http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원자층 증착법 공정 온도에 따른 연료전지용 백금 촉매 특성 최적화 연구
이우재 ( Woo-jae Lee ),홍웅표 ( Woong-pyo Hong ),권세훈 ( Se-hunkwon ) 한국화상학회 2023 한국화상학회지 Vol.29 No.2
본 연구에서는 공정 간소화, 균일한 나노 입자 형성, 백금 저감 및 활용도를 높이기 위하여 원자층 증착법 (Atomic Layer Deposition, ALD)을 통하여 양이온 교환막 연료전지용 촉매를 제조하고 증착 온도에 따른 백금 입자 형성 거동을 확인하였다. 증착 온도는 250 ℃, 300 ℃, 350 ℃로 조절하여 백금 촉매를 형성하였으며 각 각의 촉매의 증착 양상을 확인하기 위하여 Thermogravimetric analysis, X-ray diffraction 및 Transmission electron microscopy를 도입하여 담지량, 백금 입자 분포, 크기 및 결정구조 등을 확인하였다. 합성된 백금 촉매를 연료전지에 적용하기 위해서 Cyclic Voltammetry 기법을 통해서 전기화학적 활성 표면적를 구하고, Membrane Electrode Assembly 셀을 제작하여 전지특성을 확보하였다. 최종적으로, 백금 촉매 제조 시 ALD 증착 온도는 300 ℃ 이하에서 합성해야 됨을 밝혀냈으며, ALD으로 제작된 백금 촉매가 기존 습식 촉매보다 더 우수한 특성을 보임을 확인하였다. 해당 연구는 ALD을 통하여 다양한 접근법으로 촉매를 제조할 시, 기본적인 ALD 공정 정보 및 ALD 촉매 합성 방향성을 제공할 수 있다. In this study, platinum (Pt) catalysts for proton exchange membrane fuel cells were manufactured using atomic layer deposition (ALD) to simplify the synthesis process, achieve the formation of uniform nanoparticle, and reduce and enhance the utilization of precious metals. The deposition behavior of Pt nanoparticles was investigated depending on the ALD deposition temperatures. Pt catalysts were synthesized by ALD at 250 ℃, 300 ℃, and 350 ℃, and thermogravimetric analysis, X-ray diffraction, and transmission electron microscopy were employed to investigate the deposition characteristics, Pt nanoparticle distribution, size, and crystal structure of each catalyst. To apply them in fuel cells, the electro-chemical active surface area was determined using cyclic voltammetry, and membrane electrode assembly cells were fabricated to study fuel cell performance. Ultimately, it was revealed that the ALD synthesis of Pt catalyst should be conducted at deposition temperatures below 300 ℃, and these Pt catalysts exhibited superior characteristics compared to wet-based Pt catalysts. This study provides fundamental information and direction on the ALD process for synthesizing catalysts when the advanced Pt based catalyst is synthesized by ALD through various approaches.
공성민 ( Sung Min Kong ),김광민 ( Kwang Min Kim ),이재진 ( Jae Jin Lee ),홍웅표 ( Woong Pyo Hong ),최익성 ( Ik Sung Choi ),정계화 ( Kye Hwa Jeong ),권병수 ( Byung Soo Kwan ),이동규 ( Dong Gyu Lee ) 대한췌담도학회 2016 대한췌담도학회지 Vol.21 No.3
간내 육종양 담관암은 간내 담관암의 비교적 드문 변이형으로 간내 증식 및 전이 혈관 침범 등이 흔해 예후가 불량하다고 알려져 있다. 따라서 완치를 위해서는 조기진단과 적극적인 치료가 무엇보다 중요하다. 본 저자들은 영상학적 검사와 간생검을 하였지만 임상 진단이 불충분하였던 간 병변을 수술 후 병리조직검사를 통해 간내 육종양 담관암으로 확진한 증례를 경험하였기에 보고한다. 기존에 보고되었던 증례들과 달리, 초기 병기로 확인되어 비교적 좋은 예후가 기대되는 바이다. Sarcomatoid transformation of intrahepatic cholangiocarcinoma is rarely found but usually has very poor prognosis due to the lack of effective approaches for early detection and its aggressive nature. We report a case of this tumor type, in a 60-year-old man who was referred to our hospital for further evaluation of screeningdetected, asymptomatic hepatic lesion. Clinical diagnosis was elusive despite performance of different imaging modalities and a transcutaneous liver biopsy. Pathology of the surgically resected tumor demonstrated intrahepatic sarcomatoid cholangiocarcinoma. In our case, tumor cells expressed strong immunoreactivity to both cytokeratin-19 and vimentin. We assume the relatively good prognosis of this patient would be expected because surgery played a critical role at an early stage of the tumor. Korean J Pancreas Biliary Tract 2016;21(3):174-179
금속-유기 프리커서를 통한 연료전지 분리판 성능/내구 향상 소재 연구
최광훈(Choi Kwang Hoon),김보경(Kim Bo Kyung),여인웅(Lyo In Woong),홍웅표(Hong Woong Pyo),서지연(Seo Ji Youn) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
Diamond-like nanocomposite coatings comprising metal-organic precursor and carbon material were explored by plasma enhanced chemical vapor deposition with various CF4 flow rates. As the flow rate of CF4 increase, surface energies and corrosion properties of the resulting coating were enhanced, indicating CF bonding between carbon and fluorine were generated during PECVD reactions. High conductivity of the resulting coating is a reasonably possible candidate for separator plates