http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
열압 성형법에 의한 폐목재-플라스틱 복합패널의 기초적 성질
최낙운(Nak-Woon Choi),문경주(Kyoung-Ju Mun),최산호(San-Ho Choi) 유기성자원학회 2004 유기물자원화 Vol.12 No.4
본 연구에서는 가연성 건설폐기물 재활용의 일환으로, 폐발포폴리스티렌의 스티렌 용액에 가교제 및 개시제를 첨가하여 제조한 결합재와, 폐목재 칩을 이용하여, 폐목재-플라스틱 복합패널을 제조하였다. 전열프레스를 이용하여 다양한 결합재량 및 충전재-결합재 비를 갖는 복합패널 공시체를 제조하였으며, 그 겉보기 밀도, 흡수율, 흡수에 의한 팽창률, 휨강도, 내수성 등에 관한 일련의 실험을 행하였다. 폐목재-플라스틱 복합패널의 겉보기밀도는 결합재량 및 충전재-결합재비의 증가에 따라 증대하며, 그 휨강도 및 습윤 휨강도는, 결합재량 35%, 충전재-결합재비 0.8에 있어서 최대치에 이른다. 흡수율 및 흡수에 의한 두께 팽창률은, 결합재량 및 충전재-결합재비의 증가에 따라 현저하게 감소한다. 결합재량 30%이상의 경우, 충전재 -결합재비에 관계없이, 복합패널의 24h 상온 수중(20℃) 침지 및 2h 끓는 물중(100℃)+1h상온 수중(20℃) 침지에 의한 휨강도의 감소는 거의 발생하지 않으며, 높은 내수성을 발현한다 A styrene solution of waste expanded polystyrene with a crosslinking agent and an initiator was used as a binder for waste wood-plastic composite panels. The waste wood-plastic composite panels are prepared with various binder contents and filler-binder ratios by using a hot press molding method. The apparent density of the composite panels is increased with increasing binder content and filler-binder ratio, while their water absorption and expansion in thickness are decreased with increasing binder content and filler-binder ratio. The maximum flexural strength and wet flexural strength of the composite panels are obtained at a binder content of 35% and a filler-binder ratio of 0.8. Decreases in the flexural strengths of the composite panels due to water immersion at 20 and 100℃ are hardly recognized at binder contents of 30% or more
非相溶形 收縮低減劑를 혼입한 폴리에스테르 모르타르의 硬化收縮 擧動
최낙운(Choi Nak-Woon),송훈(Song Hun),조영국(Jo Young-Kug),소양섭(Soh Yang-Seob) 대한건축학회 2003 大韓建築學會論文集 : 構造系 Vol.19 No.12
The setting shrinkage behavior in polyester mortars with two-phase shrinkage reducing agent(SRA) was observed at the ambient temperature. Polyester mortars were prepared with various styrene contents and SRA contents. The length change and exotherm temperature of polyester mortars were continuously monitored by a noncontact-type automatic length change measuring apparatus and a thermocouple embedded respectively. Low-shrinkage or non-shrinkage of polyester mortars should be accomplished by adjusting styrene content and SRA content, and the mechanism of low setting shrinkage behavior in polyester mortars with two-phase SRA could be explained by using a gradual model.