http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MLRA에 의한 초경합금재의 연삭저항 실험식 지수값에 관한 연구
김원일,왕덕현,허성중 慶南大學校 附設 工業技術硏究所 1994 硏究論文集 Vol.12 No.-
본 논문은 범용 평면연삭기를 가지고 초경합금재를 가공할 때 소정의 정밀도를 유지하면서 가공 능률향상을 위한 실험적인 최적 조건을 연삭저항 결과치를 중점적으로 연삭비등의 변화를 통해 규명하고, 연삭저항의 기구 및 다양한 실험 결과에 대해 컴퓨터를 이용한 중선형회귀분석(MLRA: Multiple Linear Regression Analysis)으로 연삭저항의 실험식에 관한 지수값을 결정하고, 실험의 결과와 비교하여 그 타당성을 규명하여 향후, 고경질 난삭재의 연삭에 있어서 지식 전문가 시스템 (Knowledge based expert system)을 구축하기 위한 기본적 지식베이스(Knowledge base)등에 활용될 수 있도록 하고자 하였다. This paper described the surface grinding condition of WC-Co using diamond abrasive grinding wheel in order to increase the grinding efficiency. Computer program of MLRA(Multiple Linear Regression Analysis) was used to decide exponent values of experimental formula of grinding resistance. These results were compared with the experimental ones. Analytical results by MLRA were found to agree with the experimental ones. Accordingly, these results will be used knowledge base to construct knowledge based expert system on surface grinding of high strength engineering materials.
다이아몬드휠을 사용한 WC-Co재의 고능률적 평면 연삭 가공에 관한 연구
김원일,허성중,강재훈,이재경 慶南大學校 附設 工業技術硏究所 1992 硏究論文集 Vol.10 No.-
WC-Co재는 금형 제작용으로 근래 그 사용이 급증하고 있다. 본 논문은 WC-Co재의 고능률 최적 연삭조건을 정립하기 위하여 연삭저항과 연삭비를 중심으로 실험적 연구를 행한 결과 다음과 같은 결론을 얻을 수 있었다. 1)WC-Co재의 가공에 대한 연삭저항은 연삭 깊이가 증가하고 다이야 몬드 연삭 숫돌의 주속도가 느릴수록, 공작물 연삭 속도가 감소할 수록 증가하였다. 2)WC-Co재의 경우, 연삭비는 테이블 이송 속도등의 증가와 더불어 감소함을 나타내었다. Recently, the making of WC-Co materials which are used for metallic mould is growing very rapidly. This investigation examines the grinding force and grinding ratio caused by experimental machining of WC-Co for research high efficiently optimal grinding condition. From the result of experiments obtained hear are summarized as follows and so forth. 1) For working WC-Co materials, the grinding force increases according to increase of depth of cut, decrease of surface velocity of diamond abrasive wheel and increase of surface velocity of work. 2) In case of WC-Co materials, grinding ratio is decrease according to increase of table feed rate et, al.
고품위 연삭 가공기법을 이용한 알루미나 세라믹스 부품의 강도향상에 관한 연구
김원일,강재훈,이재경,허성중 경남대학교 신소재연구소 1992 論文集 Vol.2 No.-
초지립 연삭 공구인 다이아몬드 휠을 사용하여 엔지니어링 세라믹스를 제거가공함에 있어 공구의 마멸 및 가공면 상의 가공 결함 등에 의한 강도 저하 현상 등이 야기되어지고 있다. 한편, 최적 절인 형성을 위한 가공 공정상의 빈번한 재드레싱 시간 등의 소요는 생산성 향상의 측면에 있어 장애가 되고 있다. 연삭 가공중의 연속 드레싱 기구를 고려해 봄으로써 계속적인 다이아몬드 지립의 양호한 절인 상태를 유지하며 고능률적으로 제거 가공을 추진하고, 절인 마멸에 의한 가공 결함 들을 극소화시키는 효과를 얻고자 실험적으로 본 연구를 수행하였다. 굽힘 강도 시편을 가공 제작하여 기계적 특성치의 변화를 구해봄으로써 이에 대한 재고찰을 해보았으며, 고품위 연삭 기법에 의한 우수한 결과치들을 얻을 수 있었다. Engineering ceramics have some excellent properies as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper experiments are carried out to obtain the effect of In-process dressing to grind the engineering ceramies with high efficency. To save running time for dressing process and obtain restraint effect of diamond grain wear, In-process dressing system using WA stick type honing stone is proposed. Representative engineering ceramics, A1₂O₃, are ground with diamond wheel. Also bending strength test is carried out to check upward tendency of mecahnical properties as the result of machining defact restraint through the grinding machining method using "In- process dressing" process. Some results obtained in this study provide useful information to attain the high efficiency grinding and the high mechanical properties of engineering ceramics.