http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
도로 상태 관리를 위한 정밀도로지도 기반의 도로노면지도 개발에 관한 연구
황진상(Hwang, Jin Sang),이지수(Lee, Ji Soo),이정혁(Lee, Jung Hyeok) 한국측량학회 2023 한국측량학회지 Vol.41 No.6
본 연구에서는 국토지리정보원이 전국을 대상으로 구축하고 있는 정밀도로지도를 활용하여 도로 상태 관리에 활용할 수 있는 도로노면지도를 개발하는 방법을 연구하였다. 도로 상태 관리를 위해 구축되었던 기존의 공간정보들과 달리 차선 및 일정 거리 단위의 연속된 폴리곤으로 도로의 상태를 매우 상세하게 저장할 수 있는 공간정보를 개발하였으며 시범구축을 통해 그 구현가능성과 활용성을 입증할 수 있었다. 연구수행 결과 도로 표면의 상태를 매우 상세하게 표현할 수 있는 도로노면지도의 구축이 가능함을 알 수 있었으며 도로의 상태와 관련된 다양한 데이터를 도로노면지도 형식으로 구축하여 도로의 유지관리와 안전운행 분야에 유용하게 활용할 수 있음을 제시할 수 있었다. In this study, a method of developing road surface map that can be used to manage road surface status was studied by using high definition map which was built across the country by National Geographic Information Institute. Unlike existing spatial information developed for road status management, the road surface map was developed to store the status of road surface in great detail with continuous polygons in lanes and certain distances. We could demonstrate the feasibility and utility through pilot construction. As a result of the study, it was found that it was possible to construct a road surface map that could express the state of the road in great detail, and it was suggested that various data related to the status of the road could be constructed in the form of a road surface map to be useful in the field of road maintenance and safe operation.
황진상(Hwang Jin Sang),윤홍식(Yun Hong Sic),강지훈(Kang Ji Hun) 대한토목학회 2009 대한토목학회논문집 D Vol.29 No.1D
본 논문은 지상기준점 좌표를 사용하지 않고 여러 대의 CCD 카메라와 GPS만을 이용하여 피사체의 크기를 측정할 수 있는 근접사진측량모델의 개발에 관한 것이다. 카메라 렌즈의 왜곡보정모델과 CCD 카메라의 사양으로 구성되는 내부표정 요소와 상호표정과 축척보정을 통한 모델좌표계상의 외부표정요소 계산으로 구성되는 사진측량모델을 개발하였다. 개발된 모델을 검증하기 위하여 피사체의 크기측정실험을 수행하였으며 측정 결과를 실측 결과와 비교하여 정확도를 평가하였다. 평가 결과 본 연구를 통하여 개발한 근접사진측량모델을 이용할 경우 높은 정확도의 피사체 크기 측정이 가능한 것으로 나타났다. This study is on the development of photogrammetric methode for measuring the size of object without control points. The model is composed of interior orientation parameters, which are consist of specifications of CCD camera and lens distortion parameters, and exterior orientation parameters, which are calculated through relative orientation and scale adjustment. We evaluated the accuracy of the model to find that it is possible to measure the size of object using the model.
정밀 근접사진측량을 위한 비 측량용 카메라의 효과적인 캘리브레이션 방법
황진상(Hwang, Jin Sang),윤홍식(Yun, Hong Sic),정태준(Jeong, Tae Jun),김창우(Kim, Chang Woo) 한국측량학회 2010 한국측량학회 학술대회자료집 Vol.2010 No.4
This study is on the effective methods for non metric camera calibration for its use in accurate close range photogrammetric surveying. We tested four estimation methods used for calculating interior orientation parameters and two methods for building calibration field, one is using targets which have three dimensional coordinates and the other is using two dimensional grid targets. By analysing test results effective and accurate calibration methods were suggested.
실시간 지역좌표계 조정 요소가 RTK GPS 측위의 정확도에 미치는 영향 분석
황진상(Hwang Jin Sang),박희주(Park Hee Ju),연상호(Yeon Sang Ho) 한국지적정보학회 2004 한국지적정보학회지 Vol.6 No.2
지역 좌표계상의 기준점 좌표를 기준으로 하고 RTK GPS 측위법을 사용하여 실시간 측량을 수행할 경우, WGS84 좌표계 상에서 수행되는 측위 결과를 사용하기 위하여 좌표변환 매개변수를 통한 실시간 지역좌표계 조정 작업이 개입되어야 한다. 본 연구는 이러한 실시간 지역좌표계 조정 공정에 사용되는 변환 매개변수의 정밀도가 측량 결과의 정확도에 미치는 영향을 분석하기 위하여 수행되었다. 상용 소프트웨어에 포함되어 국내에서 수행된 다수의 RTK GPS 측위 작업에 사용된 매개변수들을 연구 대상으로 하되, GPS 실측을 통하여 정확한 지역좌표계 좌표와 WGS84 좌표에 대한 정보를 가지고 있는 측점들을 사용하고, 미리 계산된 기선 벡터량을 사용하여 실시간 측위를 시뮬레이션 하였으며, 각각의 매개변수의 사용에 따른 오차의 개입 정도를 분석하였다. 연구 결과로써 사용되는 매개변수에 따라 기준국과 이동국 사이의 거리의 증가에 대한, 오차량의 증가 정도를 도식화 하였으며, 각 매개변수의 적정 적용 범위를 제시하였다. For determination of reference system with the control point coordinate on local coordinate system, and real time surveying by RTK GPS surveying, site calibration through coordinate transformation parameter should be intervened so as to use the surveying results conducted on WGS 84 coordinate system This study was conducted to analyze the influence on the accuracy of surveying results by transformation parameter which is used in these real time site calibration process. The study object was the parameter which are included in commercial software, and therefore used in many RTK GPS surveying conducted in Korea. But we used the control point which we have enough information on accurate local coordinate and WGS 84 coordinate through GPS surveying, and make a simulation of real time surveying with the baseline vector which are calculated conduct previously. As the results of study we deducted a graph on the increase degree of error vs distance increase between base and rover when the parameter changes, and proposed optimum application range of each parameter.
정밀도로공간정보 구축을 위한 지상 MMS 측정자료와 항공측량자료의 결합방법 연구
황진상(Hwang, Jin Sang),김재구(Kim, Jae Koo),윤홍식(Yun, Hong Sik),정운철(Jung, Woon Chul) 대한공간정보학회 2015 대한공간정보학회지 Vol.23 No.2
최근 스마트폰을 비롯한 각종 IT 장치의 도입과 차량항법시스템의 보편화로 인하여 위치기반 공간정보 서비스의 활용이 활발해 짐에 따라, 공간정보 사용자가 요구하는 품질의 수준이 높아지게 되었다. 본 연구에서는 지상 MMS 측정자료와 항공측량자료를 통합함으로써 정밀한 3차원 공간정보 구축하는 방법을 연구하였다. 이를 위해 실험지역에서 관측한 지상 MMS 측정자료와 항공측량자료 간의 편차경향을 분석하였고 각 데이터의 편차경향이 일관되지 못한걸 확인하였다. 편차 보정 모델 결정을 위해 GPS/INS 처리결과에 포함되어 있는 외부표정정보를 직접 수정하는 방법을 선택하였고 보정모델이 사용하는 기준인 보정용 기준점 좌표의 취득방법을 분류하여 각각의 장단점을 분석하였다. 항공사진 프로젝트에서 취득한 기준점 정보를 사용하여 지상 MMS 측정자료를 보정하는 방법을 통해 지상 MMS 측정자료 사이에 존재하는 편차를 소거하였을 뿐만 아니라 항공측량자료와 지상 MMS 측정자료 사이에 존재하던 편차도 대부분 소거된 것을 확인할 수 있었다. Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.
황진상(Hwang, Jin Sang),김재구(Kim, Jae Koo),윤홍식(Yun, Hong Sik) 대한공간정보학회 2015 대한공간정보학회지 Vol.23 No.2
현재 국내에서 제작되고 있는 2차원 지도는 제작 시점의 최신 정보만을 포함하고, 과거의 이력은 포함하지 않기 때문에 지형지물의 변화이력을 파악하기 어렵다. 본 연구에서는 시간의 경과에 따른 지형지물의 변화이력을 구축·관리할 수 있는 시계열 공간 데이터 모델을 개발하였으며 경기도 광교지구를 대상으로 시범 구축을 수행함으로써 개발된 모델의 적합성을 평가하였다. 또한 다년간 동일 지역을 대상으로 주기적으로 갱신된 지도를 이용한 시계열 지도 데이터베이스를 제작 절차를 정립함으로써 다년간 제작된 국가기본도를 이용한 전국 범위의 시계열 변화 지도 구현 방법을 제시하였다. Domestic 2D maps includes only most up-to-date information at the time of production without historical information. Therefore, it is hard to identify the change history of real world objects. In this research, Spatio-temporal model for 2D map were developed and it"s compatibility was verified through the pilot project conducted on the Gwanggyo area of Gyeonggi province. Also, the procedure to generate 2D spatio-temporal database using maps made periodically on the same target area was introduced for showing the possibility of realizing nation wide spatio-temporal 2D map using the national base map updated periodically.