http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가토 악하선 도관 결찰과 절단 후 악하선 세포의 증식에 관한 전자 현미경 및 면역조직화학적 연구
한승우,김경욱,이재훈,Han, Seung-Woo,Kim, Kyung-Wook,Lee, Jae-Hoon 대한악안면성형재건외과학회 1998 Maxillofacial Plastic Reconstructive Surgery Vol.20 No.4
Obstructive sialadenitis of major salivary glands is a common entity that occurs either in sialolithiasis or in foreign-body obstruction of the excretory ducts. This is characterized histologically by the presence of duct-like structural groups in a highly fibrotic stroma. Although the pathologic features are well recognized, the various cell types involved in the atrophy and subsequent regeneration of the obstructed salivary gland have been controversial. For this reason, an animal model of obstructive sialadenitis that induced atrophy in the salivary gland was used. Experimental study was performed to observe changes of submandibular gland in rabbit and apply the results to clinical activity. Forty-five rabbits each weighing about 3Kg were used and divided into control and experimental group. In the experimental group, ducts of submandibular gland was ligated and cutted divided into each twenty rabbits. Rabbits were serially sacrificed on the 3rd, 5th, 14th, 30th day of experiment. The submandibular glands were dissected out at sacrifice and stained with H&E, MT, immunohistochemical stain and the histological examinations were carried out under the light and transmission electron microscope. After examination and comparison of all specimens, the results of this study were as follows: 1. In the features of H&E stain, moderate infiltration of inflammatory cell were present at 3rd day of experiment. The features of ductal metaplasia was observed after 7th day in the ligation group and destructive changes was continued. In the cutting group, atrophic changes were less severe than ligation group but the small ductule were separated from stroma after 7th day. 2. In the feature of MT stain, apposition of connective tissue was increased in all group, more active in ligation group. 3. In the features of immunohistochemical stain, ligation group showed increased PCNA positive response at 7th day and the higher activity of duct cells was observed. Severance group showed more PCNA positive response than ligation group at 30th day. 4. In TEM features, ductal metaplasia was started at 7th day and degenerative change with margination of nucleus had been severe. Although ductal metaplasia was seen in the severance group, more numerous granule in different size was founded than ligation group. From above results, degenerative change was identified with ductal metaplasia, apically apposition of granule, r-ER destruction in ligation group. Severance of duct elicit degenerative change of grandular cells but the change was less severe than ligation group and more PCNA positive cell was founded at acinar cell.
한승우,김완두,이학주,Han, Seung-U,Kim, Wan-Du,Lee, Hak-Ju 한국기계연구원 1994 硏究論文集 Vol.24 No.-
Water seal is composed of metal case, garter spring, and NBR. Axisymmetric, large deformation non-linear contact problems were solved by using the finite element method for the evaluation of performance of the water seal. Effects of the interference between seal and shaft, and the garter spring on the seal characteristics were considered in this analysis. The contact force and sealing performance increased as the interference and spring stiffness increases. And middle seal is main role sealing performance. Further research efforts are required to consider the effects of the garter spring stiffness, the eccentricity by the shaft or case, and the water pressure.
컨베이어용 풀리의 용접부위에 관한 파괴역학 설계기술 개발
한승우,이학주,우창수,이상록,Han, Seung-U,Lee, Hak-Ju,U, Chang-Su,Lee, Sang-Rok 한국기계연구원 1993 硏究論文集 Vol.23 No.-
The drive pulley, which is employed for loading and unloading raw materials in a steel mill, is usually manufactured by use of various welding processes. In this study the weldment in the pulley, in which TIG and $CO_2$ welding processes are used, has been analyzed from view point of fracture mechanics. Fracture toughness tests have been performed according to ASTM E813. A servo-hydraulic testing machine (10kN) has been employed. Also the crack propagation tests (Mode I) have been performed with compact tension specimen in compliance with ASTM E647. To predict the critical crack size in the weldment, finite element stress analysis for the drive pulley under real operating conditions have been performed. In addition, the residual stresses at the weldment and in heat-affected zone have been obtained by hole drilling method. The planar critical crack size have been predicted for the drive pulley by considering the stress analysis results and the residual stresses due to welding process. For the drive pulley considered in this study, it has been concluded that the most important factor in determining the critical crack size is the welding residual stress in the transverse direction. Also the effect of stress concentration at the root of the weldment have been noticeable. For the planar crack, the fatigue crack growth life from an initial crack size of 2mm to the critical crack size obtained as in the above have been predicted. The predicted lives were between 55, 900 and 72, 000 cycles depending on the shape of the elliptical crack. The predicted lives were in fairly good agreement for the drive pulley considered in this study.
Al(III) 응집제의 염기도에 따른 총인 제거효율의 변화
한승우,이철희,이재관,강임석,Han, Seung-Woo,Lee, Chul-Hee,Lee, Jae-Kwan,Kang, Lim-Seok 대한상하수도학회 2012 상하수도학회지 Vol.26 No.2
염기도를 달리하여 제조된 PACl에 대한 Al(III)종 분포는 염기도가 높을수록 monomeric Al(III)종은 적어지고, precipitate Al(III)종은 증가하는 것으로 나타났다. 염기도 13.6%의 경우에서는 monomeric Al(III)종이 81%, polymeric Al(III)종이 19%, precipitate Al(III)종은 0%로 monomeric Al(III)종이 주종을 이루고 있었다. 염기도 13.6%의 경우에서 재안정화 없이 80% 정도의 탁도제거 효율을 유지하고 있었으며, $UV_{254}$ 제거효율이 향상되는 것은 낮은 응집 pH 범위에서 유기물 응집효과가 우수하게 나타나기 때문으로 판단된다. 그리고 13.6% 염기도를 가진 PACl이 T-P 제거효율 및 $PO_{4}-P$의 제거효율이 가장 우수한 것으로 나타났으며 이는 높은 monomeric Al 성분에 기인하리라 판단된다. The analysis of Al (III) hydrolysis species with PACls prepared by different basicity showed that mononmeric Al species were reduced while precipitate Al species were increased with an increase in basicity for PACls. In the case of the PACl with 13.6% basicity, monomeric Al species were 81%, polymeric Al (III) species 19%, precipitate Al (III) species was 0%, as showing the dominant monomeric Al species. The PACl with 13.6% basicity showed above 80% of turbidity removal efficiency without any restabilization. In addition, the PACl with 13.6% basicity showed higher organic removal expressed by $UV_{254}$ which was caused by lower coagulation pH. The PACl containing the higher amount of monomeric Al species was the most beneficial for T-P and $PO_{4}-P$ removal.
한승우,김완두,이학주,Han, Seung-U,Kim, Wan-Du,Lee, Hak-Ju 한국기계연구원 1996 硏究論文集 Vol.26 No.-
Water seals are used in a washing machine to seal rotating shafts and to prevent the penetration of dust, dirt or water from the outside. The design parameters of water seals, that were the location of the garter spring, the angle of the seal lip, and the interference, were investigated by the computer simulations using the hyperelastic non-linear large deformation finite element analysis code. The maximum contact stress and the distribution of stress on the seal lip were obtained for various type of water seals. The best type among the several investigated seals was selected considering the contact force and the sealing performance.