http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정종윤(Jong-Yun Jeong),최성식(Seong-Sik Choi),이헌태(Heon-Tae Lee),최승규(Seung-Kyu Choi),노대석(Dae-Seok Rho) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
최근 정부의 녹색성장 정책에 의하여 신에너지비중을 확대하는 정책을 적극적으로 추진하고 있어, 태 양광전원의 설치도 매년 증가하고 있는 실정이다. 한편 태양광 모듈은 반영구적인 사용이 가능하지만, 열화현상과 다양한 장애요소로 발전성능 저하가 이루어지고 있다. 따라서 본 논문은 태양광 전원의 특 정 모듈의 이상발생으로 인한 출력저하는 전체출력에 큰 영향을 미치지만 특정 모듈의 이상발생으로 인한 출력저하는 전체 출력의 감소를 일으킨다. 본 논문에서는 이러한 문제점을 분석하고, 성능평가를 위한 태양광 전원용 시험장치를 제작하여, 모듈의 음영과, 기후변화에 따른 출력특성을 시험 및 분석 하였다. 그 결과 본 논문에서 제작한 시험장치의 신뢰성을 확인하였다.
용접형 판형열교환기의 열전달 및 압력강하특성에 관한 수치해석
정종윤(Jong Yun Jeong),남상철(Sang Chul Nam),강용태(Yong Tae Kang) 대한기계학회 2008 大韓機械學會論文集B Vol.32 No.9
Numerical analysis was carried out to examine the heat transfer and pressure drop characteristics of plate heat exchangers for absorption application using Computational Fluid Dynamics(CFD) technique. A commercial CFD software package, FLUENT was used to predict the characteristics of heat transfer, pressure drop and flow distribution within plate heat exchangers. In this paper, a welded plate heat exchanger with the plate of chevron embossing type was numerically analyzed by controlling mass flow rate, solution concentration, and inlet temperatures. The working fluid is H₂O/LiBr solution with the LiBr concentration of 50-60% in mass. The numerical simulation shows reasonably good agreement with the experimental results. Also, the numerical results show that plate of the chevron shape gives better results than plate of the elliptical shape from the view points of heat transfer and pressure drop. These results provide a guideline to apply the welded PHE for the solution heat exchanger of absorption systems.
정종윤(Jong-Yun Jeong),류기열(Ki-Yeol Ryu),이정태(Jung-Tae Lee) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.2Ⅲ
이벤트에 기반한 약결합의 분산 응용이 인터넷과 같은 광역네트워크 상에서의 주요 응용분야로 대두되고 있다. 분산응용의 컴포넌트 사이의 이벤트 전송을 구현하는 방법으로 내용기반 등록/발표 시스템이 최근 활발히 연구되고 있다. 본 논문에서는 효과적인 내용기반 등록/발표 시스템을 구현하기 위해 기존에 발표된 대표적인 시스템인 SIENA에 바탕을 두고, SIENA에서의 이벤트 라우팅 알고리즘의 문제점을 분석하고 이를 개선한 라우팅 알고리즘을 개발하였다.
정종윤 ( Jong Yun Jeong ),한미아 ( Mi Ah Han ),박종 ( Jong Park ),류소연 ( So Yeon Ryu ) 한국치위생학회(구 한국치위생교육학회) 2016 한국치위생학회지 Vol.16 No.2
Objectives: The purpose of the study was to investigate the related factors of performance of radiation safety management in dental hygienists. Methods: A self-reported questionnaire was completed by 183 dental hygienists using dental radiography in 110 dental clinics in G area by convenience sampling methods. The questionnaire consisted of general characteristics of the subjects, radiation-related characteristics, and performance and management of radiation safety. Results: Performance score of radiation safety management was 35.71±12.49 in dental hygienists. The performance score of radiation safety management were associated with sex, numbers of dental hygienists, the average numbers of admitted patients per day, the total clinical experience, existence of manual for radiation safety management and perceived need for education of radiation safety management. Conclusions: The performance score was relatively low. The performance score was associated with radiation safety manual and safety equipment. The preparation of radiation protective environment and equipment will improve the performance of radiation safety management in dental hygienists.
바이패스 다이오드 구성을 고려한 태양광모듈의 출력특성에 관한 연구
정종윤(Jong-Yun Jeong),최성식(Seong-Sik Choi),이헌태(Heon-Tae Lee),이계호(Gye-Ho Lee),김승호(Seung-Ho Kim),노대석(Dae-Seok Rho) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
태양광모듈은 다수의 태양전지가 직렬로 연결되어 있기 때문에 단 하나의 태양전지라도 이상이 발생하면 모듈의 전체 출력이 이상이 발생한 전지의 전류로 제한된다. 상기의 현상을 방지하기 위하여 이상이 발생한 태양전지가 포함된 바이패스 다이오드 그룹을 직렬연결에서 제외시켜 태양광모듈의 출력손실을 감소시킨다. 따라서 본 논문에서는 바이패스 다이오드에 의한 태양광모듈의 특성을 분석하기위하여 PSIM 소프트웨어를 이용하여 상세 태양광모듈을 모델링하였고, 이에 따라 해당모듈의 바이패스 다이오드 개수를 변경시키며 태양광모듈의 출력특성을 분석한 결과, 바이패스 다이오드와 연결된태양전지의 구성에 따라 모듈의 출력손실이 감소함을 확인하였다.
태양광모듈의 모델링 및 성능향상을 위한 최적구성방안에 관한 연구
정종윤(Jong-Yun Jeong),최성식(Sung-Sik Choi),최홍열(Hong-Yeol Choi),유상원(Sang-Won Ryu),이인철(In-Cheol Lee),노대석(Dae-Seok Rho) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.5
태양광 모듈은 필요한 발전량을 얻기 위해 태양 전지를 직렬과 병렬로 조합하여 구성하며, 이 모듈은 일사량 및 온도 에 따라 발전성능이 크게 좌우되는 특성을 가지고 있다. 또한, 태양광 전원은 건물 또는 나무 등의 주변 환경에 의한 음영과 같은 특수한 상황에 의하여 출력손실이 발생하게 된다. 즉 태양광 전원을 구성하는 태양광 모듈 일부에 부분음영이 발생할 경우, 태양광 모듈의 단락전류가 제한되어 전체 발전량 손실을 초래하고, 열점(Hot-Spot) 현상과 같은 열화현상이 발생하여 모듈의 수명을 단축시킨다. 따라서 본 논문에서는 태양광 모듈의 출력을 향상시키기 위한 태양전지와 바이패스 다이오드의 최적구성 알고리즘을 제시하였다. 또한, 부분 음영에 의한 출력손실을 최소화하기 위하여 태양광 어레이의 회로를 최적으로 구성하는 알고리즘을 제시하였다. 상기 알고리즘을 바탕으로 회로해석 프로그램인 PSIM S/W를 이용하여 태양광 모듈과 태양 광 어레이를 모델링하여 시뮬레이션을 수행하였다. 그 결과, 본 논문에서 제안한 태양 전지와 바이패스 다이오드의 최적구성 알고리즘과 태양광 어레이의 최적구성 알고리즘이 태양광 전원의 성능 향상에 유용함을 확인하였다. Solar cells in a PV module are connected in series and parallel to produce a higher voltage and current. The PV module has performance characteristics depending on solar radiation and temperature. In addition, the PV system causes power loss by special situations, including the shadows of the surrounding environment, such as nearby buildings and trees. In other words, an increase in power loss and a decrease in life cycle can occur because of the partial shadow and hot-spot effect. Therefore, this paper proposes the optimal configuration algorithm of a bypass diode to improve the output of a PV module and one of a PV array to minimize the loss of the PV array. In addition, this paper presents a model of a PV module and PV array based on the PSIM S/W. The simulation results confirmed that the proposed optimal configuration algorithms are useful tools for improving the performance of PV system.