http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레귤러라이제이션 기반 개선된 밀도 무관 퍼지 클러스터링
한수환,허경용,Han, Soowhan,Heo, Gyeongyong 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.1
FCM(Fuzzy C-Means)으로 대표되는 퍼지 클러스터링은 간단하면서도 효율적인 클러스터링 방법이지만, FCM에서 사용하는 목적 함수에서는 밀도가 높은 클러스터가 클러스터링 결과에 많은 영향을 미치도록 함으로써 클러스터 사이의 밀도 차에 의해 클러스터링 결과에 왜곡이 발생할 수 있다. 이러한 밀도 문제를 완화하는 방법의 하나로 FCM의 목적 함수에 밀도 차이를 보정할 수 있는 항을 추가한 EDI-FCM(Extended Density-Independent FCM)이 있다. 이 논문에서는 레귤러라이제이션을 이용하여 EDI-FCM을 보완한 Regularized EDI-FCM을 제안한다. 레귤러라이제이션은 해공간을 평탄화하고 잡음 민감성을 줄이기 위해 흔히 사용되는 방법으로, 클러스터링에서는 특정 클러스터가 클러스터링 결과에 미치는 영향을 줄이는 역할을 한다. 제안하는 방법은 FCM이나 EDI-FCM과 비교했을 때 실제 클러스터 중심에 빠르고 정확하게 수렴한다는 것을 실험 결과를 통해 확인할 수 있다. Fuzzy clustering, represented by FCM(Fuzzy C-Means), is a simple and efficient clustering method. However, the object function in FCM makes clusters affect clustering results proportional to the density of clusters, which can distort clustering results due to density difference between clusters. One method to alleviate this density problem is EDI-FCM(Extended Density-Independent FCM), which adds additional terms to the objective function of FCM to compensate for the density difference. In this paper, proposed is an enhanced EDI-FCM using regularization, Regularized EDI-FCM. Regularization is commonly used to make a solution space smooth and an algorithm noise insensitive. In clustering, regularization can reduce the effect of a high-density cluster on clustering results. The proposed method converges quickly and accurately to real centers when compared with FCM and EDI-FCM, which can be verified with experimental results.
개량형 Durometer의 경도치를 이용한 건조 시멘트 모르타르의 마감시기가 압축강도에 미치는 영향
한수환 ( Han Soo-hwan ),임군수 ( Lim Gun-su ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구는 개량형 Durometer를 이용하여 DM의 초결이전부터 종결사이 경도치에 따라 1회 미장을 실시하여 미장시기에 따른 압축강도 변화를 고찰하고자 하였다. 실험결과 압축강도는 60∼70 HD에서 미장을 실시할 경우 여타의 미장시기보다 높게 나타났다. 하지만, 미장을 70 HD에서 실시할 경우, DM의 표면부가 종결시간에 가까워 미장 시공성이 떨어지는 것으로 확인되었다. 따라서, 압축강도 및 시공성 측면에서 60 HD 시기에 미장시공을 실시하는 것이 가장 바람직한 것으로 분석되었다.
고무경도계를 활용한 경화 콘크리트의 초기재령 압축강도 추정
한수환 ( Han Soo-hwan ),최윤호 ( Choi Yoon-ho ),현승용 ( Hyun Seung-yong ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.2
This study investigates the feasibility tp estimate the compressive strength at early age in hardened concrete by applying Durometer D type. The result of the experiment showed that the compressive strength reached 5MPa 6 hours, and 55 HD when the hardness was measured with the type D of the Duometer. Through this, it is expected that it will be possible to estimate the compressive strength of the initial age and measure it by the age of 28 when using the Durometer D type in the ready-mixed concrete, which will be applied in practice.
주입 보수공법 적용시 콘크리트의 드릴링 가능 시기 고찰
한수환 ( Han Soo-hwan ),최윤호 ( Choi Yoon-ho ),현승용 ( Hyun Seung-yong ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.1
In this study, optimum time of drilling for injection of repair material was determined through surface stripping and cracking investigation by drilling from the 1 days to the 3 days of the age for the specimens with ∅100 mm. No surface stripping and cracking occurred on the third day of age, and the compressive strength value was above 14 MPa, which resulted in the appropriate time for drilling on the third day of age.
추정침 직경 변화가 응결 추정기의 응결시간 추정에 미치는 영향
한수환 ( Han Soo-hwan ),현승용 ( Hyun Seung-yong ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
본 연구는 AI가 탑재된 미장로봇의 미장작업 시기 판정용 응결추정기를 개발하기 위한 일련의 실험중 추정침 직경 변화에 따른 추정침별 경도치 발현 특성을 비교하고자 한다. 연구결과 초결이전의 경우 추정침 4.5 mm로 측정한 경도치가 타 추정침에 비해 높게 나타나는 경향을 보였으나, 그 이후 종결전후까지 추정침 모두 유사한 경향으로 나타나, 추정침 변화에 따른 경도치 변화는 미미한 것으로 사료된다.
개량형 Durometer의 경도치를 이용한 건조 시멘트 모르타르의 마감시기가 압축강도에 미치는 영향
한수환 ( Han Soo-hwan ),임군수 ( Lim Gun-su ),김종 ( Kim Jong ),한민철 ( Han Min-cheol ),한천구 ( Han Cheon-goo ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구는 개량형 Durometer를 이용하여 DM의 초결이전부터 종결사이 경도치에 따라 1회 미장을 실시하여 미장시기에 따른 압축강도 변화를 고찰하고자 하였다. 실험결과 압축강도는 60∼70 HD에서 미장을 실시할 경우 여타의 미장시기보다 높게 나타났다. 하지만, 미장을 70 HD에서 실시할 경우, DM의 표면부가 종결시간에 가까워 미장 시공성이 떨어지는 것으로 확인되었다. 따라서, 압축강도 및 시공성 측면에서 60 HD 시기에 미장시공을 실시하는 것이 가장 바람직한 것으로 분석되었다.