http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한택희,한상윤,한금호,강영종,Han, Taek-Hee,Han, Sang-Yun,Han, Keum-Ho,Kang, Young-Jong 한국방재학회 2003 한국방재학회논문집 Vol.3 No.2
구조적으로 콘크리트의 자중이 문제 시 되는 곳이나, 콘크리트의 재료비가 높은 경우, 수직부재로 중공 콘크리트의 사용이 경제적일 수 있다. 콘크리트의 구속효과를 발휘를 위해 외측 면을 띠철근으로 보강하고 내측 면에 강관을 삽입하여 보강한 원형 중공 콘크리트 기둥의 연성 거동에 관해 연구하였고, 압축강도와 콘크리트의 극한변형율을 증가시키는 구속력의 효과를 나타낸 Mander의 응력-변형률 관계를 사용하여, 모멘트-곡률 관계 해석을 유도하였다. 극한변형율에 영향을 주는 인자인 구속력을 발휘하는 철근의 철근비와 항복응력, 구속 콘크리트의 압축강도 등을 극한변형율과 횡철근비의 관계를 통하여, 강관 삽입된 원형 중공 철근콘크리트 기둥의 구속응력과 횡철근비의 관계식을 제안하였다. 제안된 횡철근비 관계식은 실험을 통하여 검증하였다. In locations where the cost of concrete is relatively high, or in situations where the weight of concrete members is to be kept to a minimum, it may be economical to use hollow R.C. members. The ductility of circular hollow R.C. columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. In this study, moment-curvature analyses are conducted with Mander's confined concrete stress-strain relationship. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.
한택희 ( Taek Hee Han ),김효산 ( Hyo San Kim ),장영두 ( Young Du Jang ),박윤호 ( Youn Ho Park ),강영종 ( Young Jong Kang ) 한국복합신소재구조학회 2010 복합신소재학회논문집 Vol.1 No.1
유한요소해석을 통하여, 지중 매설된 GFRP 관로의 거동과 좌굴안정성을 분석하였다. GFRP 관로에 토압과 차량하중과 같은 외압만이 작용하는 경우와, 외압과 함께 수압이 내압으로 작용하는 경우에 대해 해석을 수행하였으며, 해석 대상 관로는 현재 생산되는 GFRP 관로로 한정하고, 응력과 변위, 좌굴강도를 검토하였다. 또한, 관로 연결 플랜지의 응력집중 현상을 저감하기 위하여, 형상을 개선시킨 플랜지에 대해 해석을 수행하였다. 연결부 목 부위의 최대 응력을 검토하기 위한 캔틸레버 모델과, 지중 매설시의 모델 두 가지에 대해 해석을 수행하여 응력을 검토하였다. 해석결과 지중 매설된 GFRP 관로에 외압이 작용하는 경우와 좌굴에 대해서는 안전하였으며, 개선된 플랜지의 응력 집중도 상당히 저감되었음을 확인 할 수 있었다. Static analyses and buckling analyses were carried out for buried GFRP pipes by using finite element method. Vehicle loads, vertical and lateral soil pressures were considered as external loads, and supplying water pressure was considered as an internal load. Nine types of the factory-manufactured GFRP Pipes were analyzed. Their maximum stresses and displacements were compared with the limit displacements and ultimate stress. Additionally, stress analysis on an enhanced flange, which was designed to reduce stress concentration, was performed. A cantilever analysis was carried out to know the maximum stress on the neck of the flange, which is the critical part. And a static analysis was carried for the buried flange. The test results showed that GFRP pipes were safe and stable against the external loads. And they showed that the enhanced flange decreased about 35% of the stress concentration.
한택희(Taek Hee Han),원덕희(Deok Hee Won),유상량(Sang Ryang Yoo),박영현(Young Hyun Park),이선호(Sonho Lee) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
콘크리트 충전 이중강관(DSCT; Double-Skinned Composite Tubular) 풍력 타워의 조립 시공을 위해 모듈연결부를 제안하고 성능을 평가하였다. 연결 방식에 따라 3종의 연결부를 설계하고 실험을 수행하였으며, 일체형 DSCT 타워와 그 성능을 비교하였다. 준 정적실험을 수행한 결과 실험결과, 용접·몰탈 주입 방식으로 연결한 모듈형 DSCT 타워는 일체형 타워와 비교하여 유사한 거동 및 성능을 갖는 것으로 나타났다. 최대하중의 경우 일체형 시험체에 비해 약 1%정도 하중이 감소하였으나, 변위 연성도 측면에서는 더 우수한 성능을 보여 주어 본 연결방식이 모듈 연결에 충분한 성능을 확보하고 있음을 보여 주었다.
한택희,이진학,한상훈,원덕희,박우선,Han,Taek Hee,Yi,Jin-Hak,Han,Sang-Hun,Won,Deokhee,Park,Woo-Sun 한국방재학회 2013 한국방재학회논문집 Vol.13 No.3
지상 자원의 고갈 및 환경 문제, 인구 증가에 따른 식량 자원의 부족 등에 따라 세계 각국은 자원의 보고인 해양 자원 개발을 적극적으로 추진하고 있으며, 미래 인류 생활 영역의 확장 및 해양 관광 자원의 개발을 위하여 해저 공간 개발이 필요하다. 또한, 해양 공간의 개발과 해양 영토 주권 수호를 위한 전초 기지로서 해저 공간 개발과 해저 기지의 확보가 필요하며, 미래 경제성장 원동력으로서 해양 자원 및 해양 공간의 개발은 필수적이다. 고압/저온의 극한 환경인 해저 기지 건설 기술의 개발은 극지 및 우주공간 구조물 개발 시 활용되는 원천 기술 확보로 이어지며, 미래에 발생 가능한 전 지구적 재난 시, 인류 생존을 위한 필수 거주 공간 확보 기술로도 활용될 수 있다. 본 연구에서는 미래 해저기지의 개발을 위한 필수 기술을 조사하였으며, 1단계 기술과 2단계 기술로 구분하였다. 조사 결과 해저기지의 건설은 반드시 필요하며, 이의 건설을 위해서는 건설 신재료의 개발과 에너지 공급 기술들이 필수적으로 필요한 것으로 조사되었다. By the exhaustion of natural resources and the aggravation of the food situation, many countries are going ahead with development of the ocean space and ocean resources. To expand the border of human life, it is necessary to develop the underwater space. To perform these objectives, it is required to construct and secure a seabed base. The construction of a seabed base will also be the motive power for economy growth in the future. The key technologies to construct a seabed base under high pressure and low temperature conditions are the extreme engineering technologies and they are some parts of space engineering. They are also key technologies to survive when a worldwide-huge disaster attacks the earth. In this study, the necessary technologies for the construction of seabed base were surveyed. And the surveyed technologies were categorized by phase 1 and phase 2, which were defined by construction depth and size, and possible time. The surveyed results showed that it is necessary to construct a seabed base and develop a new constructional material and energy supplying method.