AMOLED 제조공정에 사용되는 Fine Metal Mask 용 얇은 Invar 합금의 진동자를 이용한 펨토초 레이저 응용 홀 드릴링

최원석,김훈영,신영관,최준하,장원석,김재구,조성학,최두선,Choi, Won-Suk,Kim, Hoon-Young,Shin, Young-Gwan,Choi, Jun-ha,Chang, Won-Seok,Kim, Jae-Gu,Cho, Sung-Hak,Choi, Doo-Sun 한국금형공학회 2020 한국금형공학회지 Vol.14 No.3

One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.

극초단 펄스 레이저를 사용한 유리 내부의 필라멘테이션에 대한 실험적 연구

최원석,윤지욱,김주한,최지연,장원석,김재구,최두선,황경현,조성학,Choi, Won-Suk,Yoon, Ji-Wook,Kim, Joohan,Choi, Jiyeon,Chang, Won-Seok,Kim, Jae-Goo,Choi, Doo-Sun,Whang, Kyoung Hyun,Cho, Sung-Hak 한국레이저가공학회 2013 한국레이저가공학회지 Vol.16 No.1

We have successfully formed filament inside of a transparent soda-lime glass using a Ti:sapphire based femtosecond laser. To make filament form, keeping the laser intensity higher than critical intensity is essential. Also each of the machining parameters plays an important role for the formation of filament. In this paper, we study what parameter can possibly influence for formation of filament, and we introduce an application using filamentation by femtosecond laser for transparent material.

최한기의 기학적 지리학과 지리연구방법론

최원석(Won Suk Choi) 한국지역지리학회 2009 한국지역지리학회지 Vol.15 No.1

Sensitiv Imago^TM 측정에 의한 야뇨증 환아의 검사 결과 보고

최원석,김덕곤,이진용,Choi, Won Seok,Kim, Deog Gon,Lee, Jin Yong 대한한방소아과학회 2014 대한한방소아과학회지 Vol.28 No.4

Objectives The purpose of this study is to report the nocturnal enuresis in children using Sensitiv $Imago^{TM}$. Methods Twenty nocturnal enuresis children were tested using Sensitiv $Imago^{TM}$. Results 10 cases showed the lowest score at filter $#5^*$ and 7 cases showed the lowest score at filter $6^*$ in {Express Monitoring} of {Review of System Disorders of Homeostasis}. Conclusions Further study with more samples is necessary to establish the accuracy of Sensitiv $Imago^{TM}$.

훈연공정을 첨가하여 제조한 발아콩 청국장의 품질특성

최원석,박화영,최웅규,Choi, Won-Seok,Park, Hwa-Young,Choi, Ung-Kyu 한국식품영양학회 2015 韓國食品營養學會誌 Vol.28 No.3

The aim of this study is to investigate the changes in the quality characteristics of cheonggukjang made with germinated soybeans, which is produced by the addition of a smoking process. The L value of smoked cheonggukjang made with germinated soybeans (SCGS) was higher than that of non-smoked cheonggukjang made with non-germinated soybeans (NCNS) and non-smoked cheonggukjang made with germinated soybeans (NCGS). The a value of NCNS was the highest, followed by NCGS and SCGS. The b and ${\Delta}T$ values had a similar tendency compared with the L value. The amino acids in NCGS were significantly decreased compared with NCNS, whereas no remarkable difference in amino acid content was observed between NCGS and SCGS. The moisture content of NCGS ($61.9{\pm}0.9%$) was increased by more than 8% compared with that of NCNS ($53.3{\pm}0.7%$). The moisture content of SCGS was significantly decreased compared with NCGS, whereas the moisture content of SCGS was higher than that of NCNS. The pH of SCGS was significantly the highest, followed by NCGS and NCNS. The viscous substance content of NCGS was significantly increased compared with that of NCNS. No remarkable difference in viscous substance content was observed between NCGS and SCGS. The number of aerobic bacteria in SCGS was significantly decreased compared with NCGS. The levels of total isoflavone in NCNS, NCGS, and SCGS were $1,573.9{\pm}62.5$, $1,759.1{\pm}65.8$, $1,738.0{\pm}68.1mg%$, respectively.

공막연화증에서 조직접합제를 이용한 공막이식술, 자유자가결막이식술 및 일시적 양막이식술

최원석,이광자,박영정,이규원,Won Suk Choi,Gwang Ja Lee,Young Jeung Park,Kyoo Won Lee 대한안과학회 2011 대한안과학회지 Vol.52 No.12

Purpose: To evaluate the surgical results and complications arising from scleral graft and free conjunctival autograft using tissue adhesive and temporary amniotic membrane transplantation as the surgical treatment for scleromalacia. Methods: Scleral graft and free conjunctival autograft using tissue adhesive and temporary amniotic membrane transplantation was performed in 20 eyes of 20 patients with scleromalacia caused by pterygium excision. The surgical results and complications arising from the procedure were monitored and analyzed through follow-up. Results: During the follow-up period of 17.6 ± 5.9 months, the wound injection and edema at the free conjunctival autograft and operation site healed in all the cases except 1 at postoperative 1 month. The stability of the ocular surface for graft transplantation was maintained at postoperative 3 months. Although a partial absorption of the conjunctival autograft induced by careless treatment occurred 2 weeks postoperative in 1 case, the ocular surface stabilized due to suitable treatment after 6 months. Although the edges of the scleral graft in 3 patients were partially absorbed 6 months postoperatively, the ocular surface stability was maintained by covering the conjunctival autografts. Conclusions: For scleromalacia patients, scleral graft and free conjunctival autograft using tissue adhesive and temporary amniotic membrane transplantation rapidly stabilized the ocular surface and presented excellent aesthetic results. J Korean Ophthalmol Soc 2011;52(12):1405-1413

심장 치료 전후의 혈압 측정 인자의 변화에 관한 연구

최원석,Choi, Wonsuk 한국융합신호처리학회 2021 융합신호처리학회 논문지 (JISPS) Vol.22 No.2

상완 수축기 혈압과 맥압은 50세 이상의 개인에서 심혈관 질환의 예측 인자이다. 강성이 증가함에 따라 수축기 후기의 반사 진폭과 압력이 증가하여 좌심실 부하와 심근 산소 요구량이 증가한다. 따라서 강성이 혈압에 미치는 영향을 연구 할 필요가 있다. 본 연구에서는 약물 복용 전후에 혈압 맥파를 측정하고, 심부전 환자에서 심근 심장 이식 전후에 혈압 맥파를 측정하였다. Windkessel 모델의 R, L 및 C 구성 요소 간의 상관관계는 혈압을 높임으로써 추정되었다. 커브 피팅 방법을 사용하여 Windkessel 모델의 매개 변수를 모델링 한 결과 혈압의 증가와 수축기 상승 시간의 감소는 RLC Windkessel 모델의 L 성분이 증가했기 때문이다. 혈관의 다양한 기계적 특성 중에 높은 BP 파형에 영향을 미치는 가장 중요한 매개 변수는 실험결과로 이너턴스인 것을 증명하였다. The brachial systolic blood pressure and pulse pressure are the predictors of cardiovascular disease in individuals over 50 years of age. As the stiffness increases, the reflex amplitude and pressure in the late systole increase, resulting in an increase in left ventricular load and myocardial oxygen demand. Therefore, it is necessary to study how stiffness affects blood pressure. In this study, the blood pressure pulse waves were measured before and after taking the drug, and the blood pressure pulse wave was measured before and after myocardial heart transplantation in patients with heart failure. The correlation between R, L, and C components of the Windkessel model was estimated by increasing blood pressure. As a result of modeling the parameters of the Windkessel model using the curve fitting method, the increase in blood pressure and decrease in systolic rise time were due to the increase in the L component in the RLC Windkessel model. Among the various mechanical characteristics of blood vessels, the most important parameter affecting high BP waveform is the inertance.

파프리카 온실에서 담배가루이의 축차표본조사법 개발

최원석,박정준,Choi, Wonseok,Park, Jung-Joon 한국응용곤충학회 2015 한국응용곤충학회지 Vol.54 No.3

파프리카(Capsicum annuum var. angulosum)의 주요해충인 담배가루이(Bemisia tabaci)의 고정 정확도 수준에서 표본조사법(Fixedprecision sampling plan)을 개발하였다. 개발된 표본 조사법은 파프리카 온실의 담배가루이 방제체계 확립을 위해 공간분포분석, 표본추출 정시선 그리고 의사결정법으로 이루어 졌다. 자료 수집은 식물체를 상단(지상으로부터 180-220 cm), 중단(지상으로부터 80-120 cm), 하단(지상으로부터 30-70 cm)로 나누어 각 위치별 3개의 파프리카 잎에서 담배가루이 성충, 번데기를 관찰하고 그 총 수를 기록하였다. 담배가루이 성충은 식물체의 상부에서 움직이고 신초에 주로 산란하며 일정부분이 하단으로 내려오기 때문에 상단과 하단에 많이 분포하였으며, 번데기의 경우 상부에 알을 낳았지만 식물체가 크면서 알을 낳은 잎이 아랫부분이 되고 부화한 유충은 잎 뒤에 고착 상태로 우화까지 움직임이 거의 없기 때문에 중단과 하단에서 많이 분포하였다. 공간분포분석은 Taylor's power law (TPL)를 이용하였으며, TPL계수의 차이를 공분산분석(ANCOVA)하여 차이가 없는 경우 자료를 통합하여 계산된 새 TPL 상수값을 이용하여 표본추출 정시선을 구하였다. 그리고 담배가루이 성충과 번데기의 방제밀도수준을 2.0마리와 10.0마리로 설정하여 방제의사를 결정하였다. 마지막으로 분석에 사용하지 않은 독립된 자료를 이용하여 개발된 표본추출법의 유효성을 Resampling Validation for Sampling Plan (RVSP) 프로그램으로 평가한 결과 적합한 정확도를 보였다. In order to establish B. tabaci control in paprika greenhouses a fixed-precision-level sampling plan was developed. The sampling plan consisted of spatial distribution analysis, a sampling stop line, and decision making. Sampling was conducted simultaneously in two independent greenhouses (GH 1, GH 2). GH 1 and 2 were surveyed every week for 22 consecutive weeks, using 19 sampling locations in GH 1 and 9 sampling locations in GH 2. The plant in both greenhouses were divided into top (180-220 cm from the ground), middle (80-120 cm from the ground) and bottom (30-70 cm from the ground) sections and B. tabaci adults and pupae were observed on three paprika leaves at each position and recorded separately. GH 2 data were used to validate the fixed-precision sampling plan, which was developed using GH 1 data. In this study, spatial distribution analysis was performed using Taylor's power law with the pooled data of the top and bottom position (B. tabaci adults), and the middle and bottom positions (B. tabaci pupae), based on a 1-leaf sampling unit. Decision making was undertaken using the maximum of action threshold in accordance with previously published method, and the value was decided by the price of the plants. Using the results obtained in the greenhouse, simulated validation of the developed sampling plan by RVSP (Resampling Validation for Sampling Plan) indicated a reasonable level of precision.

장기숙성 한식간장의 숙성 기간별 품질 특성 비교

최원석,이난희,최웅규,Choi, Won-Seok,Lee, Nan-Hee,Choi, Ung-Kyu 한국식품영양학회 2019 韓國食品營養學會誌 Vol.32 No.5

In this study, the quality characteristics of 30 kinds of long-term matured soy sauce collected from all over Korea classified according to ripening period were analyzed. The longer the soy sauce had to matured, the closer the pH was to neutrality. Acidity decreased as the ripening period increased. Total nitrogen and amino nitrogen content increased as the soy sauce matured. Moisture content decreased with the increasing soy sauce ripening period, and the content of pure extracts increased in proportion to the ripening period. The numbers of bacteria, fungi, and yeast increased in proportion to the maturation period. The content of P was highest in all soy sauce analyzed, followed by K, Ca, Mg, Fe and Zn. Mg and Ca contents decreased with maturing, whereas K increased with maturing.

산소 분압에 따라 전자빔 증착법으로 제작된 TiO₂ 박막의 구조적.광학적 특성

최원석,김장섭,정종민,한성홍,김의정,이충우,주종현,Choi, Won-Seok,Kim, Jang-Seob,Jung, Jong-Min,Hahn, Sung-Hong,Kim, Eui-Jung,Lee, Chung-Woo,Joo, Jong-Hyun 한국광학회 2007 한국광학회지 Vol.18 No.2

전자빔 증착법을 이용하여 산소 분압에 따라 $TiO_2$ 박막을 제작하고, 열처리 온도에 따른 박막의 구조적 특성과 광학적 특성을 분석 하였다. $TiO_2$ 박막들의 물리적 특성은 주입된 산소량에 의존하였다. 주입된 산소량이 증가 할수록 상전이 온도가 높아지고, 가시광선 영역에서 $TiO_2$ 박막의 투과율이 증가하였다. 그리고 주입된 산소량이 작은 경우, $700^{\circ}C$에서 $1100^{\circ}C$로 열처리 후 $TiO_2$ 박막의 흡수단 이 좀더 장파장으로 이동하였다. We prepared $TiO_2$ thin films by electron-beam evaporation at various oxygen pressures, and investigated their optical and structural properties as a function of the annealing temperature. The physical properties of the $TiO_2$ thin films depend upon the injection oxygen content. With the increased injection of oxygen, the phase transformation temperature and the transmittance of $TiO_2$ thin films in the range of visible wavelength were increased. For low injection of oxygen, the absorption edges of $TiO_2$ thin films were more red-shifted when annealed at temperatures from $700^{\circ}C$ to $1100^{\circ}C$.