http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단결정 실리콘 태양전지를 위한 스크린 프린팅 Ag 전면전극의 표면 침투현상에 대한 연구
최준영(Choi Jun-Young),김도완(Kim Do-Wan),이은주(Lee Eun-Joo),이수홍(Lee Soo-Hong) 한국태양에너지학회 2006 한국태양에너지학회 학술대회논문집 Vol.- No.-
There are typically applied on both rear and front sides of metal contacts to the solar cell. Metallization of front grid line is an important factor of solar cells. Accordingly, the front contact formation is particularly sensitive to many parameters. Metallization on Si solar cells requires forming a contact without penetrating the emitter too deeply, this is largely dependent on the glass frit used in the paste. In this paper, the surface penetration of screen printed Ag paste contacts for silicon solar cells. It was found that penetration depth of Ag paste conductor depend on junction depth by diffusion process, as below 0.5㎛ on 1.0~1.2㎛ junction depth thought SEM-EDX analysis and conversion efficiency was 10.3% by solar simulator.
증례 : 감염 ; Streptococcus dysgalactiae의 침습적 감염 2예와 emm 유전자형 분석
허주연 ( Joo Yeun Hu ),김은희 ( Eun Hee Kim ),이혜원 ( Hye Won Lee ),차선아 ( Seon Ah Cha ),최준영 ( Joo Young Choi ),김윤정 ( Youn Jeong Kim ),김상일 ( Sang Il Kim ) 대한내과학회 2014 대한내과학회지 Vol.87 No.5
Streptococcus dysgalactiae Subspeciesequisimilis는 인후염, 봉와직염을 일으키지만, 심내막염, 균혈증과 같은 침습적인 감염을 일으키기도 한다. 이의 병원성에는 emm유전자에 의해 발현된 M단백질이 큰 역할을 하며 emm유전자에 대한 중요성이 대두되고 있다. 저자들은 Streptococcus dysgalactiae Subspecies equisimilis에 의한 심내막염와 봉와직염으로 인한 균혈증이 발생하여 효과적으로 치료한 증례 2예와 균주의 emm유전자 염기 서열 분석 결과를 보고한다. 최근 국내에서Streptococcus dysgalactiae에 의한 침습성 감염이 출현하는 것으로 보여, 이에 대한 주의 및 추후 이 균에 대한 유전자형 연구가 이루어져야 할 것으로 생각한다. Recently, invasive infections with the human pathogen Streptococcus dysgalactiae subspeciesequisimilis (SDSE) have increased around the globe. Typing of the emm gene of SDSE, which encodes a virulence factor (M protein), has provided important information. Here, we report two cases of invasive SDSE infection that presented with endocarditis and bacteremia, and their emm gene types. (Korean J Med 2014;87:630-635)
증례 : 호흡기 ; 저절로 호전된 다발공동성 결절 형태의 IgG4 연관 폐 질환의 1예
박영준 ( Young Jun Park ),윤태욱 ( Tae Wook Yoon ),정근용 ( Geun Yong Jung ),정지환 ( Ji Hwan Chung ),최준영 ( Joon Young Choi ),김은주 ( Eun Joo Kim ),임효정 ( Hyo-jeong Lim ) 대한내과학회 2016 대한내과학회지 Vol.90 No.5
IgG4 연관 폐 질환은 다양한 방사선학적 형태로 나타난다. 공동화를 동반한 다발성 폐 결절의 경우, 감별 진단으로 다발성 폐 전이, 결핵 또는 진균 감염, 패혈성 폐렴 등을 우선적으로 고려하게 된다. 본 증례는 임상적으로 다른 질환에 합당하지 않은 경우라면 IgG4 연관 폐 질환의 가능성을 고려하여, 적극적으로 조직 검사를 시행할 필요가 있음을 시사한다. 또한 본 증례는 스테로이드 치료 없이 저절로 소실된IgG4 연관 폐 질환의 국내 첫 보고의 의미가 있다. Immunoglobulin (Ig) G4-related disease was recently recognized as a systemic fibro-inflammatory disease characterized by dense lymphoplasmacytic infiltrates, storiform fibrosis, and obliterative phlebitis with IgG4-positive cells in the target tissues. This disease can localize to a single organ or be diffuse in multiple organs. Pulmonary manifestation in IgG4-related lung disease presents as various sized nodules, lung masses, patchy ground-glass opacities, consolidation, thickened bronchovascular bundles, nodular pleural lesions, and interstitial lung disease. Traditional treatment for IgG4-related lung disease includes systemic (cortico) steroids. Here, we report a case of IgG4-related lung disease presenting as multiple cavitary nodules that spontaneously regressed without systemic steroid use. (Korean J Med 2016;90:449-454)
CFT기둥에서 강관과 콘크리트 부착응럭의 해석기법 개선에 관한 연구
석근영,주기수,최준영,채승훈,강주원,Seok, Keun-Yung,Ju, Gi-Su,Choi, Joon-Young,Chae, Seoung-Hun,Kang, Joo-Won 한국공간구조학회 2007 한국공간구조학회지 Vol.7 No.2
건축물의 고층화, 대형화에 따라 기둥이 부담해야할 하중이 증대되고, 이로 인한 기둥단면적의 증대에 효율적으로 대처하기 위해 CFT(콘크리트 충전강관)기둥의 형식을 개발하게 되었다. CFT기둥은 이질재료로 구성된 복합구조형식으로, 역학적 거동을 규명하기 위해 많은 연구가 이루어지고 있다. 본 연구는 원형과 각형의 CFT기둥에 있어서 콘크리트 코어와 강관, 두 이질재료간의 접촉면 부착응력에 대한 해석적 연구로서 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 shear-connector의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면의 역학적 특성에 대한 개선된 해석기법을 제시하고자 한다. Buildings become high and large. CFT(Concrete Filled steel Tube) columns have been developed to manage effectively that loads which columns support and cross sections of columns are increased. Because CFT column is the composite structure made of two different materials, many researches have been performed to look into mechanical behaviors. This study is an analytic study about bond stress on interface between concrete core and steel tube in circular and rectangular CFT columns. ABAQUS/Standard Version 5.8 is used to analyze bond stress by bond form and position of shear-connector, and improved analystic method about mechanical characters on interface is suggested.
결정질 실리콘 태양전지에 적용하기 위한 도금법으로 형성환 Ni/Cu 전극에 관한 연구
김범호(Kim, Bum-Ho),최준영(Choi, Jun-Young),이은주(Lee, Eun-Joo),이수홍(Lee, Soo-Hong) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. The Ni contact was formed on the front grid pattern by electroless plating followed by anneal ing at 380{sim}400?C for 15{sim}30 min at N_{2} gas to allow formation of a nickel-silicide in a tube furnace or a rapid thermal processing(RTP) chamber because nickel is transformed to NiSi at 380{sim}400?C. The Ni plating solution is composed of a mixture of NiCl_{2} as a main nickel source. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. The Ni/Cu contact was found to be well suited for high-efficiency solar cells and was successfully formed by using electroless plating and electroplating, which are more cost effective than vacuum evaporation. In this paper, we investigated low-cost Ni/Cu contact formation by electroless and electroplating for crystalline silicon solar cells.
주종미(Jong mi Joo),최준영(Jun Young Choi),문선호(Sun ho Mun) 한국스포츠산업경영학회 2004 한국스포츠산업경영학회지 Vol.9 No.1
시간의 연속선 상에서 어떤 사건이 하나의 변수에 미치는 영향력을 평가하기 위하여 우리는 주로 시계열 분석법 (Time Series Analysis)을 사용한다. 각기 나름대로의 장점을 지닌 여러 종류의 시계열분석법이 존재하고 있긴 하지만, 아직까지 모든 데이터 분석을 해결할 수 있는 최적의 시계열분석법이 존재한다고 말할 수 없는 상황이다. 그리고 이러한 상황은 어떠한 분석법을 사용하였느냐에 따라 연구결과가 달라질 수도 있는 가능성을 창출하였다. 이렇게 어떤 시계열분석법이 가장 우수한 방법론인지를 결정하기 위한 객관적인 기준이 없다는 사실로 미루어 볼 때, 특정 시계열방법을 가지고 찾아낸 경험적 발견을 다른 시계열방법으로 재차 테스트한다는 것은 그 경험적 발견이 얼마나 의미가 있는지 알아볼 수 있는 좋은 기회를 제공한다고 할 수 있다. 따라서 이 연구의 목적은 Schmidt와 Berri (2002)가 자기회기이동평균(Auto Regressive Moving Average - ARMA)이라는 방법을 가지고 찾아낸 미국 메이저리그 선수의 파업이 관중수에 미친 영향에 대한 경험적 발견을 다른 시계열분석법을 통해 재차 검증함으로써 그들의 발견이 얼마나 의미가 있는지를 확인하는데 놓여있다. 이 연구는 다중간섭시계열 (Multiple Interrupted Time Series - MITS)이라는 방법을 사용할 것인데, 자기회기이동평균 (ARMA) 보다 훨씬 간결하지만 그 설명력에 있어선 그다지 뒤쳐지지 않는 이 방법을 소개하는 것이 이 연구의 또 다른 목적이다. 이 연구에서 발견한 결과는 다음과 같다. 미국 메이저리그 선수노조의 파업은 일시적으로 야구 관객수를 감소시키긴 하였지만, 장기적으로 볼 때 관객수에 별 영향을 미치지 않는 것으로 나타났다. 이러한 결과는 자기회기이동평균 (ARMA)이라는 시계열분석법을 사용하여 본 연구와 똑같은 이슈를 검증하였던 Schmidt와 Berri의 연구와도 같은 결과를 도출한 것이다. 따라서 이 연구의 발견은 선수노조 파업이 일시적으로 야구 관객수를 감소시킨다는 사실을 보다 공고히 하였다는 의미를 지닌다. The purpose of this study is to introduce a readily accessible time series analysis. Multiple Interrupted Time Series (MITS), and to replicate, with this method. Schmidt and Berri (2002)'s findings that there is a direct link between the decrease in MLB fan attendance and the occurrence of strikes, at least in the short run. This study finds that strikes have only short-term, not long-term, impacts on MLB attendance and thereby enhance confidence in Schmidt and Berris findings. Since the MITS analysis produces the same results acquired by the much more complex Auto Regressive Moving Average (ARMA) analysis, with respect to assessing the impacts of strikes, it may be inferred that this study successfully demonstrates the usefulness of MITS analysis. It is believed that this study introduces a useful statistical tool for researchers whose interests are involved in longitudinal data.
단결정 실리콘 태양전지의 반사방지막에 적용하기 위한 다공성 실리콘에 대한 연구
김범호(Bum-ho Kim),최준영(Jun-young Choi),이은주(Eun-joo Lee),이수홍(Soo-hong Lee) 한국태양에너지학회 2007 한국태양에너지학회 학술대회논문집 Vol.- No.-
Silicon solar cell has optical losses, which can be reduced using texture structure and anti-reflection coatings. In general, texture structure is made by chemical etching or lithography process. But these are unsuitable for multi-crystalline silicon substrates because multi-crystalline silicon has not uniform orientation. Anti-reflection coating is made by vacuum equipments such as CVD, but the vacuum processing is very complicated and costly. It is well known that porous silicon acting as an anti-reflection coating reduces optical losses. Playing several roles like selective emitter and passivation as well as Anti-reflection coating in solar cells, porous silicon can be improved cell efficiency effectively. Porous silicon is formed by anodization and can be obtained in an electrolyte with hydrofluoric acid (HF-C₂H₅OH-H₂O) by two methods : electrochemical etching and chemical etching. In this paper, we produced porous silicon by electrochemical method.