http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최태균 ( T G Choi ),이희주 ( H J Lee ),류민영 ( M Y Lyu ) 한국고무학회 2014 엘라스토머 및 콤포지트 Vol.49 No.4
건축용 접착제로 활용되고 있는 부틸고무는 주로 시트의 형태로 사용된다. 본 연구에서는 컴퓨터 해석을 통해부틸고무 시트 압출용 다이를 설계하였다. 압출용 다이의 내부는 크게 매니폴드와 랜드로 나뉜다. 매니폴드는 다이중앙에서 유입되는 재료가 폭 방향으로 흐름이 이루어 지도록 하는 역할을 한다. 랜드는 재료가 흐름 방향으로 균일하게 흐르게 하여 균일한 두께의 시트가 성형되도록 한다. 다이는 매니폴드와 랜드 외에도 아일랜드를 설치하여 흐름의안정을 주도록 하는 경우가 많다. 본 연구에서는 컴퓨터 해석을 통하여 다이에서 매니폴드의 각도와 길이, 랜드 길이그리고 아일랜드를 설계 변수로 하여 다이 출구에서 다이 폭 방향으로 균일한 흐름이 형성되도록 하는 최적의 다이형상을 연구하였다. Butyl rubber is used as an adhesive and it is mainly used in the form of sheets. The goal of this study is to design an extrusion die for the butyl rubber sheets using computer simulation. The extrusion die for the butylrubbersheets consists of manifold area and land area. In the manifold area, flows are spread from the entrance of the extrusion die to the land area. In the land area, flows become stable to the flow direction and uniform sheet can be obtained. Island area is being installed in the land area to get uniform flow. Four parameters, angle of manifold, length of manifold, length of land and island, were examined in the computer simulation. The optimum geometry of the extrusion die is derived which has a uniform flow in the width direction of the die.