고장력 강판 부분용입 맞대기 용접부의 피로균열진전수명 평가

한승호,신병천,이웅,최전호,Han, Seung-Ho,Shin, Byung-Chun,Lee, Woong,Choi, Jeon-Ho 대한용접접합학회 2003 대한용접·접합학회지 Vol.21 No.1

Fatigue behaviour of partially penetrated butt-welded joints in high strength steel plates, in which crack-like structural defect, i.e. lack of penetration(LOP), is inevitably introduced during welding processes, was investigated. Fatigue lives of two types of welded joints, namely X-grooved and K-grooved joints, were experimentally determined first. Observed fatigue crack propagation behaviours of the partially penetrated butt-welds were interpreted through considering 3-dimensional semi-elliptical crack shape in front of the LOP. Based on such interpretation, a fracture mechanical method to estimate stress intensity factors at the crack tip was proposed. Since the fatigue lift of the partially penetrated butt-welds was strongly influenced by the ratio of size of the LOP to thickness, D/t, the D/t was used as a main parameter to calculate the fatigue lift by using the proposed method. Comparison of the fatigue lift obtained experimentally and analytically agreed well with each other. Hence it is suggested that the method used in this work to predict fatigue lift of the partially penetrated butt-welds can be applied to real cases with improved lift-prediction capability.

비드형상 및 복수 표면균열의 확률적 특성을 고려한 필릿 용접부 피로수명 평가

한승호,한정우,Han Seung-Ho,Han Jeong-Woo 대한용접접합학회 2005 대한용접·접합학회지 Vol.23 No.3

The fatigue life of welded joints is associated with crack initiation and propagation life. Theses cannot be easily separated, since the definition of crack initiation is vague due to the initiation of multiple cracks that are distributed randomly along the weld toes. In this paper a method involving a notch strain and fracture mechanical approach, which considers the characteristics of welded joints, e.g. welding residual stress and statistical characteristics of multiple cracks, is proposed, in an attempt to reasonably estimate these fatigue lives. The fatigue crack initiation life was evaluated statistically, e.g. the probability of failure occurrence in 2.3, 50 and $97.7\%$, in which the cyclic response of the local stress/strain hi the vicinity of the weld toes and notch factors derived by the irregular shape of the weld bead are taken into account. The fatigue crack propagation life was simulated by using Monte-Carlo method in consideration of the Ad-factor and the mechanical behavior of mutual interaction/coalescence between two adjacent cracks. The estimated total fatigue life, $(N_T)_{P50\%}$, as a sum of crack initiation and propagation life under the probability of failure occurrence in $50\%$ showed a good agreement with the experimental results. The developed technique for fatigue lift estimation enables to provide a quantitative proportion of crack initiation and propagation life in the total fatigue life due to the nominal stress range, ${\Delta}S$.

Special Issues - 전기자동차 보급과 충전인프라 구축

한승호,Han, Seung-Ho 대한전기협회 2010 전기저널 Vol.- No.402

투수성 잔디블록 포장 하부 토양의 물리성

한승호,김원태,강진형,Han, Seung-Ho,Kim, Won-Tae,Kang, Jin-Hyoung 한국조경학회 2006 韓國造景學會誌 Vol.34 No.4

Impervious pavement is primary contributor to the malfunctioning of the urban water circulation system. The aim of this research is to provide basic information and data for new pavement materials and paving technology which could enhance the urban water circulation system. For the study purposes, physical properties of soils sampled from 16 stations were analyzed. The sampling spots were paved with grass block porous pavement material. The findings from the analysis are as follows. The hardness of soils under the pavement was $17{\sim}22mm$ for thoroughfare and $6{\sim}32mm$ for parking areas. The bulk density was $1.42{\sim}1.81g/cm^{3}$ for thoroughfare and $1.38{\sim}1.75g/cm^{3}$ for parking area. The solid phase ration was $46.9{\sim}62.5m^{3}/m^{3}$ for thoroughfare and $45.6{\sim}61.3m^{3}/m^{3}$ for parking area. The porosity was $37.5{\sim}53.1m^{3}/m^{3}$ for thoroughfare and $38.7{\sim}54.4m^{3}/m^{3}$ for parking area. The saturated hydraulic conductivity was $8{\sim}164mm/hr$ for thoroughfare and $14{\sim}201mm/hr$ for parking area. The saturated hydraulic conductivity of the H sample area (the area was completed three months ago) and that of the other area were compared. There was up to 80% decreases of the saturated hydraulic conductivity within one year after the completion of pavement. After the first year, decrease in the saturated hydraulic conductivity was modest. Also there are changes in both surface and under soil physical properties of the grass block porous pavement depending on compaction. The extent of change depends on the degree of compaction. All these factors are combined to influence the permeability of the soil under the pavements. The results of this suggest that it is required to develop a new pavement technology which ensures both the durability and porosity of the pavement to improve the water circulation system by applying Ecological Area Rate.

조경용 투수성 블록 포장의 열환경 특성

한승호,류남형,강진형,Han Seung-Ho,Ryu Nam-Hyong,Kang Jin-Hyoung 한국조경학회 2006 韓國造景學會誌 Vol.34 No.2

This study aims to measure and to analyze the thermal environment characteristics of the various permeable pavement materials such as grass pavement (GREEN BLOCK PARK), stone and grass pavement (GREEN BLOCK STEP), stone pavement (GREEN BLOCK MOSAIC) and wood pavement (WOOD BLOCK) under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, changes of the temperature on each pavement layer, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 5, 2005, $34.0^{\circ}C$) of the you. Some of main findings are: 1) The heat environment was worse on the wood pavements than on the stone pavement. This is mainly due to the low albedo of the wood pavements (0.37) while the albedo value of stone pavements is 0.41. Small heat capacity of the wood pavements also contributes to this difference. 2) The heat environment was worse on the stone pavements than on the turf pavements. This was mainly due to the evapotranspiration of the plant growth layer of the turf pavements. 3) The peak surface temperature was the highest on the wood pavements ($56.1^{\circ}C$). The peak surface temperatures on the stone pavements, the stone-grass pavements and the grass pavements were $43.1^{\circ}C,\;40.1^{\circ}C\;and\;37.9^{\circ}C$, respectively. 4) To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

유류오염 토양/지하수 정화를 위해 개발된 DSB(Deep-Site Biopile) System 현장적용특성

한승호,공성호,강정우,Han Seung-Ho,Kong Sung-Ho,Kang Jung-Woo 한국지하수토양환경학회 2005 지하수토양환경 Vol.10 No.2

본 논문은 유류로 오염된 부지를 DSB(Deep-site Biopile) system을 이용하여 정화함으로써 적용 가능한 현장특성을 평가하기 위한 것이다. 오염부지는 유류가 유출되어 깊이 약 2.5 m 부근에 위치하는 지하수의 흐름에 띠라 광범위하게 오염(총 $7,201m^3$) 되어 있었으며, 투수성이 좋은 Sand층으로 구성되어 있다. 부지 내 설치된 배관은 각 지점마다 독립적으로 제어될 수 있도록 하였으며, DSB system의 가동은 24시간을 기준으로 30분 가동/30분 정지되도록 하였다. 오염부지 내 오염원이 저감되는 현황을 파악하기 위하여 DSB system 가동시간에 따른 시료채취 작업을 수행한 결과, DSB system 가동 후 약 30여일 만에 총석유계탄화수소 및 BTEX 오염원이 약 50% 이상 저감되었으며 약 165일이 경과한 후에는 토양오염 확인기준 이하로 저감되어 정화작업이 정상적으로 완료되었다. 이와 같이 본 DSB system은 기존에 적용되어 왔던 생물학적 공법들과는 달리 높은 농도의 유류화합물로 오염되어 있는 토양 및 지하수를 약 6개월의 단기간에 효과적으로 처리할 수 있었으며 정화 system을 지상이 아닌 지중에 설치함으로써 별도의 부지가 확보되지 않은 경우에도 적용할 수 있는 특성이 있음을 알 수 있었다. The aim of this article is to assess the application characteristics of the site by remediating oil-contaminated area using DSB (Deep-site Biopile) system. In the contaminated area, the soil was composed of penetrable sand and the leaked oil was spread widely (total 7,201 cubic meters) through 2.5 meter deep underground water flow. DSB system was operated for 30 minutes intervals for 24 hours in a day (30 minutes opεration and 30 minutes stop). To check contamination level change in the contaminated area after DSB system was operated, samples were taken. The result from the site shows that BTEX/TPH contamination level was dropped 50% after 30-day operation of DSB system, and that contamination level was dropped below contamination level check standard after 165 days and the remediation was completed. Unlike traditional biological remediation methods DSB system could efficiently process soil and water which were contaminated by high levels of oil compounds.

전단 모드 압전 에너지 하베스팅용 친환경 세라믹 소재

한승호,박휘열,강형원,이형규,Han, Seung-Ho,Park, Hwi-Yeol,Kang, Hyung-Won,Lee, Hyeung-Gyu 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.9

Eco-friendly $(Na,K)NbO_3$ (NKN)-based piezoelectric ceramic materials were fabricated by conventional ceramic method for shear mode piezoelectric energy harvesting application. $NKN-LiTaO_3$ (LT) based compositions were adopted for the high $d_{15}{\times}g_{15}$ which is proportional to harvested energy density. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065LiTaO_3$ was found to be lie on the boundary of tetragonal and orthorhombic phases. With reducing Ta content, the dielectric constant decreased gradually while maintaining high $d_{15}$, which resulted in increased $d_{15}{\times}g_{15}$. The composition $0.935(Na_{0.535}K_{0.485})NbO_3-0.065Li(Nb_{0.990}Ta_{0.010})O_3$ was found to possess excellent piezoelectric and electromechanical properties ($d_{15}{\times}g_{15}=29\;pm^2/N$, $d_{15}$ = 417 pC/N, $k_{15}$ = 0.55), and high curie temperature ($T_c=455^{\circ}C$).

논단 3 - 하천 수변녹지 및 생태벨트 조성기술 개발

한승호,조용현,Han, Seung-Ho,Jo, Yong-Hyeon 한국하천협회 2009 하천과 문화 Vol.5 No.4

저수형 잔디블록 저수조 내 충진재료에 따른 저수량 및 초종별 증발산량

한승호,최준수,양근모,양병이,강진형,김원태,Han, Seung-Ho,Choi, Joon-Soo,Yang, Geun-Mo,Yang, Byoung-E,Kang, Jin-Hyoung,Kim, Won-Tae 한국조경학회 2006 韓國造景學會誌 Vol.34 No.5

The purpose of this study was to investigate the performance of porous grass block. For the investigation, Festuca arundinacea and Zoysia japonica 'Zenith' were planted, and the volume of evapotranspiration and remains were examined based on different materials in the water tank in the experiment of Festuca arundinacea, the volume of water storage of treatment with perlite ($10.84{\iota}/m^2$) was higher than that with drainage ($7l/m^2$). The difference between the two was $3.84/m^2$. The drainage treatment without water storage capacity showed the higher degree of dryness in turf grass. The volume of evapo-transpiration of treatment with perlite was the highest (21.57mm/week). The volume of evapotranspiration of treatment with sand was 19.57mm/week, and with treatment with drainage was 18.24mm/week. Based on the measured volume of daily evapotranspiration of $2.60{\sim}3.08mm\;d^{-1}$, it was determined that the unit with water storage capacity would store water of one to two days usage compared to unite without such storage capacity. In the experiment of Zoysia japonica 'Zenith', the volume of water storage of treatment with perlite was $10.77l/m^2$ which was similar to the former experiment. The volume of evapotranspiration of treatment with perlite and sand were 21.64mm/week and 20.64mm/week, respectively. In case of airtight water tank, the volume was measured as 22.06mm/week. Each treatment has no notable difference in the volume of evapotranspiration. In conclusion, from the investigation in this study, porous grass block with water tank was found to be effective in plant growth under low irrigation. As the ecological area ratio and vegetated porous pavement have became more emphasized, additional study of rain infiltration and reservoir effect are needed in the future.

에너지 하베스팅 응용을 위한 압전 세라믹 파이버-폴리머 복합소재의 연구 동향

한승호,강형원,이우성,박성대,백동수,Han, Seung-Ho,Gang, Hyeong-Won,Lee, U-Seong,Park, Seong-Dae,Baek, Dong-Su 한국전기전자재료학회 2010 전기전자재료 Vol.23 No.9