http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임현교,김동준,김정현,한상호,조광섭,Lim, H.K.,Jin, D.J.,Kim, J.H.,Han, S.H.,Cho, G.S. 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.1
The plasma emission characteristics are investigated in cylindrical syringe plasma jet device. Cylindrical syringe electrode is applied AC power using inverter. In the center of syringe is injected into a inert gas and plasma jet occurs. If there is no ground electrode, firing voltage is 3 kV and plasma column length is 10 mm. According to high firing voltage and large current, the plasma column length control is difficult. The case of an internal ground electrode, firing voltage is 1 kV. Because of the losing current from internal ground, even if a higher input voltage, plasma emission does not occur. The case of an external ground electrode, the plasma column can be controlled between 0~10 mm with change the applied voltage from 1 to 2 kV, and the discharging current changed from 1 to 4 mA. 유리관에 삽입된 주사기 바늘을 이용한 플라즈마 제트 장치의 특성을 조사하였다. 원통형 주사기 바늘 전극에 교류 고전압을 인가하고, 유리관 끝에 설치된 접지전극의 형태에 따른 플라즈마의 방출 특성을 조사하였다. 접지전극이 없는 경우 방전 개시 전압이 약 3 kV이며, 플라즈마 방사 길이는 약 10 mm이다. 또한 높은 방전 개시 전압으로 인하여 플라즈마 방사 길이 및 전류 최소량의 제어가 어렵다. 내부접지 전극의 경우는 방전 개시 전압이 약 1 kV로 낮다. 그러나 플라즈마 전류가 내부에 위치한 접지 전극으로 흐르기 때문에 유리관 끝으로부터 플라즈마가 방출되지 않는다. 외부접지 전극의 경우는 인가전압 1~2 kV에서, 방전 전류 1~4 mA이며 플라즈마 방사 길이를 0~10 mm의 범위에서 용이하게 제어된다.
김동준,정종문,김정현,황하청,정재윤,조윤희,임현교,구제환,최은하,조광섭,Jin, D.J.,Jeong, J.M.,Kim, J.H.,Hwang, H.C.,Chung, J.Y.,Cho, Y.H.,Lim, H.K.,Koo, J.H.,Choi, E.H.,Cho, G.S. 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.1
관경이 수 mm인 세관 램프 내부에서 플라즈마의 확산을 조사하기 위하여 이극성(ambipolar) 확산방정식을 해하였다. 반경 방향의 확산에 의한 유리관 벽에서의 플라즈마 소멸 특성시간은 $\tau_r\;=\;(r_0/2.4)^2/D_a$로 주어진다. 반경 $r_0{\sim}1\;mm$이고 이극성 확산계수 $D_a{\sim}0.01\;m^2/s$ 이면, $\tau_r{\sim}17\;{\mu}s$이다. 이는 램프의 교류전원 구동에서 플라즈마를 유지하기 위한 구동 최소 주파수 ~30 kHz에 해당한다. 고전압이 인가되는 전극부에 발생한 고밀도의 플라즈마가 양광주로 확산되는 특성시간은 $\tau_z{\sim}0.1\;s$이다. 고밀도 플라즈마 경계에서의 시간에 대한 확산속도는 $t{\sim}10^{-6}\;s$일 때 $u_D{\sim}10^2\;m/s$이고, $t{\sim}10^{-3}\;s$이면 그 속도는 $u_D{\sim}1\;m/s$로 느려진다. 따라서 램프 길이 ~1 m에 대하여 전극부에서 생성된 고밀도 플라즈마가 양광주 전체로 확산되는 시간은 수 초가 걸린다. The ambipolar diffusion equation has been solved in a fine-tube lamp of a few mm in diameter. In the diffusion of radial direction, the plasma diffuses and vanishes away at the glass wall by recombination with the characteristic time of plasma loss is given by $\tau_r\;=\;(r_0/2.4)^2/D_a$. With the radius $r_0{\sim}1\;mm$ and the ambipolar diffusion coefficient $D_a{\sim}0.01\;m^2/s$, the vanishing time is calculated $\tau_r{\sim}10\;{\mu}s$ which corresponds to the least value of frequency 30 kHz for the sustaining the plasma in the operation of high voltage AC-power. In the diffusion of longitudinal z-direction, a high density plasma generated at the area of a high voltage electrode, diffuses into the positive column with the characteristic time $\tau_z{\sim}0.1\;s$. The plasma diffusion velocity at the boundary of high density plasma is $u_D{\sim}10^2\;m/s$ at the time $t{\sim}10^{-6}$ s and the diffusion velocity becomes slow as $u_D{\sim}1\;m/s$ at $t{\sim}10^{-3}\;s$. Therefore, for the long lamp of 1 m, it takes about several seconds for the high density plasma at the area of electrode to diffuse through the whole positive column space.
건설현장 근로자 및 관리기사의 안전의식과 안전교육 효율화 방안
김동하,고병인,임현교 한국산업안전학회 1999 한국안전학회지 Vol.14 No.2
Safety education should not only prevent workers from industrial accidents but also contribute to improve the productivity of manufacturing plants or construction sites. In practice this do not happen because workers do not realize the importance of safety education. This study aims to suggest a methodology to improve safety education of construction sites by surveying conditions of safety education and the safety consciousness of workers and engineers. The results showed that most education except regular educations were nominally carried out. Lectures and audio-visual education were mainly used as educational methods. After trainees attended the education session they completed a written survey, the most dissatisfied factor about safety education was education circumstances, of which rate was around 36%. The proportion of construction engineers who thought that safety management was contributable to cost reduction was 35%, to construction period 20%, and to quality enhancement 48%. Based on these results, this research pointed out the need to review training manuals, the development of educational programs, improvement of educational facilities to improve safety education of construction sites, and finally to discussed these issues.