http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최훈,김형수,박선희,Choi, Hoon,Kim, Hyung-Soo,Park, Sun-Hee 한국축산식품학회 2013 한국축산식품학회지 Vol.33 No.5
The present study was carried out to assess dietary exposure and risk for the infant population by lead (Pb), cadmium (Cd), and arsenic (As) exposure through modified milk powder and formulas. Analysis of heavy metals was performed using a microwave device and inductively coupled plasma-mass spectrometry, the method for which was fully validated. Various samples (n=204), including modified milk powder, modified milk, follow-up modified milk powder, infant formula and follow- up formula, were collected from retail outlets and markets across Korea. The mean contents of heavy metals were Pb 0.0004 (modified milk)-0.010 (infant formula) mg/kg, Cd 0.002 (modified milk)-0.007 (follow-up formula) mg/kg, and As 0.004(modified milk)-0.040 (infant formula) mg/kg, respectively. For risk assessment, daily intakes of heavy metals through maximum intake of modified milk powder and formulas were calculated and compared with reference doses established by JECFA and WHO. The dietary exposures of heavy metals were $0.78-1.04{\mu}g$ Pb/d, $0.65-0.87{\mu}g$ Cd/d, and $2.25-3.00{\mu}g$ As/d, corresponding to 2.0-4.5%, 7.1-16.0%, and 0.4-0.9% of reference doses, respectively. Therefore, the level of overall dietary exposure to heavy metals for Korean infant through food intake was below 20% of the reference dose, indicating a low risk to infant consumers. 본 연구에서는 조제분유 및 조제식의 중금속 함량 실태 조사를 통해 우리나라 영 유아가 해당 식품을 섭취할 경우 중금속 노출수준에 따른 위해성을 평가하였다. 중금속 함량 실태조사를 위해 국내 유통 중인 조제분유 및 조제식 204건을 수거하여 분석한 결과, 납 함량은 평균 0.0004(조제우유)-0.010(영유아용 조제식) mg/kg이었고, 카드뮴 함량은 평균 0.002(조제우유)-0.007(성장기용 조제식) mg/kg이었으며 비소 함량은 평균 0.004(조제우유)-0.040(영유아용 조제식) mg/kg이었다. 조제분유 및 조제식을 최대로 섭취할 경우 중금속 노출량은 $0.78-1.04{\mu}g$ Pb/d, $0.65-0.87{\mu}g$ Cd/d, $2.25-3.00{\mu}g$ As/d으로 인체섭취한계량의 2.0-4.5%, 7.1-16.0%, 0.4-0.9%이었다. 따라서, 국내 유통되는 조제분유 및 조제식 섭취로 인한 중금속 노출수준은 JECFA 및 WHO의 인체노출안전기준보다 낮은 위해도를 보임으로써, 우리나라 영 유아는 조제분유 및 조제식에 존재하는 중금속의 위해성으로부터 안전한 것으로 사료된다.
최훈석(Hoon Seok Choi),김재훈(Jae Hoon Kim),오광근(Kawng Keun Oh) 대한기계학회 2015 大韓機械學會論文集A Vol.39 No.11
흑연은 우수한 열특성을 지니기 때문에 로켓 노즐목 재료로 많이 이용된다. 하지만 흑연은 소성영역을 동반하지 않으며 파괴되는 준취성 특성을 보이므로 일반구조재료와 비교해 보았을 때, 강도 관점에서 상대적으로 취약하며, 450°C 이상에서 산화가 발생한다. 따라서 흑연 재료의 실구조체 적용을 위하여 이 재료에 대한 기계적·열적 특성 평가가 요구된다. 본 논문에서는 ATJ 계열 흑연의 고온파단특성에 대한 실험적인 연구를 수행하였다. 특히, 온도와 하중, 그리고 산화조건을 변수로 두어 강도 및 파단특성에 대한 상관관계를 연구하였다. 이를 위하여 ASTM 규정을 준수하여 상온, 500, 1,000°C에서 일축 압축 및 인장시험을 수행하였으며, 파단면은 SEM 촬영을 통하여 분석하였다. Graphite material has been widely used for making the rocket nozzle throat because of its excellent thermal properties. However, when compared with typical structural materials, graphite is relatively weak with respect to both strength and toughness, owing to its quasi-brittle behavior, and gets oxidized at 450 °C. Therefore, it is important to evaluate the thermal and mechanical properties of this material for using it in structural applications. This study presents an experimental method to investigate the fracture behavior of ATJ graphite at elevated temperatures. In particular, the effects of major parameters such as temperature, loading, and oxidation conditions on strength and fracture characteristics were investigated. Uniaxial compression and tension tests were conducted in accordance with the ASTM standard at room temperature, 500 °C, and 1,000 °C. Fractography analysis of the fractured specimens was carried out using an SEM.
최훈,김대성,배현덕,Choi, Hun,Kim, Dae-Sung,Bae, Hyeon-Deok 대한전자공학회 2003 電子工學會論文誌-SP (Signal processing) Vol.40 No.5
인접투사 알고리즘(Affine Projection Algorithm: APA)에서 투사 차원은 적응필터 계수갱신에 사용하는 입력 벡터 요소 수이며, 이는 계수갱신을 위해 사용되는 투사 기저의 개수이다. 그리고 투사차원은 적응 필터의 수렴속도와 밀접한 관계가 있으며 알고리즘에서 필요한 계산량을 결정한다. 적응필터가 수렴함에 따라 수렴속도가 감소하게 되므로, 수렴속도를 결정하는 투사차원을 줄일 수 있다. 본 논문에서는 적응필터 계수갱신 시 계수벡터의 변화량을 수렴속도와 연관시켜 인접투사 알고리즘의 투사차원을 조정하는 가변 차원 인접투사 알고리즘(Variable Dimension APA: VDAPA)을 제안한다. 제안한 방법은 적응필터의 수렴정도에 따라 투사 기저 수를 조정함으로써 APA의 계산량을 줄인다. 컴퓨터 모의 실험을 통해 기존의 인접투사 알고리즘 및 NLMS 알고리즘과의 수렴속도, 계산량 면에서 성능을 비교하여 제안한 방법의 우수성을 확인한다. In the affine projection algorithm(APA), the projection dimension depends on a number of projection basis and of elements of input vector used for updating of coefficients of the adaptive filter. The projection dimension is closely related to a convergence speed of the APA, and it determines computational complexity. As the adaptive filter approaches to steady state, convergence speed is decreased. Therefore it is possible to reduce projection dimension that determines convergence speed. In this paper, we proposed the variable dimension affine projection algorithm (VDAPA) that controls the projection dimension and uses the relation between variations of coefficients of the adaptive filter and convergence speed of the APA. The proposed method reduces computational complexity of the APA by modifying the number of projection basis on convergence state. For demonstrating the good performances of the proposed method, simulation results are compared with the APA and normalized LMS algorithm in convergence speed and computational quantity.
최훈,배현덕,Choi, Hun,Bae, Hyeon Deok 한국음향학회 2004 韓國音響學會誌 Vol.23 No.3
본 논문은 부밴드 인접투사 알고리즘 (SAPA)을 소개한다. SAPA의 개선된 성능은 인접투사 알고리즘에 부밴드 구조를 적용함으로써 가능하다. 본 알고리즘에서 적응 필터의 계수 갱신식은 부밴드 필터링을 위한 분해 필터뱅크로서 OQF (Orthogonal Quadrature Filter)를 사용함으로써 간단하게 유도된다. 유도된 SAPA는 빠른 수렴속도와 적은 계산량을 갖는다. 유색 입력신호에 대한 제안한 알고리즘의 효과를 실험을 통해 평가하였다. This paper presents the subband affine projection algorithm(SAPA). The improved performance of SAPA is achieved by applying the affine projection algorithm to the subband adaptive structure. In this algorithm, the weight updating formula of adaptive filter is simply derived by using the orthogonal quadrature filter(OQF) as an analysis filter bank for subband filtering. The derived SAPA has the fast convergence speed and small computational complexity. The efficiency of the proposed algorithm for colored input signal is evaluated through some experiments.