http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하악 구치부에 식립된 Br${\aa}$nemark 임프란트와 ITI 임프란트에서 임프란트간 치조정간골의 높이변화에 대한 방사선학적 비교
이상화,차인호,심준성,한동후,Yi, Sang-Hwa,Cha, In-Ho,Shim, June-Sung,Han, Dong-Hoo 대한치과보철학회 2004 대한치과보철학회지 Vol.42 No.4
Statement of problem: Br${\aa}$nemark or ITI are two currently most widely used implant systems but with contrasting design, surgical and restoration methods. Purpose: The purpose of this study was to compare changes and its statistical significance in bone height and shape which may rise due to the differences between two implant systems. Also to analyse the effect of inter-implant distance on annual bone height changes. Material & Method: Those patients who were treated with two or more of either Br${\aa}$nemark or ITI implants at posterior mandibular area at Yonsei University Dental Hospital, Implant Clinic were selected. At annual examination appointments, standardised radiographs using parallel technique were taken. Marginal bone and inter-implant crestal bone changes were measured and following results were obtained. Results: 1) When ITI and Br${\aa}$nemark system were compared, both annual marginal and inter-implant crestal bone height changes in ITI system in the first two years were smaller than Br${\aa}$nemark and they were statistically significant. On the third year, however, there was no statistical difference between two implant systems on their annual bone level changes (p>0.05). 2) The Marginal and inter-implant crestal bone changes were compared when inter-implant distance was less than 4mm. Statistically significant bone level changes were noted on the first year only for ITI implants but in the first and second year for Br${\aa}$nemark implants (p>0.05). 3) When comparing angulation changes between marginal bone and implant fixture, ITI system had smaller angulation changes but the annual changes were not statistically significant (p>0.05). Conclusion: Within the limitation of this study, it could be concluded that Br${\aa}$nemark implant systems had more changes in marginal and inter-implant crestal bone level in the first and second year after loading with statistical significance. Further studies are recommended to see the effects of these bone loss during the first and second year after loading on the long term prognosis of Br${\aa}$nemark Implants.
UHF 부분방전 센서 보정을 위한 표준 전자계 생성 장치
이상화(Sang-Hwa Yi),선종호(Jong-Ho Sun),김광화(Kwang-Hwa Kim),강동식(Dong-Sik Kang) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.5
대상 전력기기와 위치가 정해지지 않은 상태에서 UHF 부분방전 센서의 성능 측정시, 유효높이는 유용한 파라메터이며 이를 용이하게 측정하기 위해서 표준전계 발생장치가 필요하다. 표준전계를 발생을 위해 평행판 전송선로 형태의 TEM Line을 설계 제작하였으며, 제작된 TEM Line의 특성을 살펴보았고, 표준프로브법을 이용하여 TEM Line의 내부 전계를 보정하기 위한 실험을 실시하였다.
전력기기의 운전중 부분방전 진단장치에서 복합 잡음제거 적용을 위한 잡음평가 알고리즘
이상화(Sang-Hwa Yi),윤영우(Young-Woo Youn),추영배(Young-Bae Choo),강동식(Dong-Sik Kang) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.2
최근 경제적 시간적 이유로 전력기기의 운전 중 부분방전 감시진단 장치가 많이 이용되는 추세에 있으나, 시 공간적으로 다양한 종류의 잡음의 영향이 문제시 되고 있다. 이에 여러가지 잡음제거 기법들이 개발되었으나 범용적이지 않고 설정이나 환경에 따라 성능이 상이하다. 본 논문에서는 부분방전 측정신호의 잡음포함 정도를 수치적으로 제시할 수 있는 방법을 제시하였다. 이 기법이 적용되어 개발된 알고리즘을 이용하여, 다수 잡음제거 기법의 설정에 따른 다양한 결과 중 최선의 결과를 자동적으로 선택할 수 있었다. 운전 중 부분방전 감시진단 시스템에 사용되는 세 가지 잡음제거 기법에 적용하여 성공적으로 복합화 하였고 국내 다양한 잡음 환경의 고전압 기기들로부터 실측한 데이터에 능동적으로 적응한 잡음제거 결과를 도출할 수 있었다. This paper introduces an evaluation code, which can numerically express the noise possessing degree of signals. By using this code, the best kind and setting of noise suppressing techniques can be chosen automatically. This code is applied to three kinds of specific denoising techniques; those are simple noise removing method in the count versus phase distribution, fuzzy logic method based on noise type in magnitude versus phase plot, and lastly, the technique using grouping characteristics of PD pulses in 3D plot of magnitude versus phase versus cycle. The algorithm shows good performance in the various real PD signals measured from various high voltage apparatuses in Korea.
수치모의를 통한 원자력 발전소 심층 취·배수 구조물 유·출입구 주변에서의 수리학적 흐름특성 고찰
이상화(Lee Sang Hwa),이성면(Yi Sung Myeon),박병준(Park Byong Jun),이한승(Lee Han Seung) 대한토목학회 2012 대한토목학회논문집 A Vol.32 No.2A
증기를 발생시켜 터빈(turbine)을 회전시키는 화력 및 원자력 발전 계통에서 냉각시설은 필수적인 구조물이며, 냉각수 순환 계통은 일반적으로 해수를 취수하여 발전소 내의 복수기까지 유입시켜 증기와 열 교환 후 다시 외해로 배출시키는 형태를 취하고 있다. 최근 냉각수 취·배수 방식을 표층 취·배수방식이 아닌 심층 취·배수방식으로 변경하고 있는데, 기존 원전의 재순환 온도에 대한 영향을 최소화하고 온배구 방류시 밀도차로 인한 부력으로 온배수 혼합효과를 높여 온배수에 의한 환경피해 범위를 최소화하기 위해서이다. 특히, 하절기에 저층의 저온 냉각수를 취수할 수 있다는 이점 때문에 향후 계획되는 발전소들도 심층 취·배수 방식을 도입할 것으로 예상된다. 본 연구에서는 원자력 발전소의 냉각시설 중 심층 취·배수 구조물의 입구 주변을 3차원 전산유체역학 코드인 FLOW-3DⓇ로 모사하여 그 흐름특성을 분석하였다. 취수구(intake)의 경우 연직취수 조건에서 유속 덮개(Veloeity cap), 배수구(diffuser)의 경우 방류수의 분사방향에 변화를 주어 모의하였으며, 그 결고 취수구의 경우 유속덮개에 의한 연직 유속성분의 현저한 감소로 인한 어류 유입영향을 최소화 할 수 있을 것으로 판단되며, 배수구 희석효과는 Jirka 및 Harleman이 제시한 2차원 온배수 프롬(frume)과 잘 일치 하는 것으로 나타났다. A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pomp house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively and in take temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of FLOW-3DⓇ. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.
李相和(Sang-Hwa Yi),尹永祐(Young-Woo Youn),秋榮培(Young-Bae Choo),姜東植(Dong-Sik Kang) 대한전기학회 2009 전기학회논문지 Vol.58 No.2
This paper introduces a novel denoising algorithm for the partial-discharge(PD) signals from power apparatuses. The developed algorithm includes three kinds of specific denoising sub-algorithms. The first sub-algorithm uses the fuzzy logic which classifies the noise types in the magnitude versus phase PD pattern. This sub-algorithm is especially effective in the rejection of the noise with high and constant magnitude. The second one is the method simply removing the pulses in the phase sections below the threshold count in the count versus phase pattern. This method is effective in removing the occasional high level noise pulses. The last denoising sub-algorithm uses the grouping characteristics of PD pulses in the 3D plot of the magnitude versus phase versus cycle. This special technique can remove the periodical noise pulses with varying magnitudes, which are very difficult to be removed by other denoising methods. Each of the sub-algorithm has different characteristic and shows different quality of the noise rejection. On that account, a parameter which numerically expresses the noise possessing degree of signal, is defined and evaluated. Using the parameter and above three sub-algorithms, an adaptive complex noise rejection algorithm for the on-line PD diagnosis system is developed. Proposed algorithm shows good performances in the various real PD signals measured from the power apparatuses in the Korean plants.