http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유연성 기판 위에 증착된 ITO 박막의 공정 온도에 따른 전기적·광학적 특성 평가
최형진,윤순길,Choi, Hyung-Jin,Yoon, Soon-Gil 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.5
Off-axis magnetron sputtering was used for the crystallized ITO thin films deposition at various temperatures from 25 to $120^{\circ}C$. The ITO thin films were crystallized at $50^{\circ}C$ for Si (001) substrates and at $75^{\circ}C$ for PET substrate. The ITO thin films grown onto PET substrate at $120^{\circ}C$ were crystallized with a (222) preferred orientation. The 160-nm thick ITO films showed a resistivity of about $7{\times}10^{-4}{\Omega}{\cdot}cm$ and a transmittance of about 84% at a wavelength of 550 nm. Off-axis sputtering can be applied for low temperature crystallization of the ITO films.
측정치를 이용한 시간영역 모우드 특성 규명 기법 및 잡음에 대한 민감도 분석
최형진,이학은,Choi, Hyung Jin,Lee, Hak Eun 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.1
측정치를 이용하여 구조계를 규명하는 경우에 일반적으로 측정치를 주파수 영역으로 변환하고 이를 도식적으로 파악하는 방법이 주로 이용된다. 이러한 방법은 신뢰도가 낮고 토목구조물 특히 교량 구조물과 같이 근접한 모우드의 특성을 가지는 구조계의 규명에 불리한 것으로 알려져 있다. 본 논문에서는 시간영역에서의 데이터를 직접 이용하여 구조계의 모우드 특성을 규명하는 일련의 방법에 대한 적용성을 검토하였으며 이 때 발생할 수 있는 왜율에 대한 문제를 극복하기 위하여 최소자승법을 시간영역 규명기법에 중복하는 방법을 선택하였다. 제안된 방법의 타당성을 검토하기 위하여 현가계 모델을 이용하여 모의 해석을 수행하였다. 또한 실질적인 상황에서의 이용성을 검토하기 위하여 인위적인 잡음을 게재시켜 잡음에 대한 방범의 민감도를 검토하였다. The first Procedure to identify structural system by using measured data is transformation of data to frequency domain and try to recognize modal characteristics in graphical condition. Those methods are doubted about the reliability to the civil structures, especially bridges which has coupled and close modal characteristics. In this paper, feasibility of time domain modal Identification methods were examined and applied double least square method to overcome bias characteristics of the identification methods. To show the advantage of proposed method, simulation were carried out for mass-spring model. And to examine the usage of the method in realistic case, sensitivity of the methods to noise was performed.
Off-axis RF 마그네트론 스퍼터링법을 이용하여 저온에서 결정화된 ITO 박막의 특성
최형진,정현준,허성기,윤순길,Choi, Hyung-Jin,Jung, Hyun-June,Hur, Sung-Gi,Yoon, Soon-Gil 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.2
In this study, off-axis magnetron sputtering was used for the crystallized ITO thin films at a low temperature of about $120^{\circ}C$ instead of the conventional RF sputtering because the off-axis sputtering can avoid the damage for the plasma as well as fabrication of thin films with a high quality. The ITO thin films grown on PET substrate at $120^{\circ}C$ were crystallized with a (222) preferred orientation. 58-nm thick ITO films showed a resistivity of about $2{\times}10-4{\Omega}{\cdot}cm$ and a transmittance of about 75% at a wavelength of 550 nm. The transmittance of the ITO thin films by an insertion of SiO2 thin films on ITO films was improved.
유리 기판 위에 증착된 Al Doped ZnO 박막을 이용한 전자파 차폐 및 항균 특성의 동시 구현
최형진,윤순길,Choi, Hyung-Jin,Yoon, Soon-Gil 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.5
In this study, we intended to achieve both antibacterial properties and electromagnetic shielding using the Al-doped ZnO (AZO) films. FTS (Facial Target Sputtering) magnetron sputtering was used for the AZO thin films instead of the conventional RF sputtering because the FTS sputtering could avoid the damage for the plasma as well as fabrication of thin films with a high quality. The 300-nm thick AZO thin films grown on glass substrate showed a resistivity of about $7{\times}10^{-4}{\Omega}-cm$ and a transmittance of about 90% at a wavelength of 550 nm. AZO thin films were investigated for the electromagnetic shielding effectiveness measured by 2-port network method at 1.5 ~ 3 GHz. The AZO (300 nm)/glass films showed an EMI shielding effectiveness of approximately 27 dB. An antibacterial effect was measured by the film attachment method (JIS Z 2801). The percent reductions of bacteria by AZO films were 99.99668% and 99.99999% against Staphylococcus aureus and Escherichia coli, respectively.
Gyro Drift Model Using Structure Function and Effect on Control System Performance
최형진,Choi, Hyung-Jin 대한전자공학회 1989 전자공학회논문지 Vol. No.
본 논문은 gyro의drift에 관한 일반적 등가회로를 처음에 발진기의 위상안정을 규정화 하기 위하여 개발되었던 structure function 방법을 사용하여 분석하였다. 이 방법을 사용함으로서 임의의 order의 확정성, 내지 불확정성 성격의 Gyro drift가 쉽게 규정화되고 또 측정될 수 있음을 보였다. 그리고, drift의 power spectal density와 structure function과의 관계도 분명히 하였다. 마지막으로 이 방법을 이용하여 drift가 제어시스템에 끼치는 분석함이 매우 용이하게 됨을 보였다. This paper addresses modeling of the gyro drift by using the structure function approach which has been originally developed for characterization of the oscillator phase noise. It is shown that by using this approach, an arbitrary order of random and deterministic gyro drift processes can be characterized and easily measured. The relationship between the drift power spectral density and structure function is clarified. It is also shown that this approach simplifies analysis of the effect of drift on the control system performance.
탄화공정에서 하수슬러지와 폐목재 혼합물 이용한 고형연료의 특성 연구
최형진 ( Hyeong-jin Choi ),이승희 ( Seung-whee Rhee ) 한국폐기물자원순환학회(구 한국폐기물학회) 2016 한국폐기물자원순환학회 심포지움 Vol.2016 No.2
국내 500MW 이상의 발전사들은 기후 변화를 방지하는 정책에 의하여 총 발전량의 일정 비율 이상을 신재생에너지를 이용하여 공급토록 하는 RPS(Renewable Portfolio Standard) 제도를 이행해야한다. 산업통상자원부에 따르면, 발전사들의 RPS 과징금은 2012년 254억 원, 2013년 498억 원, 2014년 2억 5천만 원이 부과되었다. 2014 년도에 부과된 과징금이 거의 없는 이유는 대부분의 발전사들이 목재 펠릿을 수입하여 사용하였기 때문이다. 2014년도 목재 펠릿의 연간 총 소비량은 1,737,274 ton으로 이중 95.2%를 수입하고 있다. 이는 국내 자본이 해외로 유출되는 것으로 목재 펠릿을 대체할 수 있는 새로운 고형연료의 개발이 필요하며, 바이오매스를 이용한 고형연료 제조 방안이 좋은 대안이 될 수 있다. 하수슬러지는 국제 협약인 런던협약에 따라 2012년부터 해상투기가 금지되었다. 또한, 정부는 2012년도에 육상폐기물 해양배출 제로화 추진계획을 수립하여 2013년 분뇨와 분뇨슬러지, 2014년 산업폐수 및 폐수슬러지의 해양투기를 금지하였고 이에 따라 육상처리가 절대적으로 필요한 실정이다. 생활계 폐목재의 대부분은 가정에서 가구류 형태로 발생되며, 가공·처리·사용과정에서 접착제, 페인트, 방부제 등이 포함될 가능성이 있어 재활용률의 제고를 위해서는 탄화공정과 같은 열적처리 공정이 필요하다. 하수슬러지는 높은 회분과 낮은 발열량으로 연료로서의 가치가 낮으나 유해물질 저감이 가능한 다량의 Nucleophile 물질을 포함하고 있어 폐목재와 혼합하여 탄화한다면 연료의 가치 상승뿐만 아니라 폐목재에 포함된 유해물질의 저감이 가능하다. 따라서 본 연구에서는 하수슬러지와 폐목재 혼합물을 이용한 탄화공정에서 혼합비, 탄화 온도 및 시간을 변수로 하여 사성분 분석, 발열량, 연료비, 연소성지수, 수율을 Bio-SRF(Bio-Solid Refuse Fuel) 기준에 따라 평가하여 최적 탄화 조건을 도출하고자 하였다.
폐CCFL로부터 유가물질 회수 및 무해화 기술 적용성 평가
최형진 ( Hyeong-jin Choi ),최용 ( Yong Choi ),이승희 ( Seung-whee Rhee ) 한국폐기물자원순환학회(구 한국폐기물학회) 2021 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2021 No.-
CCFL(Cold Cathod Fluorescent Lamp)은 LCD TV, 모니터 등 LCD 디스플레이 백라이트용 광원으로 사용되고 있다. 세계 LCD 디스플레이 시장 수요는 2017년 약 180 백만㎡에서 2020년 약 210 백만㎡로 증가되었으며, 2023년까지 약 240 백만㎡로 확대될 전망이다. LCD의 수요가 증가됨에 따라 CCFL이 폐기물로 다량 배출될 전망이다. CCFL에 함유된 수은은 1개당 0.1~10 mg이며, LCD TV, 모니터 등에 사용되는 CCFL의 총 수은은 1 대당 약 5~100 mg이 포함되어 있다. CCFL에 포함된 수은은 증발하기 쉽고, 체내에 들어오면 미나마타병과 같은 수은 중독 증세(언어 장애, 청력장애, 감각 장애, 운동 장애, 사지 마비 등)가 발생될 수 있다. 국제적으로는 수은 및 수은화합물의 노출로부터 인간 건강과 환경 보호를 위해 ‘수은에 관한 미나마타협약(이하 미나마타협약)’을 채택하였으며, 미나마타협약은 수은 및 수은화합물의 제조ㆍ수출입ㆍ사용ㆍ폐기의 전 과정에 대한 관리를 명시하고 있다. 대한민국은 2019년 11월에 비준서 기탁하였고 2020년 2월 당사국이 되어 협약을 이행하고 있다. 2018년 9월, 국내에서는 제1차 자원순환 기본계획(2018~2027)이 발표되어 수은 폐기물에 대한 수은 회수 의무기준을 2027년까지 단계적으로 상향하여 70% 이상까지 회수 목표를 설정하였다. 본 연구에서는 폐CCFL부터 유가물질 회수 및 무해화 기술 적용성을 평가하기 위하여 Pilot Plant 규모의 폐형광등 재활용 설비를 활용하였다. 폐CCFL의 처리 공정은 수은의 유출방치를 위하여 Closed System에서 수행되었으며 파쇄공정, 선별공정, 수은증류공정 등을 통해 처리되었다. 회수된 물질의 무해화 여부를 검토하기 위하여 폐기물공정시험기준에 따른 수은 용출 및 중금속 함량분석과 US EPA 7473(Mercury in Solids and Solutions by Thermal Decomposition, Amalgamation, and Atomic Absorption Spectrophotometry)에 따른 수은 함량분석을 수행하였다.