플라즈마 표면처리에 의한 폴리카보네이트의 표면에너지 및 구리박막과의 접착력 변화에 관한 연구

조병훈,이원종,박영호,Cho Byeong-Hoon,Lee Won-Jong,Park Young-Ho 한국재료학회 2005 한국재료학회지 Vol.15 No.11

Polycarbonates are widely used as housing materials of electronic handsets. Since the polycarbonate is electrically insulating, there should be a conducting layer on the polycarbonate for EMI shielding. In this study, we sputter deposited Cu films on the polycarbonate substrates for EMI shielding. Plasma treatments of polycarbonates were used to increase the adhesion strength of the Cu film/polycarbonate interface. The surface energy of the polycarbonate was greatly increased from $30mJ/m^2 \;to\; 65mJ/m^2$ by a 200 W $O_2$ plasma treatment for 10s. It is thought that this is because of the ion bombardment. The adhesion strength of the sputter deposited Cu film to the polycarbonate was quantitatively measured by a 4 point bending tester. A moderate plasma surface treatment of the polycarbonate increased the Cu film/polycarbonate adhesion strength by $30\%$. The EMI shielding efficiency of the sputter deposited $10{\mu}m$ Cu lam on the polycarbonate showed 90dB in the range of 100MHz to 1000MHz.

도금된 Cemented Pin과 Amalgam의 접촉면에 관한 실험적 연구

조병훈(Cho, Byeong-Hoon),엄정문(Um Chung-Moon) 대한치과의사협회 1987 대한치과의사협회지 Vol.25 No.3

와동 형태와 충전 방법에 따른 Class V 복합 레진 수복치의 유한요소법적 응력 분석

손윤희,조병훈,엄정문,Son, Yoon-Hee,Cho, Byeong-Hoon,Um, Chung-Moon 대한치과보존학회 2000 Restorative Dentistry & Endodontics Vol.25 No.1

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

2급 와동 수복 시 한국 치과 지사들의 복합레진 사용 실태 연구

신동호,박세은,양인석,장주혜,이인복,조병훈,손호현,Shin, Dong-Ho,Park, Se-Eun,Yang, In-Seok,Chang, Ju-Hea,Lee, In-Bog,Cho, Byeong-Hoon,Son, Ho-Hyun 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.2

본 연구는 2008년 1월 현재 한국 치과의사들의 복합레진 사용 실태에 관한 설문 조사로서, 2급 와동을 수복하는 증례에서 치과의사의 면허 년도, 교육 배경 및 진료환경 등에 따라 수복재료의 선택, 복합레진의 사용여부 및 사용방법, 문제점 등을 비교하였다. 한국 치과의사들을 대상으로 2급 와동 수복에 관한 17 문항의 설문지를 제작하였다. 이 설문지는 시술자 정보, 2급 와동의 수복으로 크게 2부분으로 나누어진다. 이 설문지는 대한치과의사협회를 통해 12,193명의 치과의사들에게 E-메일로 발송되었다. 이 중 2,612개의 메일이 수신 확인되었고 840 개의 설문지가 작성되어 회신되었다 수신 확인된 메일 수에 대한 회신된 메일 수의 비율 (회신율)은 32.2%이었고, 이 자료는 SPSS 프로그램에서 카이제곱 분석을 이용하여 교차 분석하였다. 답변자의 비율은 면허년도를 기준으로 $1998{\sim}2007$년에 면허를 취득한 그룹 (한국 전체 치과의사의 33.3%, 추정년령 26-35세)이 60.3%로 1997년 이전에 면허 취득한 그룹 (한국 전체 치과의사의 66.7%, 추정 년령 36세 이상)의 39.7%보다 높은 것으로 나타났다. 또한 이들이 근무하는 병원은 개인의원 (77%)이 가장 많았고, 남자 치과의사 (79%)가 많았다. 복합레진 수복에 대한 지식은 학생 때 수업이나 학회 세미나를 통하여 (83.4%) 얻은 것으로 나타났다. 2급 와동 수복 시 재료 선호도를 살펴보면 금인레이가 65.7%를 차지하고 있고 복합레진 직접 수복은 12.1%로 낮게 나타났다. 2급 와동의 복합레진 직접 수복 시 시술 방법에 있어서는 러버댐을 사용하지 않거나 잘 사용하지 않는 그룹의 비율 (74.4%)이 더 많았고, 격벽법으로는 mylar strip (53.4%)이나 metal matrix (33.8%), Palodent system (6.5%)를 사용하였다. 충전은 적층법 (99.6%)을 사용하는 것으로 나타났으며, 시술 시 인접면 형성을 가장 어려워하였다(57.2%). 2-step 접착시스템 (76%)이 3-step 접착시스템 (16%)보다 많이 사용되고 있었다. 사용하는 레진 제품으로는 Z250 (20%)이 가장 많이 사용되고 있었다. The purpose of this study was to assess the current materials, methods and difficulties according to the year of licence and educational background of Korean dentists in Class II direct composite resin restorations. Total 17 questions were included in the questionnaire. Questions were broadly divided into two parts: first. operator's information. and second. the materials and methods used in Class II posterior composite restoration. The questionnaire was sent to dentists enrolled in Korean Dental Association via e-mail. Total 12,193 e-mails were distributed to dentists. 2,612 e-mails were opened, and 840 mails (32.2%) were received from respondents. The data was statically analyzed by chi-square test using SPSS(v. 12.0.1, SPSS Inc. Chicago, IL, USA). Male dentists among respondents was 79%. 60.3% of the respondents acquired their licences recently (1998-2007), and 77% practiced in private offices. 83.4% have acquired their knowledge through school lectures, conferences and seminars. For the Class II restorations, gold inlays were preferred by 65.7% of respondents, while direct composite resin restorations were used by 12.1 % amalgam users were only 4.4% of respondents. For the restorative technique, 74.4% of respondents didn't use rubber dam as needed. For the matrix. mylar strip (53.4%), metal matrix (33.8%) and Palodent system (6.5%) were used. 99.6% of respondents restored the Class II cavity by incremental layering. Obtaining of the tight interproximal contact was considered as the most difficult procedure (57.2%) followed by field isolation (21 %). Among various bonding systems, 22.6% of respondents preferred SE Bond and 20.2% used Single Bond. Z-250 was used most frequently among a variety of composite resins.

CAD/CAM 수복에 사용되는 리튬 다이실리케이트 세라믹의 물리/기계적 특성과 미세구조

강석호(Suk-Ho Kang),안진수(Jin-Soo Ahn),서덕규(Deog-Gyu Seo),조병훈(Byeong-Hoon Cho),손호현(Ho-Hyun Son) 대한치과재료학회 2014 대한치과재료학회지 Vol.41 No.1

Color difference between an experimental shade guide model based on the human teeth and a commercial shade guide

Bong-Joon Kim(김봉준),Bin Yu(유빈),Jin-Soo Ahn(안진수),Bum-Soon Lim(임범순),Byeong-Hoon Cho(조병훈),Yong-Keun Lee(이용근) 대한치과재료학회 2008 대한치과재료학회지 Vol.35 No.4

치아수복용 고분자 나노복합체의 물성

김오영 ( Oh Young Kim ),한상혁 ( Sang Hyuk Han ),서기택 ( Ki Taek Seo ),공명선 ( Myoung Seon Gong ),김창근 ( Chang Keun Kim ),임범순 ( Bum Soon Lim ),조병훈 ( Byeong Hoon Cho ) 한국공업화학회 2005 공업화학 Vol.16 No.3

합착용 복합레진시멘트로 합착한 Machinable Ceramic과 상아질 사이의 인장강도에 대한 실험적 연구

조병훈 大韓齒科保存學會 1998 Restorative Dentistry & Endodontics Vol.23 No.1

The purpose of this study is to observe the corrosion characteristcs of four dental amalgams(CAULK FINE CUT, CAULK SPHERICAL, DISPERSALLOY, TYTIN) and to determine a function of chloride concentration through the anodic polarization curve obtained by using a potentistat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylinderical metal mold, and condensed by hydrolic pressure. Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperatrue for 6 months. The anocid polarization curves were employed to compare the corrosion behaviours of the amalgam in KCI and KCI-NaCI solution, which had chloride concentration of 0.4 g/l, 0.8 g/l, 1.2 g/l, and 1.6 g/l at 37℃ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was 1500mV~+800mV(vs. S.C.E.) in the working electrode and the scan rate was 50mV/sec. The results were as follows. 1. The corrosion potential, the potential of anodic current peak, and transpassive potential in the solution of high chloride concentration shifted to more cathodic direction than those in thd solution of low concentration, and the current density in the solution of high chloride concentration was hifher than that in the solution of low concentration. 2. The corrosion potential, the potential of anodic current peak, and transpassive potential for CAULK FINE CUT amalgam were the most cathodic among the others, and the current density were the highest among the others. 3. In the solution of low chloride concentration, the corrosion potential, the potential of anodic current peak, and transpassive potential for DISPERSALLOY were the most anodic among the others, however in the solution of high chloride concentration, those for TYTIN were the most anodic among the others. 4. The anodic polarization curve for CAULK SPHERICAL was similar to that for high copper amalgams.

5급 복합레진충전된 치아에 있어서의 계면조건과 유지구의 영향에 대한 2차원유한요소법적 연구

김동호,유현미,조병훈 大韓齒科保存學會 1998 Restorative Dentistry & Endodontics Vol.23 No.2

CAD/CAM 으로 제작된 Ceramic Inlay의 변연누출에 관한 비교연구

조병훈,이명종,임미경,이광원,손호현 大韓齒科保存學會 1997 Restorative Dentistry & Endodontics Vol.22 No.2

To compare the marginal leakage of CAD/CAM-fabricated ceramic inlay, gold inlay and amalgam, forty extracted caries-free premolars were prepared with Class Ⅱ MO cavity design. The teeth were divided into four groups of ten samples each. Group 1 was restored with CAD/CAM-fabricated ceramic inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 2 was restored with gold inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 3 was restored with gold inlays cemented with zinc phosphate cement. And, Group 4 was restored with amalgam. All samples were thermocycled, and stored in 1% methylene blue. Marginal leakage was examined at four margins, that is, occlusal distal, priximal gingival, occlsal facial and occlusal lingual margins from sectioned samples under steeomicroscope(x15). The results were as follows: 1. Group 1 and 2 showed no statistically significant difference among marginal leakage at all four examined margins(p>0.05). 2. Group 3 and 4 showed significant marginal leakage at proximal gingival margin compared with other margins(p<0.05). 3. Significantly increased marginal leakage at priximal gingival, occlusal facial and occlusal lingual margins in group 3 were observed compared with other groups(p<0.05).