,최문구,문찬웅,Sohn, Jong-Min,Kim, Hyoung-Gwan,Jahng, Ju-Hae,Choi, Moon-Ku,Moon, Chan-Woong 대한관절경학회 1998 대한관절경학회지 Vol.2 No.2
We reviewed the charts and photos taken during arthroscpy of 218 knees of 214 patients(240 menisci) retrospectively. The male was 156 cases(73%) and the female 58 cases(27%). The mean age of the patients was 35 years(range, 7-68). The patients who had definite trauma history were classified as trauma group(Group 1), and the patients who had no or could not recall trauma history were as atrauma group(Group 2). The trauma group was subclassified into the the patients with sports injury, traffic accident, fall down, slip down, direct injury, and miscellaneous according to the causes of the trauma. The patterns of meniscal tear were classified into longitudinal, bucket-handle, horizontal, transverse, flap, complex, and degenerative tear on the basis of O'Connor's classification. The aim of this study was to compare the meniscal tear patterns between trauma group(Group 1) and atrauma group(Group 2) and between the patients before and after the age of 40. The results were as follows ; 1) The difference in the incidence of tear between medial and lateral meniscus was not significant statistically. 2) In Group 1, 60% of the cases showed the longitudinal and bucket-handle tear and 52% of the cases of Group 2 were horizontal tear. 3) In the patients before the age of 40, the longitudinal and bucket-handle tear were 52% of the cases and in the patients over 40, tear patterns which were thought to be related to degenerative change, horizontal and degenerative tear were more than half of the cases (51%).
적외선 열화상 분석기술을 이용한 계측기 및 전자부품 최적 진단
지영화(Yeong-Hwa Ji),김형관(Hyoung-Gwan Kim),강현태(Hyun-Tae Kang) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
적외선 열화상 측정 및 분석은 과거 발전소를 비롯한 여러 산업분야의 각종 기기에 대해 효과적인 예측정비 및 진단 도구로 사용되어 왔다. 특히 회전기기, 밸브 등의 기계설비와 전동기, 변압기, 케이블 등의 전기설비의 열화상 측정 및 분석은 널리 적용되고 있다. 그러나 계측기 및 전자부품의 예측정비 및 고장진단을 위한 열화상 적용 및 진단기술에 대한 연구는 아직 미흡한 편이다. 계측기 및 전자부품의 열화, 접속불량 등에 의해 표준온도특성에서 벗어나는 이상 발열현상은 열화상 측정 및 분석을 통해 근본원인을 규명할 수 있어, 계측기 및 전자부품의 유용한 예측정비 및 고장진단 기술로 적용할 수 있다. 계측기 및 전자부품에 대해 열화상 측정 및 분석기법을 적용하여 실제 측정 및 분석에 적용한 결과, 예측정비 및 고장진단에 유용하게 활용될 수 있음을 확인하였고, 능동적 적용 및 이력관리를 통해 상태등급에 따른 기준을 수립하고 적용할 경우 설비의 신뢰도 및 안정성에 기여할 수 있다.
전자회로기판의 전원회로 발열 저감을 통한 고장 최소화 방안 연구
지영화(Yeong-Hwa Ji),김형관(Hyoung-Gwan Kim),정창규(Chang-Gyu Jung) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10
산업계에 제어 및 감시 목적으로 설치되어 있는 전자회로기판의 고장 중 전원회로의 고장빈도는 상대적으로 높으며, 대부분의 전원회로 고장은 설계 오류나 전자부품의 열화에 의해 발생된다. 특히, 표면장착기술(SMT; Surface mounted technology)을 적용한 소형의 전자회로기판은 선원회로부에서 발생된 발열량이 전자회로기관 전체에 높은 온도를 형성시켜 전자부품 열화에 의한 기능상실을 일으킨다. 따라서 본 연구에서는 전자회로기판 내 전원회로의 고장진단 방법을 제안하고 고장발생을 사전에 방지 또는 경감 할 수 있도록 전자회로기판의 전원회로 발열 서감을 용한 고장 최소화 방안을 세시하고자 한다.
원자력발전소 주요기기에 대한 감시 및 예측진단 기술 적용성 고찰
조성한(Sung-Han Jo),이재기(Jae-Ki-Lee),김형관(Hyoung-Gwan Kim) 제어로봇시스템학회 2011 제어·로봇·시스템학회 논문지 Vol.17 No.11
The major goal of nuclear power industries during past 10 years has been increasing reliability and utility capacity factor. But as capacity factors crept upward, it became harder and harder to attain next percentage of improvement. Therefore, other innovative technologies and method are required. The monitoring, diagnostic and prognostic technologies have been applied to the fossil power plants and contributed a lot on improving their reliability and performance. However nuclear industries are still reluctant to apply the technology by several reasons. In this paper, current preventive maintenance status of nuclear power plants and industrial practice of monitoring, diagnostic and prognostic technologies are investigated. In addition, the restriction in the implementation of the technologies to the nuclear power plants are defined. Finally, we suggest appropriate methods of implementing the technology to nuclear industries for improving current reliability and performance.