http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한산${\cdot}$거제만 굴 양식장의 양식밀도에 관한 연구
조창환,CHO Chang Hwan 한국수산과학회 1980 한국수산과학회지 Vol.13 No.2
한산${\cdot}$거제만 굴 양식장에 관한 $1970\~1979$년까지 사이에 조사된 여러 가지 기존 자료와 1978년에 조사한 몇 가지 저질에 관한 조사자료를 토대로 한 굴양식장의 양식밀도에 관한 연구 결과는 다음과 같다. 1. 각 양성장에 있어 양성중인 굴밀도와 양성장 저이중에 함유되어 있는 COD, 페오파이틴의 양으로부터 구한 저이오염도간에는 상관이 있었다. 저이오염도 12를 한산${\cdot}$거제만의 한계치로 하여 평균 수심에 따른 단위면적당 굴 뭉치 수(C)와 저이오염도 (M)간의 회선직선식은 뗏목식의 경우 M=2.7341+1.8945C, 로우프식의 경우 M=6.4565+1.0988C에 적용하여 추정된 적정 양식밀도는 수하연수로 $m^2$당 뗏목식 0.12연, 로우프식 0.25연이었다. 2. $1970\~1978$년간의 양식결과에서 뗏목당 수하연수가 $350\~558$연 사이에서는 수하연수가 많을 수록 뗏목당 생산량은 많았고, 뗏목 1태가 점유한 수면적이 $1,000\~6,000m^2$까지는 태당 점유면적의 증가에 따라 생산량도 증가하였다. 뗏목당수하연수$(S_R)$와 뗏목당 생산량$(P_R)$ 관계식인 $P_R=-1.1272+0.009823S_R$와 뗏목 점유 면적$(D_R)$과 수하연당 생산량$(A_R)$의 관계식인 $A_R=4.7254+0.000604D_R$에 출하중심시기의 뗏목당 생산량 3.2t을 대입하여 구한 적정 양식밀도는 $m^2$당 약 0.11 연이다. 3. 단위면적당 수하연수(S)와 수하연당 생산량 (P/S)의 관계식인 $\frac{P}{S}=11.7213-44.2472S$에서 단위 면적당 수하연수가 많을수록 수하연당 생산량은 직선적으로 감소하였고, 이 식의 변형인 포물선식인 $P=11.7213\;S-44.2472S^2$에 의하면 수하연당 생산량은 $m^2$당 0.13연 수준에 달하기 까지는 증가하고 이 수준을 넘으면 오히려 감소한다. 이때 기대되는 최대 생산량은 약 5,600t으로 추정된다. 4. 양식밀도와 저이오염도, 뗏목당 수하연수와 뗏목당 점유면적에 따른 생산량 및 수하연 밀도와 연당 생산량의 3가지 측면에서 검토한 결과를 종합하건데, 한산${\cdot}$거제만 굴 양식장에 있어, 적정 양식밀도는 수하연수로 $m^2$당, 뗏목식에서 $0.11\~0.13$연, 로우프식에서 0.25연으로 추정된다. 5. 현재 한산${\cdot}$거제만의 굴 양식밀도는 수하연수로 $m^2$당, 뗏목식에서 0.24연, 로우프식에서 0.28연으로서 적정 양식밀도의 한계치를 초과하고 있다. Farming density of oyster cultured in Hansan-Geoje Bay was studied to obtain the optimal farming density based on the biosedimentation analysis and the annual yield data from 1970 to 1979. Farming density of oyster extrapolated by means of pollution grade of sediment is significantly correlated to COD and phaeophytin content of the bottom mud of the bay. Pollution grade is linearly related to the number of oyster clusters suspended in the unit area. Optimal farming density was $0.12\;string/m^2$ in case of raft culture, and it was $0.12\;string/m^2$ in case of long-line culture. Farming density was well expressed by the number of strings per raft and the area covered by a raft. As strings per raft increased from 350 to 558, total yield from a raft increased and when occupied sea area per raft ranged from $1.000\;m^2\;to\;6,000\;m^2$, the yield per raft linearly increased as the area increased. This analysis suggests that the optimal density be 0.11 string per unit area $(m^2)$. As increasing the number of strings per $m^2$ the yield per string decreases, and this is well dipicted by a linear function. At this time the yield per unit area increases when the number of string increases up to the density of $0.13\;strings/m^2$. From the point of these three comprehensive analyses the optimal density was $0.11\~0.13\;string/m^2$ in case of raft culture and $0.25\;strings/m^2$ in case of long-line culture in Hansan-Geoje Bay. The maximum expected yield of oyster in Hansan-Geoje Bay is approximately 5,600 tons when maintained the string density at $0.11\~0.13\;string/m^2$.
조창환(Chang-Hwan Cho),김중선(Jung-Seon Kim),김양모(Yang-Mo Kim) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.10
디지털기술의 발전으로 원자력발전소의 기기제어시스템은 Single-loop Control과 하드와이어드된 배선을 이용한 제어방식에서 Multi-loop Control과 통신망을 이용한 제어방식으로 변화되고 있다. 이에 따라 기기제어시스템의 단일고장발생시 플랜트 위험도가 증가하게 됨으로 플랜트 위험도 감소를 위한 연구가 필요하다. 위험도 감소를 위한 방안에는 기기제어시스템을 구성하는 기기의 신뢰도를 향상시키는 방법과 제어루프에 작동기기를 적절하게 배치하여 단일고장발생시 플랜트 위험도를 감소시키는 방법이 있다. 본 논문에서는 플랜트 위험도 감소 방안 중 작동기기 할당 방안에 대해 기술하였다.
폴리싱 및 포세린 타일 떠붙임용 시멘트계 친환경 타일접착제 개발
조창환 ( Cho Chang-hwan ),이덕용 ( Lee Duk-yong ),이재민 ( Lee Jae-min ),최일준 ( Choi Il-joon ),엄주일 ( Eom Joo-il ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.2
Currently, polymer-based tile cement (Thin-bed method) and epoxy adhesive (Thick-bed method) are mainly used as tile adhesive for polishing and porcelain. In the case of epoxy adhesive, there is a low economic efficiency, there is a problem that the work efficiency is reduced by mixing the resin and the hardener. In particular, the epoxy contains a bisphenol A and amine component, there is a risk of workable disease when a worker is exposed to odor and harmful gases generated in the epoxy adhesive for a long time. Against this background, it is necessary to analyze the hazards of using epoxy adhesives indoors, and develop cementitious high performance tile adhesive products with significantly lower hazards than epoxy adhesives.