http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Friction Characteristics of CNx Coated Dimple Pattern with Hexagonal Array
최원식,Choi, Won-Sik,Umehara, Noritsugu Korean Tribology Society 2011 한국윤활학회지(윤활학회지) Vol.15 No.3
In this study, we examined the friction characteristics of a dimple pattern on a carbon nitride coating. The study was conducted with a hexagonal array 40 ${\mu}m$ dimple pattern on a steel bearing containing a CNx coating. The area density of the dimple patterns were varied between 5% and 25%, the speed was varied from 0.06-0.26 m/s, and the load was varied between 20-100N. In general, we found that as the velocity increased, the friction coefficient increased. Furthermore, the friction coefficient was lowest at a load of 40N. The friction coefficient of the non-coated specimen was 0.025-0.15; on the other hand, the friction coefficient of the coated specimen was 0.002-0.02. Thus, we determined that the coated materials could reduce the friction coefficient by a factor of 7.5.
선박엔진의 Supply Unit용 SNCM420H의 절삭특성
최원식,성봉수,강창원,문희준,권주리,Choi, Won-Sik,Sung, Bong-Soo,Kang, Chang-Won,Mun, Hee-Joon,Kwon, Ju-Ri 한국생산제조학회 2010 한국생산제조학회지 Vol.25 No.5
SNCM420 steel is one of the cam shaft materials which are used in the supply unit for ship engine cam shaft. In this study the assessment of cutting behavior was conducted for the SNCM 420 steel and SM45C steel with various cutting conditions as depth of cut 0.5, 1.0, 1.5, 2.0mm and feed rate 0.1~0.3m/rev. The controlled chip was produced in feed rate 0.2, depth of cut 1.0 for SNCM420 and feed rate 0.2, depth of cut 2.0 for SM45C. There is no difference cutting force between SM45C and SNCM420 steels.
최원식,프라타마 판두 산디,수페노 데스티아니,변재영,이은숙,우지희,양지웅,키프 디마스 하리스 신,크리스타 마이난다 브리기타,오케추쿠 나에메카 니콜라스,이강삼,Choi, Wonsik,Pratama, Pandu Sandi,Supeno, Destiani,Byun, Jaeyoung,Lee, Ensuk,Woo, Jihee,Yang, Jiung,Keefe, Dimas The Korean Society of Industry Convergence 2018 한국산업융합학회 논문집 Vol.21 No.5
In this research, the effect of normal load, sliding velocity, and texture density on thefriction coefficient of surfaces micro-textured on AISI 4140 under paraffin oil lubrication were investigated. The predicted tribological behavior by numerical calculation can be serves as guidance for the designer during the machine development stage. Therefore, in this research friction coefficient prediction model based on response surface methodology (RSM), support vector machine (SVM), and artificial neural network (ANN) were developed. The experimental result shows that the variation of load, speed and texture density were influence the friction coefficient. The RSM, ANN and SVM model was successfully developed based on the experimental data. The ANN model can effectively predict the tribological characteristics of micro-textured AISI 4140 in paraffin oil lubrication condition compare to RSM and SVM.
한국산 옻나무로부터 추출.분리한 생리활성 물질들의 항산화 효과 및 세포독성
최원식,김동길,이영행,김장억,이성은,Choi, Won-Sik,Kim, Dong-Kil,Lee, Young-Haeng,Kim, Jang-Eok,Lee, Sung-Eun 한국응용생명화학회 2002 한국농화학회지 Vol.45 No.3
한국산 옻나무의 메탄올추출물과 유기용매 분획의 항산화 효과를 조사하였다. 항산화 효과는 수소공여 억제능, 과산화지질 형성 억제능, xanthine oxidase저해 활성과 아질산염 소거능으로 측정한 결과, ethyl acetate 분획이 가장 뛰어난 효과를 나타내었다. 이 분획의 생리활성 물질을 분리하기 위하여, rotatory locular counter current chromatography(RLCCC), Sephadex LH-20 column chromatograpy와 HPLC등의 방법을 사용하여, 1,2,3-trihydroxybenzene, methyl 3,4,5-trihydroxybenzoat와 3,4,5-trihydroxybenzoic acid를 분리하였다. 이중 methyl 3,4,5-trihydroxybenzoate는 butylated hydroxyanisole(BHA)이나 butylated hydroxytoluene(BHT)보다도 강한 항산화 효과를 나타내었다. 그러나 세포독성 실험에서는 이들 물질들이 암세포주에 대하여 활성이 높지 않았다. 이상의 결과로 methyl 3,4,5-trihydroxybenzoate은 뛰어난 항산화 효과를 지닌 식품첨가물로서의 이용 가능성을 제시할 수 있다. Antioxidative activities of solvent fractions obtained from Korean Rhus vernicifera, being used in food industry and as a traditional medicine, were examined by the methods of DPPH scavenging activity, inhibitory effect on autooxidation of linoleic acid, nitrite scavenging activity and the inhibitory effect on xanthine oxidase activity. Ethyl acetate fraction showed potent antioxidative activities. Three compounds were isolated from the ethyl acetate fraction by rotatory locular counter current chromatography (RLCCC), Sephadex LH-20 column chromatography and HPLC. The isolated compounds were 1,2,3-trihydroxybezene, methyl 3,4,5-trihydroxybenzoate and 3,4,5-trihydroxybenzoic acid determined by GC/MS and, $^1H$ and $^{13}C$ NMR. Among the isolated compounds, methyl 3,4,5-trihydroxybenzoate showed the strongest antioxidative activity than artificial antioxidants, BHA and BHT in various methods. However, these isolated compounds did not show cytotoxicity effects on the human cancer cell lines. Therefore, we may suggest that methyl 3,4,5-trihydroxybenzoate can be used as a food additive possessing the potent antioxidative activity.
6${\beta}$-Bromopenicillanate로부터 6-(Carboxymethylthio) penicillanic Acid 유도체의 합성
최원식,이영행,이채호,Won-Sik Choi,Young-Haeng Lee,Chai-Ho Lee 대한화학회 1991 대한화학회지 Vol.35 No.5
6${\beta}$-bromopenicillanic acid(4a)와 p-nitrobenzylbromide, 3-bromophthalide, chloromethylpivalate 및 1-chlorodiethylcarbonate의 반응으로 6${\beta}$-bromopenicillanates(4b~4e)을 합성하였으며, 6${\beta}$-bromopenicillanic acid(4a)와 그의 ester(4b~4e)를 thioglycolic acid와 친핵성 치환반응시켜 새로운 $\beta$-lactam계 화합물인 6-(carboxymethylthio)penicillanic acid(5a)와 그의 ester(5b~5e)를 얻었다. Reaction of 6${\beta}$-bromopenicillanic acid(4a) with p-nitrobenzylbromide, 3-bromophthalide, chloromethylpivalate and 1-chlorodiethylcarbonate afforded 6${\beta}$-bromopenicillanates(4b~4e). New ${\beta}$-lactam compound, 6-(carboxymethylthio)penicillanic acid(5a) and the other esters(5b~5e) were prepared by nucleophilic substitution reaction of 6${\beta}$-bromopenicillanic acid(4a) and the other esters(4b~4e) with thioglycolic acid.
Tribological Characteristics in $40{\mu}m$ Dimple Pattern for Hexagonal Array
최원식,채영훈,Choi, Won-Sik,Chae, Young-Hoon,Umehara, Noritsugu Korean Tribology Society 2009 한국트라이볼로지학회지 (Tribol. Lubr.) Vol.17 No.5
본 연구에서는 pin-on-disk 마찰 시험기를 통하여 Hexagonal 배열 $40{\mu}m$ Dimple 패턴의 효과를 실험하였다. 마찰 실험은 미끄럼 속도가 $0.06{\sim}0.34m/s$로 하였으며 마찰하중은 $20{\sim}100\;N$의 범위로 하였고, Dimple의 밀도는 $10{\sim}25%$의 범위로 제작하여 실험을 행하였다. 일반적으로 속도가 증가하고 하중이 감소할수록 마찰계수는 감소하는 경향을 나타내었으며, Dimple에 의한 마찰저감 효과는 속도가 $0.14{\sim}0.26m/s$의 범위에서 나타났다. $40{\mu}m$ Hexagonal 배열 Dimple 패턴의 마찰 특성에서는 밀도가 12.5%에서 가장 좋은 경향을 나타내었다.
근대계몽기 문예운동의 시각 ; 1910 년대 친일문학과 근대성 - 최찬식 (崔瓚植)
최원식(Won Shik Choi) 민족문학사학회·민족문학사연구소 1999 민족문학사연구 Vol.14 No.-
Choi Chan-sik(1881∼1951), one of the major writers of 1910`s, succeeded Lee In-jik(1862∼1917) who as a pro-japanese had played an active part in politics and literature in the period of patriotic enlightment(1905∼10). Unlike Lee who was subjectively pursued how to adapt himself to new colonial circumstances, Choi was objectively situated in the colonial life and was to find out modernity in the new way. In his work, through the simulation of various marriages, Choi experimented the making of the colonial modern based on the disintegration of traditional society. But modernity of his literature was limited to surface level because of the lack of tension toward Captial. So, after the brief heyday, he and his literature fell to the ground abruptly
주조용 White베어링메탈의 Bonding strength에 관한 연구
최원식(W.S.Choi),박대영(D.Y.Park),신미정(M.J Sin),최선미(S.M Choi),이창주(C.J Lee),김민규(M.K Kim) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 원심주조법을 사용하여 주조용 White metal의 Bonding strength에 관한 연구와 Ansys를 이용하여 주조시 최적의 주조 방법에 대해 연구하고자 한다.
최원식(Choi W. S),남중희(Nam J. H),손재환(Son J. H),이인(Lee Ihn),문희준(Mun H. J),권주리(Kwon J. R) 한국생산제조학회 2009 한국공작기계학회 추계학술대회논문집 Vol.2009 No.-
We have introduced the development for the manufacturing of the transmission helical gear in automobile in the future. The forging production of the helical gear for transmission was very useful to reduce the cost down and increase the life cycle than machining the gear as gear hobbing and turning. As result the simulation for the forging process by the computer, the temperature increase in lower pressure, the pressure lower in lower velocity in analysis the SCr420H steel. Also we had known as total reduction cost was up to 30% compare the machining the gear.