http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다공질암의 동결융해 현상에 대한 이상물체 모델의 적용성 연구
한희수,백용,Han, Heui-Soo,Back, Yoog 한국터널지하공간학회 2010 한국터널지하공간학회논문집 Vol.12 No.5
동결융해과정이 지속적으로 반복되면서 발생되는 응력이력현상으로 인해 암반내의 피로현상이 누적되면서 암반내 누적 변위가 증가할 뿐 아니라 강도 역시 지속적으로 감소된다. 동결융해로 인한 응력의 hysteresis 현상은 대기온도의 영향에 의한 것으로, 일반적으로 점탄성 거동을 하게 된다. 그러므로, 이상물체를 이용한 암반해석을 위해, 일반적으로 점탄성 거동해석에 사용되는 Kelvin 모델을 적용할 수 있다. 또한 다공질암의 동결융해에 따른 열화 과정을 정량적으로 파악하기 위한 새로운 지표를 설정하고자 동결-융해 실험을 실시하였다. 본 연구에서는 다공성 응회암을 이용 동결-융해 실험을 실시 암석의 열화과정의 분석을 시도하였다. 실내실험 결과, 공극률의 변화를 정량화하여 열화특성을 설명하였다. 탄성계수 및 일축압축강도 등 암석의 물성변화를 공극률을 이용 열화 특성 함수로써 표현하였다. The accumulated displacements and fatigues of rock are increased by the stress-hysteresis, induced from repeated frost-thawing. Also the shear strength is decreased by them continuously. The stress-hysteresis is affected by the atmospheric temperature changes, whose behavior is visco-elasticity, usually. Therefore, to do ideal body analysis, Kelvin model could be used to analyze the frost-thawing behavior in winter. In general, rock slope failure occurs by the deterioration of rocks, which is caused by the repetition of freezing-thawing process. In order to keep the safety of such rock mass structures the deterioration process of rock needs to be described quantitatively using some meaningful parameters. In this work, the deterioration process in freezing-thawing cycle of tuff, which is a famous soft porous rock, is investigated through laboratory tests and successfully described as a differential equation for the change of porosity. And then, the deterioration of the mechanical properties of rock, such as Young's modulus and uniaxial compressive strength, are quantitatively described as a function of the porosity.
Safety Analysis of Plant Concrete Structure by Time Domain Reflectory
Heui-Soo Han(한희수),Yong-Gil Kim(김용길),Nam-Soo Kim(김남수) 한국생산제조학회 2007 한국공작기계학회 춘계학술대회논문집 Vol.2007 No.-
Most civil structure performance assessment, e.g., damage, failure, and non-destructive inspection approaches, are difficult to execute on hard-to-reach elements of a structure. These routine methods are also time-consuming, with uncertainties involved and not cost-effective because of technologies limits. In civil engineering field, the monitoring of element of a long-type structure by Time Domain Refectory (TDR) or Fiber Optic Sensor (FOS) is aimed at early detecting of the safety of structure through the analysis of obtained deformation data at numerous points along the axis of the element. This study presents reasonable relationships to estimate the concrete safety and deformation based on TDR data to analyze concrete temperature variance. To measure the temperature variance in civil structure, TDR composed of two copper lines is installed in concrete specimen, From the laboratory test, TDR system could make the correct information about temperature variance of concrete curing. Therefore it is concluded, at first the mechanism of correct concrete curing could be acquired by TDR system, secondly from curing data, construction process in field could be controlled properly, it would be much more effective to apply at health monitoring system in civil structure compared to conventional sensor or FOS systems.
한희수(Han, Heui-Soo),조재호(Cho, Jae-Ho),양남용(Yang, Nam-Yong),신백철(Shin, Baek-Chul) 한국지반환경공학회 2011 한국지반환경공학회논문집 Vol.12 No.10
현행 사면 안정 해석 시 지하수위 결정방법은 강우에 의한 침투과정에 의한 불포화구간을 제대로 반영하고 있지 못하고 있다. 본 연구에서는 강우에 의한 지표면 상부침투에 의한 포화대 증가에 따른 사면의 안전율 변화를 실내모형실험을 통해 검증하고자 하였다. 강우침투로 인한 흙의 전단강도 저하를 정확히 파악하기 위해 실내 사면모형실험을 통해 함수비 변화를 측정하고, 이에 따른 강도정수의 변화를 파악하였다. 포화깊이 3.0m에서 4.5m로 변할 때 안전율이 가장 크게 변화되는 것을 알 수 있었으며, 이는 설계기준에서 제시한 지하수위 (-)3.0m은 다소 과소 설계된다는 것을 판단할 수 있다. 또한, 지표면 포화로 해석할 경우는 과다 설계되므로 사면의 설계 시 강우 침투에 관한 실험 및 해석이 필요함을 알 수 있다. The unsaturated layers by rainfall infiltration are not properly reflected in construction codes to do slope design. The objective of this paper is to analyze the slope behavior according to the saturation layer increase resulted from the rainfall infiltration, to do that the laboratory slope model apparatus was adopted. From the model apparatus, the variation of water content and strength parameters of the model slope were analyzed. The safety factors of model slope was decreased, if saturation layer was increased from 3.0m to 4.5m, which means ground water level 3m selected from construction codes makes higher safety level. Also, if the ground water level is located in soil surface, the lower safety level will show up. Therefore, to make the proper slope design, the experiments and analysis of variation of saturation layer is needed.
한희수(Han, Heui-Soo),조재호(Cho, Jae-Ho),양남용(Yang, Nam-Yong),신백철(Shin, Baek-Chul) 한국지반환경공학회 2011 한국지반환경공학회논문집 Vol.12 No.11
본 연구에서는 터널의 상부에 작용하는 토압을 평가하는데 있어서 기존의 Terzaghi 공식이 가지는 문제점을 해결하기 위해 흙의 팽창성(Dilatancy)을 고려하여 Terzaghi 공식을 수정하였다. Terzaghi 공식과 수정식에 대한 수학적 해석결과, 터널의 토압은 수정식이 Terzaghi 공식에 비해 작게 나타났으며 토피고가 커질수록 그 차이는 증가하였다. 터널모형실험 결과와 비교해 본 결과, Terzaghi 공식에 의해 계산된 상부토압은 굴착 전 토압의 약 70%이며, 수정식에 의하면 약 60% 정도로 나타났고, 터널모형실험에 의해 측정된 토압은 약 40% 정도 임을 볼 수 있었다. 또한 유한요소해석을 이용하여 Terzaghi 공식과 수정식에 의해 산정된 터널 상부토압과 전단변형률을 비교해본 결과 수학적 해석결과와 동일하게 수정식이 Terzaghi 공식보다 작게 나타났다. In this study, Terzaghi"s formula was modified to solve problems considering the dilatancy effect of the soil for estimating the earth pressure acting on tunnel. It is performed for the comparison with Terzaghi"s formula and modified Terzaghi"s formula, tunnel model test result of Kobe University Rock Mechanics Laboratory. From comparison results of the earth pressure acting on tunnel, the earth pressure calculated by the Terzaghi"s formula was estimated largest value. The earth pressure measured through the tunnel model test was least value. The difference between the earth pressure derived from Terzaghi’s original formula and that derived from the modified formula was caused by the dilation effect, which was caused by the soil volume change. The difference between the earth pressure derived from the modified formula and the earth pressure measured through the tunnel model test, earth pressure results from the energy making failure surface. The results of FEM analysis were almost consistent with the results of mathematical analysis.