http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김대영,김백윤,윤재룡,Kim, Dae-Young,Kim, Baik-Yoon,Yoon, Jae-Rhyong 한국현미경학회 1998 Applied microscopy Vol.28 No.2
The development of the superior cervical ganglion was studied by electron microscopic method in human fetuses ranging from 40 mm to 260 mm of crown-rump length (10 to 30 weeks of gestational age). At 40 mm fetus, the superior cervical ganglion was composed of clusters of undifferentiated cell, primitive neuroblast, primitive supporting cell, and unmyelinated fibers. At 70mm fetus, the neuroblasts and their processes were ensheated by the bodies or processes of satellite cells. The cytoplasm of the neuroblast contained rough endoplasmic reticulum, mitochondria, Golgi complex, Nissl bodies and dense-cored vesicles. As the neuroblasts grew and differentiated dense-cored vesicles moved away from perikaryal cytoplasm into developing processes. Synaptic contacts between the cholinergic axon and dendrites of postganglionic neuron and a few axosomatic synapses were first observed at 70 mm fetus. At 90 mm fetus the superior cervical ganglion consisted of neuroblasts, satellite cells, granule-containing cells, and unmyelinated nerve fibers. The ganglion cells increased somewhat in numbers and size by 150 mm fetus. Further differentiation resulted in the formation of young ganglion cells, whose cytoplasm was densely filled with cell organelles. During next prenatal stage up to 260 mm fetus, the cytoplasm of the ganglion cells contained except for large pigment granules, all intracytoplasmic structures which were also found in mature superior cervical ganglion. A great number of synaptic contact zones between the cholinergic preganglionic axon and the dendrites of the postganglionic neuron were observed and a few axosomatic synapses were also observed. Two morphological types of the granule-containing cells in the superior cervical ganglion were first identified at 90 mm fetus. Type I granule-containing cell occurred in solitary, whereas type II tended to appeared in clusters near the blood capillaries. Synaptic contacts were first found on the solitary granule-containing cell at 150 mm fetus. Synaptic contacts between the soma of type I granule-containing cells and preganglionic axon termials were observed. In addition, synaptic junctions between the processes of the granule- containing cells and dendrites of postganglionic neuron were also observed from 150 mm fetus onward. In conclusion, superior cervical ganglion cells and granule-containing cells arise from a common undifferentiated cell precursor of neural crest . The granule-containg cells exhibit a local modulatory feedback system in the superior cervical ganglion and nay serve as interneurons between the preganglionic and postganglionic cells.
김대영,원영호,김성진,이승철,전인기 ( Dae Young Kim,Young Ho Won,Seong Jin Kim,Seung Chul Lee,Inn Ki Chun ) 대한피부과학회 1997 대한피부과학회지 Vol.35 No.4
Pyoderma gangrenosum is a rare neutrophilic dermatosis manifesting as painful pustules or bullae, which rapidly become necrotic to produce an ulceration. It is often associated with systemic disease, such as inflammatory bowel disease, rheumatoid arthritis, leukemia, but myelofibrosis is reported rarely for its underlying disease. The most common location is the lower extremities, and the pyoderma gangrenosum also occur infrequently on the hand and face. As in our case, bilateral involvement of the hands are rarely reported. We present a case of pyoderma gangrenosum that had developed on both hands in a 66 year old man who had macrocytic,anemia. A bone marrow biopsy revealed proliferation of fibroblasts and a dense reticulin network consistent with myelofibrosis, the association of which is very rare world wide. (Kor J Dermatol 1997;35(4): 809-813)
비부식성 플럭스를 이용한 알루미늄 브레이징용 필러 소재의 저온 성형용 금속 복합 분말 개발
김대영,장하늘,윤대호,신윤호,김성호,최현주,Kim, Dae-Young,Jang, Ha-Neul,Yoon, Dae-Ho,Shin, Yun-Ho,Kim, Seong-Ho,Choi, Hyun-Joo 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1
In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving non-corrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.
해수의 영향에 따른 이수식 TBM의 슬러리 관리를 위한 기초적 연구
김대영,이재원,정재훈,강한별,지성현,Kim, Dae-Young,Lee, Jae-won,Jung, Jae-Hoon,Kang, Han-Byul,Jee, Sung-Hyun 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.3
벤토나이트는 물과 접촉하면 팽창하고 점성을 발휘하는 성질이 있어 일반적으로 차수가 필요한 토목공사에 많이 활용되고 있다. 이수식 TBM에서는 이와 같은 성질을 활용하여 가압된 슬러리로 불투수성 막을 형성하고 굴착벽면의 붕괴를 방지하는 동시에 굴착된 버력을 운송하며 굴착을 수행한다. 하지만 벤토나이트는 해수와 접촉할 경우 팽창성이 저하되어 그 성질을 발휘하지 못하는 문제가 있다. 이는 해수 조건에서 이수식 TBM으로 터널을 굴착할 시 지하수 유입 증가로 인한 굴착 안정성 및 버력 배출에 문제를 초래할 수 있다. 본 연구에서는 이수식 TBM으로 터널을 굴착 시 해수의 유입으로 인한 슬러리의 상태변화를 살펴보고 이에 대응하기 위한 슬러리 관리방안을 제시 하였다. 이를 위해 현장에서 적용된 슬러리 품질관리 기준을 바탕으로 실내 시험을 수행하였으며, 해수의 영향이 있는 현장에 적용 할 수 있는 방안을 제시하였다. Bentonite swells when it comes into contact with water and makes it a viscous fluid. Thus it is widely used in civil engineering works for waterproofing. Utilizing the properties of bentonite, the slurry shield TBM supports excavated face with pressurized slurry as well as transporting excavated muck. When bentonite is in contact with seawater, due to the change of double layer thickness, its expandability and viscosity are lowered. This may cause problems for excavation stability and muck discharge due to the increase of sea water inflow when Slurry TBM is used under sea water conditions. In this study, the change of slurry condition caused by the inflow of sea water during tunnel excavation with Slurry TBM was investigated and a slurry management guideline was proposed. For this purpose, a laboratory test was carried out based on the slurry management criterions applied in the field, and a method applicable to the field where sea water is affected has been proposed.
토사지반 EPB TBM의 굴진성능 및 커팅툴 마모량에 관한 실험장비 개발 및 기초연구
김대영,강한별,신영진,정재훈,이재원,Kim, Dae-Young,Kang, Han-Byul,Shin, Young Jin,Jung, Jae-Hoon,Lee, Jae-won 한국터널지하공간학회 2018 한국터널지하공간학회논문집 Vol.20 No.2
The excavation performance and the cutting tool wear prediction of shield TBM are very important issues for design and construction in TBM tunneling. For hard-rock TBMs, CSM and NTNU model have been widely used for prediction of disc cutter wear and penetration rate. But in case of soft-ground TBMs, the wear evaluation and the excavation performance have not been studied in details due to the complexity of the ground behavior and therefore few testing methods have been proposed. In this study, a new soil abrasion and penetration tester (SAPT) that simulates EPB TBM excavation process is introduced which overcomes the drawbacks of the previously developed soil abrasivity testers. Parametric tests for penetration rate, foam mixing ratio, foam concentration were conducted to evaluate influential parameters affecting TBM excavation and also ripper wear was measured in laboratory. The results of artificial soil specimen composed of 70% illite and 30% silica sand showed TBM additives such as foam play a key role in terms of excavation and tool wear. 쉴드 TBM 공사에서 굴진율 예측과 마모량 예측은 설계 및 시공 단계에서 공사비와 공기를 추정하는데 매우 중요한 요소이다. 암반지반용 TBM의 경우 실험이나 축적된 현장 data를 기반으로 CSM 모델, NTNU 모델 등이 커터 마모량부터 굴진율 예측까지 널리 사용되고 있으나, 토사지반용 TBM은 지반의 복잡성과 정확한 실험방법의 부재로 인해 이를 정확하게 예측할 수 있는 모델이 없는 실정이다. 본 연구에서는 기존에 존재하는 토사지반용 TBM 실험장치들의 단점을 개선하여 TBM 굴착과정을 모사한 실험 장치(Soil Abrasivity Penetration Test, SAPT)를 개발하였다. 회전당 관입 깊이, RPM, 첨가재(foam) 배합비 및 농도 등의 TBM 굴진에 영향을 미치는 주요 변수들에 대한 시험을 실시하여 추력, 토크 등의 변화를 살펴보고 마모량을 측정하였다. 모래(규사) 70%와 점토(일라이트) 30%로 조성된 인공시료에 대한 실험 결과 foam 배합비가 굴진성능과 마모량에 주요한 영향을 끼치는 것으로 나타났다.
A Theoretical Study on Minimum-Bandwidth Line Coding
김대영,강창구,배철,오승협,Kim, Dae-Young,Kang, Chang-Goo,Bae, Cheol,Oh, Seung-Hyeub The Institute of Electronics and Information Engin 1990 전자공학회논문지 Vol.27 No.5
In this paper, some new results on minimum-bandwidth system are presented. First, we state sufficient condition for the existance of a existance of a power spectral null at the zero frequency and Nyquist frequency. Second, eye boundary functions and eyewidth are obtained for minimum-bandwidth systems of arbitrary numbers of transmitted symbol levels. Third, for linear minimum-bandwidth systems usually known as PR systems, we derived formulars for evaluating DSVs and ASVs in terms of the coefficients of the system polynomials and using formulars, we obtain DSVs and ASVs of various PR systems. Last, the relations among DSV, ASV, power spectral nulls, system polynomial nulls, and the minimum-bandwidth property are summarized.
주 조절점 핸들링이 편마비 환자의 한발서기 자세적응에 미치는 영향 - 보바스의 신경발달치료 중심 -
김대영,Kim, Dae-Young 대한물리치료과학회 2001 대한물리치료과학회지 Vol.8 No.2
This study is aimed at diagnosing transmutation aspect with the respective of hemiplegia patient's static adaptation of posture which is influenced by anti-gravity excercise, center of gravity shifting movement and segmental movement adaption of the legs and arms by key-point control in the process of Bobatli's treatment approach. The patients for the investigation of this study were selected as a total 17 patients who were doing the physical-therapy in Tae-gu Rehabilitation Center, and diagnosed as hemiplegia patients by Rehabilitation Medicine department in Kyung-buk University hospital. And also, there investigated into temporal transition that keep the attitude with one-leg standing on the ground concerning static attitude adaption on the basis of the before of anti-gravity movement and the after of 4-weeks movement. The findings of this study were as follows: With the respective the time to keep standing pose by one-leg at static attitude transmutation, affected side showed meaningful differences as a l.86/sec, 2.62/sec at 4 weeks later considering the before and after of this experiment.(p<0.01), non-affected side at the aspect of attitude keeping time, but there didn't showed meaningful differences statistically.
김대영,김원택,이화중,이강혁,Kim Dae Young,Kim Won Taek,Lee Hwa Jung,Lee Kang Hyeok 대한방사선치료학회 2003 大韓放射線治療技術學會誌 Vol.15 No.1
I. 목적 MLC의 단점인 조사영역경계의 요동현상이나, 반음영의 크기를 감소시킬 수 있는 HD270 MLC에 관한 소개와 유용성에 대해 평가하였다. II 대상 및 방법 HD-270 MLC는 PRIMUS(Siemens)의 치료테이블(ZXT) 과 다엽콜리메이터(3D MLC)를 leafs면에 수직방향으로 이동시킴으로써 유효반음영과 조사영역 경계의 요동을 감소시킨다. HD-270 MLC의 효율성과 적당한 resolution을 결정하기 위해 field edge angle(Y축과 이루는 각)이 0도에서 75도까지 15도의 간격으로 된 다각형의 field를 만들고 resolution은 5mm, 3mm, 2mm로 각각의 HD-270 group을 만들어 Siemens사 선형가속기(PRIMUS)의 6MV 광자선을 사용하여 solid phantom에서 SAD 100cm, depth 1.5cm으로 X-Omat film(Kodak)에 60MU로 조사하였다. 조사된 film은 Lumiscan75(LUMISYS)로 스캔해서 RIT113(Radiological Imaging Technology Inc. USA)으로 분석하여 유효반음영과 조사영역 경계의 요동의 변화를 측정하였다. 그리고 치료테이블 움직임의 정확성을 테스트하기 위해 테이블 위에 50Kg의 인체모형팬텀을 놓고 0.001inch의 정밀도를 가진 dial gauge로 가로, 세로, 수직의 세 직각방향으로 ${\pm}5mm,\;{\pm}4mm,\;{\pm}3mm,\;{\pm}2mm$단계별로 측정하였다 III. 결과 Resolution과 field edge angle이 증가할수록 유효반음영과 조사영역 경계의 요동현상은 증가하였다. 그리고 지멘스 ZXT 치료테이블움직임의 오차범위는 ${\pm}1mm$ 이내로 양호하였다. IV. 결론 최근 많이 사용되어지고 있는 다엽콜리메이터의 문제점들을 보완 할 수 있는 HD-270 MLC를 사용함으로써 MLC의 임상적용범위를 보다 넓힐 수 있을 것이다. I. Purpose The multileaf collimator(MLC) has many advantages, but use of the MLC increased effective penumbra and isodose undulation in dose distribution compared with that of an alloy block. In this work, we introduced the HD-270 MLC, which can improve the above disadvantages of MLC, and reported its feasibility study. II. Method and Materials The HD-270 MLC is a technique which combines the use of the existing Siemens multileaf collimator(3D MLC) with patient translation perpendicular to the leaf plane. The technique produces a smoothed isodose distribution with the reduced isodose undulation and effective penumbra. To assess the efficacy of the HD-270 technique and determine the appropriate resolution, a polygonal shaped MLC field was made to produce field edge angles from 0 degree to 75 degree with a step of 15 degree. Each HD-270 group was generated according to the allowed resolution, i. e., 5, 3, and 2mm. The experiment was carried out on Primus, a Siemens linear accelerator configured with HD-270 MLC. The total 60 MU of 6 MV photon beam was delivered to X-Omat film(Kodak, USA) at a SAD of 100 cm and 1.5 cm depth in solid water phantom. Exposed films were scanned by Lumiscan75(LUMISYS) and analyzed using RIT113 software(Radiological Imaging Technology Inc., USA). To test the mechanical accuracy of table movement, the transverse, longitudinal, and vertical positions were controlled by a consol with ${\pm}5\;mm,\;{\pm}4\;mm,\;{\pm}3\;mm,\;and\;{\pm}2\;mm$ steps, and then measured using a dial gauge with an accuracy of 0.001 inch. During the experiments, the table loaded with about 50Kg human phantom to simulate the real treatment situation. III. Results The effective penumbra and isodose undulation became larger with increase the resolution and field edge angle. The accuracy of the table movement on each direction is good within the ${\pm}1\;mm$. IV. Conclusion Clinical use of the MLC can be increased by using of the HD-270 MLC which complements to the disadvantages of the MLC.