http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정승환,최익,최주엽,Jung, Seung-Hwan,Choy, Ick,Choi, Ju-Yeop 한국전자통신학회 2013 한국전자통신학회 논문지 Vol.8 No.7
Generally, the buck converter controller was designed to control output voltage of the converter. However, design of the controller in photovoltaic power conditioning system is different from general design. the controller in photovoltaic power conditioning system controls input voltage of the converter(output voltage of the solar cell) for MPPT(Maximum Power Point Tracking). This paper proposes novel buck converter model which can control input voltage of the converter. We integrate this model with a model of solar cell. and linearize at the operating point(MPP). In addition, we determine whether or not suitable for the general linear controller design into small and large signal analysis. 일반적으로 벅 컨버터 제어기는 컨버터의 출력 전압을 제어하도록 설계하지만, 태양광발전시스템에서의 벅 컨버터 제어기는 설계 방식을 달리 구분해야 한다. 본 논문에서는 MPPT(Maximum Power Point Tracking)을 위하여 벅 컨버터의 입력 전압(태양광전지의 출력 전압)을 제어한다고 가정하였다. 또한, 컨버터의 입력 전압을 제어하기 위한 새로운 벅 컨버터 모델을 제시한다. 이 컨버터 모델은 최대전력점(MPP)에서 동작점을 두어 선형화한 태양광전지의 모델을 포함하며, 모델의 타당성을 검증하기 위하여 대신호와 소신호로 나누어 분석한다. 또한 일반적인 선형제어기를 설계하였을 때, 제어 가능성을 분석하여 검증한다.
정승환(Seung-Hwan Jung),최익(Ick Choy),임지훈(Ji-Hoon Lim),송승호(Seung-Ho Song),최주엽(Ju-Yeop Choi) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
태양광발전시스템에 사용되는 컨버터들의 제어기는 보다 좋은 성능을 위하여 정확하게 설계해야 한다. 이를 위해서는 기존과는 다르게 모델링되어야 하며, 태양전지의 특성 또한 고려되어야만 한다. 본 논문에서는 태양전지와 벅 컨버터 모델링 방법을 새로이 제시하고, 이를 바탕으로 전류/전압 제어기를 설계하였다. 또한 모델링을 통한 선형 모델과 실제 비선형 모델과의 시뮬레이션 차이를 비교 및 분석하였다.
정승환(Jung Seung-Hwan),최익(Choy Ick),임지훈(Im Ji-Hoon),최주엽(Choi Ju-Yeop),송승호(Song Seung-Ho),안진웅(An Jin-ung),이동하(Lee Dong-Ha) 한국태양에너지학회 2010 한국태양에너지학회 학술대회논문집 Vol.2010 No.4
modelling of the buck converter in photovoltaic power conditioning system is not a possibility of doing with input-output relationship from existing procedures. Because the input current and voltage of the buck converter in fluctuate at any time. The controller which design with the method which has like this error cannot have a good efficiency. In this paper, in order to design accurate controller of buck converter, solar cell model and buck converter model is proposed. and buck converter modeling used a state-space averaging method.
정승환(Seung-Hwan Jung),최익(Ick Choy),임지훈(Ji-Hoon Im),최주엽(Ju-Yeop Choi),안진웅(Jinung An),이동하(Dong-Ha Lee) 한국태양에너지학회 2009 한국태양에너지학회 학술대회논문집 Vol.2009 No.11월
modelling of the buck converter in photovoltaic power conditioning system is not a possibility of doing with input-output relationship from existing procedures. Because the input current and voltage of the buck converter in fluctuate at any time. The controller which design with the method which has like this error cannot have a good efficiency.. In this paper, firstly, in order to design accurate controller of buck converter, new model is proposed. The modeling used a state-space averaging method and came to accomplish. Secondly, the process which design the controller is described. Finally, the simulation results are analyzed.
정승환(Seung-Hwan Jung),최익(Ick Choy),최주엽(Ju-Yeop Choi) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.5
최근, 디지털 디머 시스템의 수요는 꾸준히 증가하고 있는 추세이다. 하지만, 국내 연구는 그에 비하여 미비한 실정이다. 본 논문에서는 디지털 디머 장치들을 설계, 제작하고, 시스템을 구성하는 방법을 제안한다. 디지털 디머 장치들은 크게 콘솔과 디머 랙으로 나눌 수 있으며, 콘솔은 GUI환경의 사용자 인터페이스를 제공하여 손쉽게 각 조명기기를 제어하는 패턴을 구현하며, 디머 랙은 콘솔로부터 전송받은 각 조명 레벨을 위상각 제어 방식으로 조명기기의 밝기를 제어한다. Recently, a demand of the digital dimmer system is increasing steadily, but domestic research is not sufficient to the expectation. In this paper, a digital dimmer equipment is developed and presented to compose a system. Digital dimmer system compose console and dimmer rack. Console controls of user interlace and a total system, and dimmer rack controls brightness of lighting equipment by a way of phase angle control with each illumination level to get from console.
State-Space Averaging Method를 사용한 태양광 발전시스템에서의 벅 컨버터 모델링
정승환(Seung-Hwan Jung),최익(Ick Choy),임지훈(Ji-Hoon Im),최주엽(Ju-Yeop Choi),안진웅(Jinung An),이동하(Dong-Ha Lee) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.2
태양광발전 시스템에서 사용되는 컨버터는 기존의 입출력 관계로 모델링할 수 없다. 이는 태양광 전지를 컨버터의 입력단으로 사용하여, 모델의 입력 전류와 전압이 수시로 변동하기 때문이다. 이런 오류가 있는 방법으로 모델링하여 설계한 제어기가 좋은 성능을 내기는 어렵다. 본 논문에서는 기존의 입출력 관계를 반대로 한 벅 컨버터의 새로운 모델을 제시한다. 모델링은 상태공간평균화 방법(State-Space Averaging Method)을 사용하였다.
PVPCS DC/DC 컨버터 모델링 및 2중 루프 제어와 단일 루프 제어의 특성 비교
김동환,정승환,송승호,최주엽,최익,안진웅,이상철,이동하,Kim, Dong-Hwan,Jung, Seung-Hwan,Song, Seung-Ho,Choi, Ju-Yeop,Choi, Ick,An, Jin-Ung,Lee, Sang-Chul,Lee, Dong-Ha 한국태양에너지학회 2012 한국태양에너지학회 논문집 Vol.32 No.suppl3
In photovoltaic system, the characteristics of photovoltaic module such as open circuit voltage and short circuit current will be changed because of cell temperature and solar radiation. Therefore, the boost converter of a PV system connects between the output of photovoltaic system and DC link capacitor of grid connected inverter as controlling duty ratio for maximum power point tracking(MPPT). This paper shows the dynamic characteristics of the boost converter by comparing single-loop and two-loop control algorithm using both analog and digital control. Both proposed compensation methods have been verified with computer simulation to demonstrate the validity of the proposed control schemes.
자립형 태양광 발전 시스템을 위한 3상 양방향 DC-AC 인버터 연구
양승대(Yang Seung-Dae),정승환(Jung Seung-Hwan),최주엽(Choi Ju-Yeop),최익(Choy Ick),이영권(Lee Young-Kwon) 한국태양에너지학회 2012 한국태양에너지학회 학술대회논문집 Vol.2012 No.3
This paper presents the study of 3-Phase bi-directional DC to AC inverter with unity power factor. 3-Phase bi-directional DC to AC inverter is important for the bi-modal PV PCS with an energy storage system. Both Inverting and converting are needed to connect between the grid side and boost converting side to charge and discharge the energy storage system. The paper proposes the appropriate circuit topology and proper control system for the bi-directional inverter. It also proposes the method of selecting the optimum control method considering system stability. PSIM simulation is used to validate the proposed algorithm.
저비용의 태양광 최대전력 추종 제어를 통한 배터리 충전과 모터 제어
김승민(Kim, Seung-Min),정승환(Jung, Seung-Hwan),최주엽(Choi, Ju-Yeop),최익(Choy, Ick),이상철(Lee, Sang-Chul),이동하(Lee, Dong-Ha) 한국태양에너지학회 2013 한국태양에너지학회 학술대회논문집 Vol.2013 No.4
To increase the efficiency of the Photovoltaic, all of the generated Photovoltaic power delivered to power stage output, almost all Photovoltaic appliances are controlled by Maximum Power Point Tracking(MPPT). Existing PV MPPT technique have used output current and output voltage of the solar cell. Existing technique is sensing the output voltage and the output current of the solar cell and then compare the existing power calculated by the parameters and previous power. The algorithm is unnecessarily complicated and long. On the other hand, the proposed MPPT technique is only one sensing of the converter’s output parameters, so the MPPT algorithm is simple compared to the traditional approach and no need to insert another sensors for battery charger. In addition, we find transfer function with battery model and linearized model at the maximum power point of the output curve of the solar cell. By using it, we implement current control to regulate allowable current during the battery charging. Also we implement motor control that can be applied to the solar car. Finally, the proposed method has been verified with computer simulation.