http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 홍태기 ( Tae-gi Hong ) (검색결과 5 건)
- 무료
- 기관 내 무료
- 유료
-
권종광,홍태기,Gwon, Jong-Gwang,Hong, Tae-Gi 한국방위산업진흥회 2002 國防과 技術 Vol.- No.278
항공기의 야간임무 수행 능력을 최대화하고 조종사에게 심리적 안정감을 주어 전투력 향상을 극대화 할 수 있는 야시조명에 관한 지상시험평가 방법에 대하여 서술하였다. 야시조명 지상시험 평가는 설계된대로 야시조명원들이 정상 작동하는지를 평가하는 기능시험과 야간투시경의 원활한 작동을 위한 조명원들의 간섭현상을 평가하는 호환성시험으로 나눌 수 있다.
-
한원식,홍태기,박기정,임성진,위광철,Han, Won-Sik,Hong, Tae-Kee,Park, Gi-Jung,Lim, Sung-Jin,Wi, Koang-Chul 한국문화재보존과학회 2008 보존과학회지 Vol.24 No.-
유구 이전의 안정성은 고분자 재료의 물리적 우수성뿐만 아니라 작업성과도 밀접한 관계가 있다. 이들 유구 이전 재료들은 토양에 함유된 수분 함량이나 낮은 온도와 같은 주위 환경의 영향이 없이 작업이 가능해야 하며, Epoxy최종 생성물로부터 Urethane 1차 생성물을 박리시키는 작업 공정 중의 안정성과 작업성도 요구된다. 그래서 본 논문에서는 우수한 물리적 특성을 갖는 저점도의 Epoxy polymer와 경화제 및 유구 이전을 위한 박리제에 대한 합성에 대하여 보고하고자 한다. 이 유구 이전 전용 저점도 Epoxy는 우수한 접착 강도와 자체 강도, 작업성 등의 물리적 안정성을 유지하고 있으며 특히, 박리제는 우레탄과 저점도의 Epoxy 간의 우수한 박리 안정성을 나타내고 있다. Stability of the moving historic sites have something to do with the degree of easiness of work as well as physical property of polymer product. These agents should be able to use without the effect of outer environments like water or low temperature and must have stability during progress of working the peel off Urethane pre-product from Epoxy surface. So, we synthesized low viscosity epoxy resin and hardener with best physical quality and separation media for the moving of historical sites. These products have very good tension strength, adhesion strength, low viscosity and various physical properties that the users want. Particularly, separation media products have good separation of Urethane pre-products surface and Epoxy final product surface.
-
홍순기 ( Soon-gi Hong ),변혜진 ( Hye-jin Byeoun ),유윤정 ( Yoon-jung You ),이석기 ( Seok-ki Lee ),홍태기 ( Tae-kee Hong ) 한국환경분석학회 2018 환경분석과 독성보건 Vol.21 No.2
This study was performed to analyze the monthly characteristics of sewage sludge by analyzing the basic data required for recycling in thermal power generation or as incineration plant auxiliary fuel. Analytical samples were collected from two sites every month for three years, for 72 samples total. Proximate analysis (such as moisture, ash, and volatiles), elemental analysis (C, H, O, N, and S), tube furnace-ion chromatography, and calorimetry (heating value) were performed to evaluate the sludge heating characteristics. Resultantly, the moisture values were 73.2-89.5% (average 82%), the volatile values (dry basis) 44.8-83.0% (average 66.5%), and the low heating values (10% moisture basis) 2,014-4,304 kcal/kg (average 3,248 kcal/kg). The low heating values (10% moisture basis) exceeded the recycling standard of 2,000 kcal/kg, confirming the possibility of recycling the sludge as fuel. When we looked at the monthly heating value of the sewage sludge, it tended to be high in November, December, January, and February. Thus it could be concluded that sewage-sludge-based fuels generated in winter could obtain higher quality with higher heating value when sewage sludge is recycled as fuel.
-
세치제에 함유된 비효소계 항산화제의 경시변화에 따른 잔류량
박정은 ( Jung-eun Park ),박용덕 ( Yong-duk Park ),홍태기 ( Tae-gi Hong ),장종화 ( Jong-hwa Jang ) 한국치위생학회(구 한국치위생교육학회) 2016 한국치위생학회지 Vol.16 No.5
Objectives: The purpose of this study is to evaluate the non-enzymatic antioxidants stabilities in dentifrices by ascorbic acid and tocopherol according to the chemical condition. Methods: For the analysis of two antioxidants, HPLC UV detector system was used. HPLC was performed using sodium sulfate, acetonitrile(ACN), methanol(MeOH) and measuring absorbance at 240-295 nm. To confirm general pH reaction of two compounds, buffer solution was prepared for the analysis. The dentifrice was titrated by pH so as to examine the change of elapsed time in dentifrice. Linearity of calibration curve of two antioxidants was measured. Results: Each compound showed good linearity at optimized wavelength as well as showing good precision. General pH reaction of two antioxidants was examined. Ascorbic acid showed the highest residue(63.23%) at pH 10 and the lowest residue(2.77%) at pH 4. Tocopherol showed the highest residue(55.70%) at pH 7 and the lowest residue(3.31%) at pH 4. As a result of changing elapsed time of antioxidants in dentifrice by pH, components were remained stably at low temperature(39.2℉) and pH 7. Conclusions: It is necessary to keep dentifrice including ascorbic acid and tocopherol, and non-enzymatic antioxidants at pH 7 and low temperature for improving chemical stability.
-
액체 전해질형 리튬 설퍼전지의 양극 바인더로 PTFE의 특성 조사
김남인 ( Kim Nam In ),서재만 ( Seo Jae Man ),이채봉 ( Lee Chae Bong ),이원재 ( Lee Won Jae ),홍태기 ( Hong Tae Gi ) 한국공업화학회 2003 공업화학 Vol.14 No.8
바인더로 carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA), 그리고 polytetrafluoroethylene (PTFE)을 혼합한 형태와 polyethylene oxide (PEO) 만을 사용한 양극을 제조하였다. 제조된 양극에 대해 morphology와 전기화학적 특성 및 전지성능을 조사하여 바인더의 영향을 고찰하였다. 혼합된 바인더에 따라 양극내의 세공분포 양상은 변하고 이는 전지의 성능에 영향을 미쳤다. 양극에서 PTFE 함량이 높을수록 비표면적은 증가하였고 계면 저항은 감소하여 전지의 출력성능을 향상시키는 효과가 있었다. PTFE (15 wt%)를 혼합한 양극에서 가장 우수한 방전 특성을 보였고 이 때 비표면적과 설퍼 이용률은 각각 16 m²/g과 70% 이상이었다. The cathodes with various binders such as carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA), polytetrafluoroethylene (PTFE), and polyethylene oxide (PEO), in different combinations including sole component in the case of PEO, were prepared. These cathodes were examined by morphology measurement, electrochemical characteristics, and discharge performance to inspect the effect of binder on Li-S battery. The morphology of cathode varies with various binder combination and the performance of battery is greatly affected by the morphology. The specific surface area (SSA) of cathode composite material increases and the interface resistance reduces with increasing content of PTFE introduced into the cathode. The battery with cathode including F`TFE (15 wt%) showed the distinguished power enhancement, compared with those composed of other binder combinations. The cathode with predominant results was able to increase SSA and sulfur utilization by 16m^(2)/g and more than 70%, respectively.
eArticle연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
