RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        건축문화재 지진 위험도 평가를 위한 지반의 내진해석

        한중근(Jung-Geun Han),전성곤(Seong-Kon Keon),홍기권(Kikwon Hong) 한국지반신소재학회 2013 한국지반신소재학회 논문집 Vol.12 No.4

        본 연구에서는 시울지역 내 분포하고 있는 15개 지역의 문화재 주변지반에 대하여 표면파탐사를 바탕으로 하는 지반조사결과를 이용하여 수치해석 기반의 3차원 내진해석을 수행하였으며, 해석결과를 기반으로 지반변위를 분석하였다. 해석결과, 지반의 변위는 (구)공업전습소 본관이 최대 약 9.7mm로 나타났다. 이와 같이 변위가 작게 나타난 원인은 문화재가 위치한 지역의 토층이 매우 단단하기 때문으로 표면파 탐사를 통해서 분석된 지반가속도를 비교해 보아도 하부에 매우 단단한 암층이 존재하는 것으로 확인되었다. 그러나 낙성대 삼층석탑에 있어서, 지반 자체의 변위는 다른 지역과 유사하게 나타났으나 화강암으로 구성된 석탑은 상부에서 최대 30mm의 변위를 나타냈다. 이는 낙성대 삼층석탑을 지지지하는 지반의 경우 지진파에 대한 상호 보완을 할 수 있는 구조, 즉 지반반력으로 인한 감쇠효과가 나타나기 때문에 지반의 변위 자체는 작게 해석되었으나 상부 구조물의 경우에는 지진파가 작용하였을 때 응력해방에 기인하여 변위가 가장 많이 발생한 것으로 판단된다. This paper describes the earthquake risk evaluation of 15 sites of architectural heritages, which are considered ground conditions of sites in Seoul. In order to acquire the input data of earthquake response analysis, surface wave exploration was performed at the site. Earthquake response analysis and 3D earthquake safety evaluation were carried out under the base of scenario earthquakes. Ground displacements of areas, which are located on architectural heritages, are showed about 0.5 mm ~ 9.7 mm, and it was analyzed to small affected by earthquakes. In case of Naksungdae three-story stone pagoda, ground displacement is similar to the others. However, displacement of three-story stone pagoda with granite is 30 mm on the top, because the greatest occurrence of that is caused by stress release at seismic wave effect.

      • KCI등재후보

        영향인자를 고려한 절토사면 보강공법 선정기법

        한중근(Han Jung-Geun),이종영(Lee Jong-Young),이명호(Lee Myung-Ho),최풍곤(Choi Poong-Kon) 한국토목섬유학회 2007 한국지반신소재학회 논문집 Vol.6 No.2

        본 연구에서는 절토사면 공법선정시 고려해야 할 영향인자에 대한 가중치 결정과 사면보강공법 선호도를 AHP기법을 이용하여 분석하였다. 연구, 설계, 시공업에 종사하고 있는 전문가를 대상으로 분석한 결과 공법선택시 안정성 및 내구성, 환경성이 가장 중요한 영향인자로 조사되었으며, 안전율 증가법 위주로 분석된 사면보강공법 선호도 조사에서는 경제성과 유지관리 용이성, 안정성에서 가장 우수한 평가를 받은 옹벽공법과 절토공법이 가장 선호도가 높은 공법으로 분석되었다. Analysis was performed using AHP (Analytic Hierarchy Process) technique for the determination of priority on the effect factors and the preferences on cut-slope reinforcing methods. The results from professional group, such as researchers, design engineers and construction engineers, show that stability, durability and environmental condition are the most important effect factors. The retaining wall and the cutting methods were predominant for stability, economical efficiency, and maintenance/management in the evaluation of preferences on the cut-slope reinforcing methods interpreted for the increasing method of safety factor.

      • KCI등재

        인발시험과 이론식을 이용한 강재스트립 보강재에 설치된 지지부재의 지지저항 특성 평가

        한중근(Han Jung-Geun),윤원일(Yoon Won-il),홍기권(Hong Ki-Kwon),홍원표(Hong Won-Pyo),이광우(Lee Kwang-Wu),조삼덕(Cho Sam-Deok) 한국토목섬유학회 2010 한국지반신소재학회 논문집 Vol.9 No.2

        본 연구에서는 강재스트립 보강재에 지지부재가 결속된 형태의 보강재에 대하여 인발시험을 수행하였으며, 인발시험결과와 기존에 제안된 지지저항 평가식에 의한 결과를 비교함으로서 인발변위 50㎜일 때의 인발력과 최대 인발력에 의한 지지부재의 지지저항 특성을 평기하였다. 인발변위 50㎜일 때의 인발력 적용에 의한 지지저항응력(б<SUB>b</SUB>)은 수직응력 증가에 따라 전면 전단파괴에서 펀칭전단파괴로 근접하였으며, 지지부재 개수의 증가에 따라서는 펀칭전단파괴에서 전면전단파괴로 근접하는 것으로 확인되었다. 최대 인발력을 적용한 지지저항응력(б<SUB>b</SUB>)은 수직응력 조건 및 지지부재 개수와 관계없이 전면전단파괴에 근접하였지만, 보강토옹벽의 허용변위를 고려한다면 설계 적용에는 무리가 있을 것으로 분석되었다. 그리고 Prandtl의 소성이론 및 원주공동확장이론에 의한 이론식을 이용한 지지저항 평가는 인발시험결과가 Prandtl의 소성이론을 이용한 예측결과에 보다 가까운 것으로 확인되었다. 또한 Prandtl의 소성이론 및 원주공동확장이론을 이용한 지지저항 평가모델은 전면전단파괴와 펀칭전단파괴모델 사이에 위치하는 것을 확인하였다. In this study, the pullout tests are conducted to evaluate pullout resistance of steel strip reinforcement with transverse members. The test results are compared with theoretical equations and then the failure mechanism of transverse members is evaluated. The bearing resistance stress(б<SUB>b</SUB>) of transverse members, which is applied pullout force at 50㎜ displacement, is closed from punching shear failure to general shear failure. The behavior by increment of a number of transverse members became closer to general shear failure. The behavior of transverse members at maximum pullout force, which is closed to general shear failure, is indicated that it is unrelated to normal stress and a number of transverse members. However, if the allowable displacement of reinforced soil wall is considered, it is impossible to apply in design. The test results are compared with bearing resistance evaluations using Prandtl's plastic theory and cylindrical cavity expansion theory. The analysis results are indicated that the bearing resistance by pullout tests is closed to predicted result by Prandtl's plastic theory, which are located between general shear failure and punching shear failure.

      • 옹벽겸용 흙막이벽으로 PHC 말뚝의 적용 사례 연구

        한중근(Han Jung-Geun),홍기권(Hong Ki-Kwon),어윤원(Eo Yun-Won),김상귀(Kim Sang-Kwi) 한국토목섬유학회 2006 한국지반신소재학회 논문집 Vol.5 No.3

        지반굴착에 의한 일반적인 흙막이공과 친환경성을 만족시키기 위한 조경 및 보강옹벽 등의 시공을 동시에 적용하게 되면 시공기간이 증가하고, 이에 따른 비용도 커지게 된다. 이러한 단점을 극복하여 흙막이벽과 옹벽구조물의 기능을 동시에 가지는 옹벽겸용 흙막이벽 공법이 제시된 바 있다. 하지만 기존에 제시된 공법은 굴착깊이에 대한 한계성을 가지고 있기 때문에 본 연구에서는 기존 공법을 응용한 설계패턴을 제시하였고, 시공사례를 통하여 응용설계법에 대한 시공성 및 안정성을 평가하였다. 그 결과, 배면의 여유공간이 부족한 현장의 경우 일반적인 흙막이벽이 갖는 말뚝의 변위 및 굴착한계깊이가 다소 해결될 수 있는 공법으로서의 적용이 가능함을 확인할 수 있었다. The construction of earth retaining wall and structure which get environmental element have to appling at the same time, then construction period and construction cost increase. These system which is presented to overcomes shortcoming and have function of earth retaining wall and retention wall at the same time. However, because existing method has limit excavation depth, the advanced design pattern more than existing method, rows of pile was applied. The workability and stability of applied design method are evaluated through analyze of construction case. The results confirmed that application design method can solve displacement of pile and limit excavation depth in existing earth retaining wall.

      • 대규모 보강토옹벽 구조물에서의 기초지반 지지력특성 평가

        한중근(Han Jung-Geun),유승경(Yoo Seung-Kyung),조삼덕(Cho Sam-Deuk),이광우(Lee Kyang-Woo),홍기권(Hong Ki-Kwon) 한국토목섬유학회 2006 한국지반신소재학회 논문집 Vol.5 No.1

        국내에서는 여라 가지 형상 및 친환경적인 보강토옹벽 구조물의 시공은 최근 많이 확대되고 있다. 전체구조물의 안정과 더불어 블록에 발생되는 균열은 대부분 원인으로 기초의 침하에 의한 경우가 많다. 본 연구에서는 기초지반의 부등침하와 관련하여 기초지지력의 설계시 평가법 및 시공사 평가법에 대하여 고찰하였다. 현장에서 실시되고 있는 실제 시공사례를 이용하여 보강토옹벽의 안정을 기초지지력을 만족하지 못하는 경우에 대한 대책방안을 제시하고 그 방안의 활용성을 제시하였다. 보강토옹벽의 기초부분은 전처1사변의 잠재적 활동변의 범주내에 있게 되므로 기초지지력을 담당하는 지반은 지반의 활동저항력에 영향을 받게 된다. 따라서, 기초지지력을 부담하는 기초지반은 지지력에 대한 안정을 만족할 뿐 만 아니라 전체사면활동에 저항하는 억지능력에 대하여도 고려되어야 한다. The reinforced soil retaining wall structures of serious types with environmental are widely expanding more and more in Korea, which divided conventional type's reinforced soil retaining wall on segmental retaining wall. The causes of most crack occurred at block in reinforced soil retaining wall structure caused by the differential settlement of foundation. It is difference of settlement for significant factor that with overall slope stability. In this study, design assessment of foundation bearing capacity related to differential settlement of foundation ground was considered. And, also, through case study, the count-ermeasure methods and its application were suggested that the bearing capacity of foundation had to stabilize. The foundation ground in charge of bearing capacity should be affected by the resisting force of sliding, because the foundation parts of reinforced soil retaining wall were belongs to potential slope sliding area in overall stabilizing including retaining wall structures. Therefore, the analyzing or the designing of bearing capacity for foundation should be considered control capacity on the overall slope sliding.

      • KCI등재

        중금속으로 오염된 지반의 침하계측을 위한 수치사진측량의 적용성 평가

        한중근(Jung-Geun Han),박정준(Jeong-Jun Park),유승경(Seung-Kyong You),윤중만(Jung-Mann Yun),홍기권(Gigwon Hong) 한국지반신소재학회 2020 한국지반신소재학회 논문집 Vol.19 No.4

        본 연구에서는 오염된 지반의 정화 시에 발생되는 침하량 계측에 대한 VMS의 적용성을 평가하기 위하여, 오염지반의 침하에 대한 실내실험을 수행하였다. 즉, 수치사진측량기법을 기반으로 개발된 3D-Visual Monitoring System(VMS)와 기존 계측장비인 토탈스테이션을 이용하여, 오염지반 침하에 대한 계측결과를 비교하였다. 실험결과, 중금속으로 오염된 지반의 침하량은 친수성 필터가 적용된 실험조건에서 많이 발생하였다. 계측결과를 바탕으로 VMS의 오차범위를 산정한 결과, 최소 및 최대 오차범위는 각각 ±0.36mm와 ±0.87mm 산정되었고, VMS의 오차량은 모든 실험조건에서 오차범위를 만족하는 것으로 확인되었다. VMS의 평균오차율을 산정한 결과, 소수성 필터조건에 비하여 친수성 필터 조건에서 낮은 평균오차율을 보였다. 이를 바탕으로 오염된 지반의 침하량 계측에 있어서 VMS의 적용이 가능한 것으로 평가되었다. This study describes the results of laboratory model test on settlement of soil contaminated with heavy metals, in order to evaluate the applicability of VMS to the measurement of gound settlements generated during the purification of contaminated soil. The measurement results for settlement of contaminated soil were compared using a 3D-Visual Monitoring System (VMS) based on digital photogrammetry and a total station. The test result showed that the settlement of the soil contaminated with heavy metals occurred a lot in the experimental condition in which the hydrophilic filter was applied. The minimum and maximum error ranges of VMS were calculated as ±0.36mm and ±0.87mm, respectively, and the error of VMS was satisfied in all experimental conditions. The average error rate of VMS was lower in the hydrophilic filter condition than in the hydrophobic filter condition. Therefore, it was evaluated that VMS can be applied to measure the settlement of contaminated soil.

      • KCI등재

        석산개발 사례를 이용한 주변 지역의 중금속 오염분석 및 대책방안에 관한 연구

        한중근(Han Jung-Geun),윤원일(Yoon Won-il),이양규(Lee Yang-Kyu),이종영(Lee Jong-Yuong),홍기권(Hong Ki-Kwon) 한국토목섬유학회 2010 한국지반신소재학회 논문집 Vol.9 No.4

        본 연구에서는 현장사례를 이용하여 석산개발이 주변 지역에 위치하는 토양 및 하천의 중금속오염에 미치는 영향을 분석하였으며, 분석결과를 비탕으로 중금속오염에 대한 대책방안을 제시하고자 하였다. 석산개발 부지 인근의 하천 및 토양의 중금속오염 조사결과, 석산개발로 인하여 발생된 미세석분 및 침출수가 삼막천으로 유입되면서 오염을 초래한 것으로 분석되었다. 또한 석산개발 주변지역의 중금속 오염도에 대해, 오염지수를 이용하여 평가한 결과, 오염된 지하수가 삼막천 오염의 주원인인 것으로 분석되었으며, 토양의 중금속오염은 오염된 지하수가 삼막천에 유입되어 중금속이 삼막천 하상에 퇴적된 것으로 확인되었다. 따라서 삼막천 오염의 주원인인 지하수에 대한 중금속 제어는 환경친화적인 반응물질이 적용된 투수성 반응벽체 (PRE, Permeable Reaction Barrier) 시스템을 통하여 수행하는 것이 바람직 할 것으로 판단된다. This study is described in heavy metal pollution by the stony mountain development using field case. The heavy metal pollution is investigated for nearby area (soil and stream) of the developed stony mountain, and then the countermeasure using contamination analysis is suggested. The investigation result indicated that contamination of Sammak stream caused by the stone dust and leachate at the stony mountain development. Therefore, the heavy metal pollution is evaluated by using Pollution Index(PI). The evaluation results confirmed that the contaminated groundwater was the leading cause of the contamination in Sammak stream and nearby soil. Therefore, the Permeable Reaction Barrier(PRB), which has a environmentally-friendly reactant, should be applied to control a heavy metal of groundwater, and it will be a reasonable countermeasure.

      • KCI등재후보

        설계사례를 이용한 전면 벽체/보강재의 연결강도 평가방법에 관한 비교 연구

        한중근(Han Jung-Geun),홍기권(Hong Ki-Kwon),신주옥(Shin Ju-Oek),조삼덕(Cho Sam-Deok),이광우(Lee Kwang-Wu) 한국토목섬유학회 2009 한국지반신소재학회 논문집 Vol.8 No.2

        블록식 보강토옹벽의 설계 시 국부적 안정성 평가에 있어서 실험적 방법을 통한 전면블록과 보강재 사이의 연결강도에 대한 특성을 평가해야 한다. 그러나 NCMA 및 FHWA에서 제안하고 있는 연결강도 평가방법을 적용할 경우에는 다소 보수적인 평가결과 나타나게 된다. 따라서 본 연구에서는 전면블록과 지오그리드 보강재 사이의 연결강도 시험을 수행하였다. 또한 시험결과를 NCMA, FHWA 및 Soong & Koerner가 제안한 평가방법에 의해 블록식 보강토옹벽 설계사례에 적용하였다. 그 결과, Soong & Koerner에 의해 제안된 연결강도 시험으로부터 얻어진 극한연결강도를 허용연결강도로서 적용하여도 설계시 요구되는 안정성을 만족하는 것으로 나타났다. The connection strength between wall facing and geosynthetics should be evaluated by experimental method in the design of reinforced earth wall. However, the evaluation result of connection strength using the typical design method, FHWA(1996) and NCMA(1997), is excessively because of a safety factors. Therefore, this study is conducted in connection strength test between wall facing and geosynthetics, then the test result is applied to the design case by NCMA, FHWA and Soong & Koener(1997). The results confirmed that the evaluation method by Soong & Koener, which is used ultimate connection strength by connection strength test in allowable connection strength, is satisfied with stable in design.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼