http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임태빈(Im, Tae-Bin),김강욱(Kim, Kan-Wook),조정삼(Cho, Jung-Sam),강태인(Kang, Tae-In),이노복(Lee, No-Bok) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.11
대표적인 지향성 안테나인 야기 안테나를 무인 경계 레이더 센서에 적용 가능하도록 설계, 제작하였다. 본 논문에서 제안된 안테나가 무인 경계 레이더 센서에 적용되기 위해서는 7.2-8.2GHz의 동작주파수, 7dBi 이상의 최대 방사 이득과 60° 이상의 3dB 빔폭을 만족하여야한다. 7dBi 이상의 최대 방사 이득과 60° 이상의 빔폭을 얻기 위해 3 개의 디렉터를 가진 야기 안테나를 유전체 기판 위에 설계하였다. 또한 드라이브 단의 밸런스드 급전을 위하여 Microstrip-to-CPS 발룬을 설계하여 제안된 안테나에 적용하였다. 제안된 안테나의 가상 실험 결과와 측정 결과를 비교하여 제안된 안테나의 성능을 검증하였다. A Yagi antenna, which is a typical directional antenna, has been designed and fabricated as a surveillance sensor. The proposed Yagi antenna satisfies the requirements as a surveillance sensor; impedance bandwidth of 7.2-8.2GHz, maximum gain of 7dBi, and 3dB beamwidth of 60〫 in the azimuthal plane. The proposed Yagi antenna is designed with 3 directors and one driven element on a dielectric substrate. Also, a microstrip-to-CPS balun is designed and applied to the proposed antenna for balanced feeding of the dirven element. The performance of the proposed antenna has been verified by comparing the simulation and measurement results.
디지털 PI제어에 의한 브러시리스 직류모터의 안정도 향상
윤신용,백수현,김용,김철진,임태빈,Yoon, Shin-Yong,Baek, Soo-Hyun,Kim, Yong,Kim, Cherl-Jin,Im, Tae-Bin 한국조명전기설비학회 2000 조명·전기설비학회논문지 Vol.14 No.1
본 연구에서는 브러시리스 직류모터의 적합한 수학적 동가 모텔링을 구성하였으며 제어대상 BLOC 모터에 스 웹입력이 있는 상태로 역기전력의 측정에 의한 모터 파라미터를 측정하였다. 그리고 제시된 측정법의 타당성은 스템웅답의 실험결과에 의해서 확인하였다. 또한 훌센서로된 BLOC 모터의 오픈루프 전달함수로부터 얻은 근궤 적법의 결과에 따라 적합한 디지털제어기를 셜계하였으며 속도제어 가변을 위한 제어이득을 결정하였다. 여기서 수정된 Ziegler-Nichols의 동조법은 적합한 디지털 게인 설정을 위해서 적용되었으며 시스템의 안정성은 보드선 도와 실험으로 주파수영역의 해석에 의해서 입증하였다. This study have established proper mathematical equivalent model of Brushless DC (BLDC) motor and estimated the motor parameter by means of the back-emf measurement as being the step input to the controlled target BLDC motor. And the validity of proposed estimation method is confirmed by the test result of step response. As well, we have designed the reasonable digital controller as a consequence of the root locus method which is obtained from the open-loop transfer function of BLDC motor with hall sensor, and the determination of control gain for variable speed control. Here, revised Ziegler-Nichols tuning method is applied for the proper digital gain establishment, and the system stability is verified by the frequency domain analysis with Bode-plot and experimentation.