http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
재생연 제련 부산물인 황산연으로부터 정제 질산연의 제조
이진영,한춘,신중극,김성규,이화영,오종기,Lee, Jin-Young,Han, Choon,Shin, Joong-Kuk,Kim, Saung-Gyu,Lee, Hwa-Young,Oh, Jong-Kee 한국자원리싸이클링학회 1998 資源 리싸이클링 Vol.7 No.2
2차납 제련공정에서 발생한 주성분이 황산납인 연진으로부터 고부가가치제품인 정제 질산납을 생산하는 습식공정을 개발하였다. 본 공정은 탄산염에 의한 탄산화 공정과 저농도 질산용액을 이용한 침출공정 및 정제 공정으로 구성되어 있으며 본 공정을 통하여 99%이상의 순도를 가진 질산납을 제조할 수 있었다. Hydrometallugical process was developed to produce the purified lead nitrate from lead dust mainly composed of lead s sulfate generated from lead-acid battery smelter as by-product. This process consisLed of carbonation process with carbonate s salts, leaching and purification processes. FmaJJy crude lead nitrate purified to produce high-purity product with over 99% Pb $(NO_3)_2$.
생활폐기물(生活廢棄物) 소각(燒却)바닥재의 재활용(再活用)을 위한 연구(硏究)
안지환,오명환,한춘,Ahn, Ji-Whan,Oh, Myung-Hwan,Han, Choon 한국자원리싸이클링학회 2008 資源 리싸이클링 Vol.17 No.1
국내의 생활폐기물의 처리 방법은 매립에서 소각으로 이동해 가고 있으며 이를 통하여 발생되는 소각재의 처리에 대한 비중이 점차적으로 증가하고 있다. 소각재는 90%가 바닥재로 존재하며, 바닥재는 재활용 가능한 성분을 함유하고 있기 때문에 재활용을 위한 활발한 연구가 필요하다. 예를 들어 미국과 유럽 그리고 일본의 경우 여러 분야에서 바닥재의 재활용이 이루어지고 있으며 이에 따른 환경적 경제적 효과를 얻고 있다. 하지만 이와 대조적으로 국내의 경우 소각재 관리 처리 시 대부분 매립에 의해 의존하고 있는 실정이다. 따라서 소각재의 발생특성과 성상을 조사 분석하고, 국내외의 소각재 안정화 및 재활용기술에 대한 기술조사와 평가를 기반으로 한 처리방안에 대한 연구가 절실히 요구된다. The treatment of domestic municipal solid waste has inclined to incineration process instead of disposal in landfills. So, the amount of ash generated by incineration of municipal solid waste is gradually increased. The incineration ash divides into bottom ash and fly ash. The bottom ash which accounts for about 90% of the incineration ash consists of ceramics, glasses and metals. And it can be used as the recycling product by the stabilization process. For example, the bottom ash is used as secondary building material or for other similar purposes such as road sub-bases and noise barrier in USA, Europe and Japan. But, the stabilization-treatment technique of bottom ash sti11leaves much to be desired in Korea. Thus, the domestic study of recycling about bottom ash must be improved through investigation about the chemical property and technique of stabilization.
합성(合成) 추출(抽出) 수지(樹脂)를 이용(利用)한 백금용액(白金溶液)으로부터 알루미늄과 철(鐵)의 분리(分離)
임광일,한동혁,황인성,한춘,이진영,김준수,박형규,Lim, Gwang-Il,Han, Dong-Hyuk,Hwang, In-Sung,Han, Choon,Lee, Jin-Young,Kim, Joon-Soo,Park, Hyung-Kyu 한국자원리싸이클링학회 2011 資源 리싸이클링 Vol.20 No.3
수지합성 시 추출제의 고른 분산과 균일한 입자를 만들어 알루미늄과 철의 추출량을 증가시키고자 반응 개시제인 benzoyl peroxide(BPO)의 첨가법을 변화시킨 결과 세 번 나누어 첨가한 3pot의 성능이 가장 우수하였다. D2EHPA를 이용하여 합성한 수지의 경우 Fe와 Pt간에 Fe는 100% 추출되었으며, Al과 pt간의 분리실험에서 99.9%의 Al이 추출되었다. 수입되는 $P_{204}$ 수지 역시 Fe와 Pt간의 분리실험에서 100%의 Fe가 추출되었으며 Al과 Pt간의 분리실험에서는 98.9%의 Al이 추출되는 것을 확인하였다. 합성수지와 $P_{204}$내 추출제 함량은 각각 61.8, 60%이며, 이러한 차이가 추출효율에 차이를 가져오는 것으로 판단된다. 한편 두 수지 모두 $55^{\circ}C$까지는 Al과 Fe의 추출효율이 증가하나, 그 이상의 온도에서는 영향이 없는 것으로 확인되었다. FT-IR분석 결과 추출제에 따른 고유의 피크를 $1000cm^{-1}$에서 확인할 수 있었으며 합성한 추출 수지와 $P_{204}$ 수지 모두 $2900cm^{-1}$에서 가교 폴리스틸렌의 특징적인 피크를 확인하였다. For the separation of aluminum and iron from platinum mixtures, extraction resins were synthesized and separation efficiencies were compared with those by commercial one, $P_{204}$. During synthesis, the suspension polymerization method was adopted with D2EHPA as an extractant. Also, benzoyl peroxide as a starter was divided into 3parts and injected for the uniform size and dispersion of resin particles. Comparison tests resulted in 100% separation of Fe and Pt for both synthetic and $P_{204}$ resins. In case of Al and Pt, synthetic and $P_{204}$ resin gave extraction efficiencies of 99.9% and 98.9%, respectively. Difference in extractant contents of synthetic resin(61.8%) and $P_{204}$(60%) was considered to give differences in separation efficiencies of aluminum and iron elements. For both resins, separation efficiencies of Al and Fe increased up to $55^{\circ}C$. According to FT-IR analyses of both resins, specific peaks of D2EHPA and crosslinked polystyrene were identified at the wavenumber of $1000cm^{-1}$ and $2900cm^{-1}$ respectively.
폐광산 광미의 무해 처리를 위한 분말 석회석의 활용에 관한 연구
김영석,오종기,김성규,이화영,한춘,Kim, Young-Seog,Oh, Jong-Kee,Kim, Sung-Gyu,Lee, Hwa-Young,Han, Choon 한국자원리싸이클링학회 2000 資源 리싸이클링 Vol.9 No.2
복구되지 않은 폐광산 광미에 의한 산성광산매수가 문제를 일으킬수 있는 기간에 대하여 column 실험에 의한 모델링을 통하여 규명하였고, 이러한 문제를 해결하고자 석회석을 이용한 경제적이고도 환경 친화적인 기술을 제시하였다. 이 방법은 원천적으로 중금속이 침출 수나 유입 수에 미 반응하여 영구히 안정상태를 유지하는 것인데, 석회석을 주 혼화재로 하여 석회석과 광미를 교차로 적층하는 복구기술이다. 이렇게 석회석으로 복구하면 국내에 대량으로 부존되어 있는 거 품위 석회석 자원을 활용할 수 있어 경제적일 뿐만 아니라 환경 친화적이다. A period of widespread damage to the surroundings by acid mine drainage was examined by modeling using column device, and the method to solve this problem was worked out. the underlying principle is to let the tailings permanently maintain a stable state not being reacted with the underground water, and the method is that the tailings and limestone are piled up alternatively. This reclamation method is economic and environmentally useful because of practical use of a large amount of low-grade natural limestone.
정대희,이진영,정태진,한춘,Jeong, Dae-Heui,Lee, Jin-Young,Jeong, Tae-Jin,Han, Choon 한국에너지학회 1998 에너지공학 Vol.7 No.1
본 연구에서는 순간 고온식 tubing-bomb reactor를 사용하여 Alaska산 아역청탄과 폴리프로필렌(PP)의 공동액화시 상승효과 및 특성을 분석하고자 하였다. 석탄과 PP의 조성 및 수소공여용매의 양을 변화시켜가며 공동액화시와 각 물질의 단독액화를 비교시 상당한 상승효과를 파악할 수 있었다. 즉, 43$0^{\circ}C$ 및 45$0^{\circ}C$에서 30분간(석탄 2g+PP 2g)을 tetralin 4ml와 함께 공동액화시 단독액화에 비해 각각 20.0, 11.6%의 상승효과를 가져왔다. 한편, GC 분석 결과 PP액화시 tetralin으로부터 수소공여가 이루어지지 않은 것으로 밝혀졌으며 석탄 단위질량액화시 tetralin의 naphthalene으로 전환량은 0.70~0.83으로 나타났다. 또한 decalin 추출로 공동액화시 석탄과 PP 각각의 전환율을 구하여 석탄 또는 PP 단독액화시의 액화율과 비교한 결과, 43$0^{\circ}C$에서 석탄혼합물 대 tetralin의 비가 1:1인 조건에서 20% 상승효과는 PP의 액화율 상승이 주도한 것으로 나타났으며 석탄이 PP분해시 촉매 효과를 나타내는 것으로 해석되었다. Synergistic effect and characteristics of coliquefaction with Alaskan subbituminous coal and polypropylene (PP) were investigated in a tubing-bomb reactor. Coliquefaction results showed considerable synergistic effect on conversions for various coal/PP compositions and tetralin addition. Therefore, coliquefactions conversions at 430$^{\circ}$C and 450$^{\circ}$C with (coal 2 g+PP 2g) and 4 ml tetralin appeared 20.0 and 11.6 per cent higher respectively compared to the conversion of (coal+tetralin) and (PP+tetralin) liquefactions. According to gas chromatographic analyses, hydrogen was not needed during PP liquefactions. On the other hand, 0.70~0.83 part of tetralin per part of coal was converted into naphthalene by donoring hydrogen to free radicals during liquefaction. Also, extraction results by decalin proved that synergistic effect of coliquefaction were mainly due to PP decomposition catalysed be coal.
CaCO<sub>3</sub> 첨가법에 따른 재생 ONP의 특성변화
안영준,남성영,엄남일,안지환,한춘,Ahn, Young-Jun,Nam, Seong-Young,Um, Nam-Il,Ahn, Ji-Whan,Han, Choon 한국세라믹학회 2014 한국세라믹학회지 Vol.51 No.2
In order to improve the refresh rate of old newspaper(ONP), PCC shape-controlling experiments were carried out. The effect of a PCC polymorph on improving the quality of old newspaper was studied for a transformation from waste paper to eco-friendly paper. The synthesis of PCC consists of an in-situ process and a loading process to enhance the refresh rate of old newspaper. The characteristics between the in-situ process and the loading process could be analysed by SEM analyses of coated fiber surfaces. The retention rate ranges from 65 to 67% after the application of the in-situ process, and that after the loading process ranges from 55 to 58%. The retention rates thus show a difference of about 7-10%. In addition, the whiteness and ERIC characteristics of the in-situ process gave more efficient results than those of the loading process.