http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
피페리딘형 구조유도분자를 이용한 알루미노실리케이트 제올라이트의 합성 및 특성 연구
조성준 ( Sung June Cho ),김수현 ( Su Hyun Kim ),박성준 ( Sung Jun Park ),신나라 ( Na Ra Shin ) 한국화학공학회 2013 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.51 No.2
Zeolites with different structures were synthesized from the hydrothermal synthesis condition employing simple structure directing agent (SDA) containing piperidine moiety. The gel containing 1.0SiO2:0.9SDA:0.062NaAlO2: 0.217NaOH:20H2O was subject to hydrothermal synthesis at 413~453 K for 7 days. FER type zeolite was obtained at 433 K when piperidine was employed as SDA, whereas TON and MFI type zeolites were also obtained at 433 K when 2,6-dimethylpiperidine and 2,2,6,6-tetramethylpiperidine were used, respectively. Further increase of hydrothermal synthesis temperature to 453 K resulted in the formation of TON type zeolite when 2-mtheylpiperidine was used. The structural analysis of powder X ray diffraction pattern over FER type zeolite suggested that the SDA, piperidine interacted intimately with the zeolite where it located close to the framework
김영길,이재의,조성준,유룡 ( Young Kil Kim,Jae Eui Yie,Sung June Cho,Ryong Ryoo ) 한국공업화학회 1994 공업화학 Vol.5 No.5
Ru/γ-Al₂O₃와 Ru/CeO₂-γ-Al₂O₃를 사용하여 Ru담지 촉매의 반응성과 열적노화현상에 미치는 Ce의 영향을 연구하였다. ^(129)Xe-NMR과 수소흡착법을 사용하여 촉매특성을 검토하였으며, 모사 자동차 배기가스를 사용하여 과농, 양론 및 희박조건에서의 CO, HC 및 NO_x 전환율을 측정하였다. 새촉매와 노화촉매 모두 Ru/CeO₂-γ-Al₂O₃가 Ru/γ-Al₂O₃보다 세 가지 오염물질에 대한 전환율이 높았다. ^(129)Xe-NMR과 수소흡착에 의하면 Ce을 첨가하여도 열적노화현상을 억제할 수 없었다. 그러나 673K에서 열적노화시킨 경우 Ru/γ-Al₂O₃의 반응성은 새 촉매보다 작았으나 Ru/CeO₂-γ-Al₂O₃의 반응성은 오히려 컸다. 이것은 열적 노화과정에서 Ru/Ce 사이의 계면에 아마도 새로운 활성점이 만들어지기 때문이 아닌가 사료된다. 또한, Ru금속에 미치는 Ce같은 양이온 효과를 좀더 정량적으로 구하기 위하여 Ca, Ba, La, Y, Ce 등의 양이온을 교환한 Y-제올라이트에 Ru을 담지시킨 모델 촉매의 열적노화 정도를 ^(129)Xe-NMR과 EXAFS로 연구한 결과 이들 양이온이 Ru의 열적 노화성에 거의 영향을 미치지 못하는 것을 관찰하였다. Effects of ceria additive on the activity and thermal aging behavior of supported Ru catalysts were investigated using Ru/γ-Al₂O₃ and Ru/CeO₂-γ-Al₂O₃. The catalysts were characterized by ^(129)Xe-NMR and H₂ chemisorption. The cataltic activity for conversion of CO, HC and NO_x was measured using simulated automobile engine exhausts under lean, rich and stoichiometric conditions. For both fresh and aged catalysts, Ru/CeO₂-γ-Al₂O₃ was more active than Ru/γ-Al₂O₃ for all three pollutants. Results of 129 Xe-NMR and H₂ chemisorption indicated that sintering of Ru particles occurred to the same extent for both catalysts during the thermal aging process. After thermal aging at 673K, however, the catalytic activity of the aged Ru/CeO₂-γ-Al₂O₃ was substantially higher than that of the fresh one, while the activity of Ru/γ-Al₂O₃ decreased after the thermal aging. This finding may suggest new active sites were created during the thermal aging, probably in the vicinity of the interface between Ru and Ce. For more quantitative investigation of the effect of a cation such as Ce on the thermal aging of Ru metal particles, Ru catalysts supported on cation-exchanged Y-zeolites were used as the model catalysts. The results indicated that when Ba, Ca, La, Y or Ce was used for the canon exchange, the exchanged cation did not affect the thermal aging behavior of Ru in Y-zeolite, as evidenced by ^(129)Xe-NMR and EXAFS.
남기연,김준형,조성준,이현용,Nam Gi-Yeon,Kim Jun-Hyung,Cho Sung-June,Lee Hyun-Yong 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.5
In this paper, we report the changes of morphology, transmittance and photoluminescence (PL) in hydrogenated amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ thin films, thermally deposited at the vapor incidence angles (${\theta}$) of $0^{\circ},\;45^{\circ}\;and\;80^{\circ}$. The hydrogenation was carried out under the condition of a $H_2$ pressure ($P_H$) of 20 atm and an annealing temperature range, $T_{Anneal}$ of $150^{\circ}C{\sim}210^{\circ}C$. A columnar structures with an inclination angle of approximately $65{\sim}70^{\circ}$ was formed in $80^{\circ}$-deposited films and then the columnar was broken after hydrogenation. Transmittance increases with an increase of deposition angle and by the hydrogenation. In particular, a broad PL band on the extended region is observed in obliquely deposited films and it increases during the hydrogenation.
다양한 입자크기와 산성도를 지닌 MTT 제올라이트의 합성 및 촉매특성 연구
박성준,장회구,조성준,Park, Sung Jun,Jang, Hoi-Gu,Cho, Sung June 한국화학공학회 2018 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.56 No.4
다양한 Si/Al 몰비를 지닌 MTT 제올라이트를 합성하여 methanol-to-olefin(MTO) 반응에서 촉매의 산성도가 미치는 영향을 조사하였다. Si/Al 몰비를 조절하기 위해 N,N,N',N'-테트라메틸-1,3-디아미노프로판을 구조유도물질(SDA)로 사용하였으며, 알루민산나트륨의 함량을 달리하여 $20SiO_2$ : 30SDA : x (=0.25~1.25)$NaAlO_2$ : 2NaOH : $624H_2O$ 조성으로 모액을 제조한 후 433 K에서 4일 동안 수열 합성하였다. 알루민산나트륨의 함량이 감소함에 따라 MTT 제올라이트의 입자 크기가 증가하였으며 또한 산점의 양도 감소하였다. 제조한 MTT 제올라이트의 촉매 활성을 평가하기 위해 673 K에서 공간속도(WHSV)가 $1.2h^{-1}$인 조건으로 MTO 반응을 수행한 결과, Si/Al 몰비가 24인 H-MTT (1.00Al) 촉매가 900분까지 90% 이상의 전환율을 유지함을 확인하였다. The influence of acidity in MTT zeolite of different Si/Al molar ratio's on the catalyst activity in methanol-to-olefin (MTO) reaction has been investigated. The Si/Al ratio was controlled with the Al content in the gel when N,N,N',N'-tetramethyl-1,3-diaminopropane was used as a structure directing agent (SDA). The gel composition was controlled to $20SiO_2$ : 30SDA : x (=0.25~1.25)$NaAlO_2$ : 2NaOH : $624H_2O$, which was subject to the hydrothermal synthesis at 433 K for 4 days. As the composition of sodium aluminate decreased, the particle size of MTT zeolite increased, and also the amount of acid sites decreased. To investigate the catalytic performance, MTO reaction was carried out at 673 K with $1.2h^{-1}$ WHSV. It was found that the H-MTT (1.00Al) catalyst with a Si/Al molar ratio of 24 maintained the methanol conversion over 90% for 900 min.