http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최용근(Yong-Kun Choi),이정인(Chung-In Lee),이정상(Jeong-Sang Lee),김장순(Jang-Soon Kim) 한국암반공학회 2004 터널과지하공간 Vol.14 No.5
벤치발파에서 암석 파쇄도 예측은 생산계획을 수립하는 데 있어서 가장 중요한 요소 중의 하나이다. Kuz-Ram 모델은 지금까지 제안된 암석 파쇄도 예측 모델 중 가창 우수한 것으로 평가받고 있으나, 이 모델의 평가항목을 구성하고 있는 절리조건, 암석강도, 밀도, 사용폭약의 성능과 저항선, 공간격 등의 요소들은 그 값을 선정하는 과정에서 주관적인 요소가 개입되거나 정의가 모호한 요소를 포함하고 있다. 이 연구에서는 Kuz-Ram 모델을 구성하는 여러 평가항목의 값을 선정하는 과정에서 주관적이거나 모호한 요소를 제거하는 방법에 대해 검토하였으며, 예측값을 현장조사 결과와 비교하여 적용성을 검토하였다. Kuz-Ram 모델은 비교적 정확한 예측결과를 보였으나, 현지암반 조건을 충분히 반영하지 못하여 개선이 필요한 것으로 판단되었다. Prediction of fragmentation in bench blasting is one of the most important factors to establish the production plan. It is widely accepted that fragmentation could be accurately predicted using the Kuz-Ram model in bench blasting. Nevertheless, the model has an ambiguous or subjective aspect in evaluating the model parameters such as joint condition, rock strength, density, burden, explosive strength and spacing. This study proposes a new method to evaluate the parameters of Kuz-Ram model, and the predicted mean fragment sizes using the proposed method are examined by comparing the measured sizes in the field. The results show that the predictions using Kuz-Ram model with the proposed method coincide with field measurements, but Kuz-Ram model does not reflect the in-situ rock condition and hence needs to be improved.
정용훈(Jong, Yong-Hun),이정인(Lee, Chung-In),최용근(Choi, Yong-Kun) 한국소음진동공학회 2006 한국소음진동공학회 논문집 Vol.16 No.1
The test blasts were carried out by detonating some single blastholes at two upper sites of the underground storage cavern for the crude oil. One was performed at the entrance site of the construction tunnel and the other at the middle area of the underground storage cavern. Based on the blast-induced nitration measured by the test blasts, we suggested the propagation equations of blasting vibration that were capable of estimating the peak particle velocity. In addition, in order to assess the stability of the adjacent ground storage tank, we did the frequency analysis and the response spectrum analysis with the particle velocity-time history and the particle acceleration-time history that were measured by the test blast carried out on the entrance site of the construction tunnel. In result, it was predicted that the displacement on the highest part of the tank shell was less than the allowable displacement.
서울 중심부 편마암 분포지역 저심도 구간의 암반 초기응력 분포특성 연구
배성호,전석원,최용근,김재민,Bae, Seong-ho,Jeon, Seok-won,Choi, Yong-Kun,Kim, Jae-min 한국터널지하공간학회 2003 터널기술 Vol.5 No.2
90년대 이후 지하 암반 구조물의 수요가 증가함에 따라 시공 전 설계 단계에서 요구되는 암반내 초기응력에 대한 정량적 정보를 얻기 위해 현장 초기 응력 측정이 광범위하게 수행되고 있다. 제안된 여러 측정법들 중 현장 적용성 면에서 큰 장점을 가진 수압파쇄법이 국내에서는 대표적으로 적용되고 있다. 본 논문에서는 평탄한 지형조건으로 이루어진 서울 중심부 편마암 지역내 저심도 구간의 11개 시추공을 대상으로 수압파쇄법에 의해 구해진 초기응력 측정자료와 수평응력의 크기, 방향성과 심도별 변화 그리고 측압계수 분포 등 과업구간 암반 내 초기응력장의 제반 분포 특성에 대해 논의하고자 한다. Since early in the 90's, as the need for construction of underground rock structures has been largely increased, the in-situ rock stress measurement has been widely carried out to provide the quantitative information on the initial stress state of test site at the design stage of underground rock structures. Among the diverse method developed for measuring rock stress, hydraulic fracturing method is most popularly used because it is applicable at pre-construction stage and has no limit in testing depth. In this paper a study on initial rock stress state at shallow depth of the plain gneiss region in the central part of Seoul was performed on the basis of the in-situ hydraulic fracturing stress measurement results from the 11 test boreholes. And overall characteristics of the initial stress field of the study area are discussed.
수압파쇄시험에 의한 산악지역에서의 현지 암반 초기응력 측정 및 분포특성 연구
배성호,전석원,최용근,김학수,Bae, Seong-ho,Jeon, Seok-won,Choi, yong-kun,Kim, Hak-soo 한국터널지하공간학회 2002 터널기술 Vol.4 No.1
국토의 65 % 이상이 산악으로 구성된 이유로 90년대 이후 산악지형의 암반을 대상으로 한 대규모 교통터널, 에너지 비축시설 및 산업용 저장소와 같은 대형 토목구조물의 필요성이 크게 증가하고 있다. 암반내 시공되는 토목 구조물의 설계과정에서 현지 암반의 초기응력장에 대한 정량적인 자료가 주요한 핵심요소로 작용하며 이러한 초기응력장에 대한 제반 정보를 획득하기 위한 목적으로 국내에서는 정밀 지반조사 과정에서 수압파쇄법이 대표적으로 사용되고 있다, 본 논문에서는 국내 각지의 산악지형에서 얻어진 수압파쇄시험 현장 측정 자료들에 대한 해석결과를 바탕으로 국내 산악지형의 암반내 초기응력 분포 특성에 대한 분석을 수행하였다. Since early in the 90's, the need for construction of underground rock structures such as long and large section traffic tunnel, energy storage cavern, industrial facility, etc. has been largely increased because the Korean territory is not wide and about 65 % of the land consists of mountainous region. The initial rock stress measurement has been widely conducted to provide the quantitative information on the stress state of engineering site at the design stage of underground rock structures. Among the diverse methods developed for measuring rock stress, hydraulic fracturing test is most popularly used because it is applicable at pre-construction stage and has no limit in testing depth. In this paper, the characteristics of initial rock stress state in mountainous region were studied on the basis of the in-situ hydraulic fracturing stress measurement results from the 60 test boreholes in various parts of Korea.
제어발파의 설계 및 관리 과정에서의 PPV와 PVS의 역할
최병희 ( Byung Hee Choi ),류창하 ( Chang Ha Ryu ),황현주 ( Hyun Joo Hwang ),최용근 ( Yong Kun Choi ),안명석 ( Myung Seog Ahn ) 대한화약발파공학회 2008 화약발파 Vol.26 No.2
우리나라에서는 제어발파와 관련된 대부분의 시방서 등에서 허용기준을 `입자속도`로만 규정하고 PPV나 PVS의 세부적인 잣대로는 구분하지 않고 있다. 그 결과, 이 `입자속도`는 PPV나 PVS 등의 어느 쪽으로든 해석이 가능하게 됨으로써 이들을 모두 고려하는 우리나라 특유의 관습적인 방법이 생겨나게 되었다. 원래 PPV나 PVS 등은 지반진동과 구조물 손상과의 인과관계에 대한 연구결과로부터 제안된 것으로, 일반적으로는 이들 가운데 어느 하나를 허용수준(허용치)의 잣대로 선택하여 사용함으로 우리나라의 관습적인 방법과 대비된다. 이런 맥락에서 본 논문에서는 제어발파의 설계 및 관리에 관한 기본개념을 허용기준을 중심으로 고찰함으로써 PPV나 PVS 가운데 어느 하나를 잣대로 사용하는 `일반적인 방법`과 양자를 모두 사용하는 `관습적인 방법`을 서로 비교해 보았다. 그 결과, 관습적인 방법은 허용수준을 설정하기에 따라 일반적인 방법과 다를 바가 없음에도 방법의 적용이 복잡하고, 잣대가 수시로 바뀌어 혼란의 소지가 높은 것으로 나타났다. 사실 관습적인 방법은 여러 가지 영향요소를 고려해야 하는 연구단계에서는 필요한 방법이지만 현장적용 단계에 들어가서는 `일반적인 방법`에 비해 단점은 있어도 장점은 발견하기 어렵다. 따라서 앞으로는 간편하고 합리적인 제어발파 방법으로서 `일반적인 방법`을 사용하는 것이 바람직할 것으로 판단된다. The safe level for residential structures has usually been prescribed as just `particle velocity` in various specifications in Korea. It implies that there is a possibility of interpreting the `particle velocity` as the PPV (Peak Particle Velocity), PVS (Peak Vector Sum), or something else, depending on the interpreter. As a result, there have always been some difficulties in both designing a controlled blasting and controling the blast-induced ground vibrations. This paper is intended to show what the role of the safe level criteria such as PPV or PVS is, and also how we should use the concept of the scaled distance equation in a controlled blast design. The paper also emphasizes the importance of the allowable level for various residential structures and its uses in each stage of the controlled blast design.