http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초임계상태에서 주위 유동 속도와 압력 변화에 따른 헵탄 액적의 기화 특성
임종혁(Jong-Hyuk Lim),이봉수(Bong-Su Lee),구자예(Ja-Ye Koo) 한국항공우주학회 2005 韓國航空宇宙學會誌 Vol.33 No.4
초임계 상태의 질소 유동 환경에서 헵탄 액적의 기화 특성을 수치적으로 연구하였다. 더불어 실기체 효과와 액적 내부 순환, 다양한 열역학적 물성치 및 고압 효과를 고려하였다. 또한 헵탄 액적 바로 근처에서의 저속 유동 문제를 풀기 위하여 예조건화 스킴을 적용한 시간 전진법을 수치 코드에 적용하였다. 주위 유동 속도와 주위 압력을 변화 시켜가면서 액적의 거동을 살펴보았다. 유동 속도 증가로 인한 레이놀즈수의 증가에 따라 액적의 변형이 활발히 이루어졌고, 동일한 레이놀즈수에 대해서는 압력이 높아질수록 액적의 변형이 약화되었다. The vaporization characteristics of a liquid heptane droplet in a supercritical nitrogen flow is numerically analyzed. The present model can account for real gas effects, liquid-phase internal circulation, variable thermodynamic properties and high-pressure effects. Time marching method with preconditioning scheme is employed to handle the low Mach number flows in dense heptane droplet region. Computations are made for the wide range of convective velocity and ambient pressure. Numerical results indicate that the droplet deformation becomes stronger by increasing the Reynolds number and it becomes relatively weak by increasing the pressure.
무수 말레인산으로 그래프트된 ENR 50에 Nylon 6를 혼합한 기체 고차단성 고무 배합물
임종혁(Jong Hyuk Lim),조을룡(Ur Ryong Cho) 한국고분자학회 2013 폴리머 Vol.37 No.6
낮은 기체투과성을 보이는 epoxidized natural rubber 50(ENR 50)에 매우 낮은 기체투과성을 가지고 있고 마모 특성이 우수한 Nylon 6를 이축형 압출기를 사용해서 블렌드하였다. 혼합물의 기계적 물성과 기체차단성이 향상되는 효과를 얻었으나 ENR 50 매트릭스상에 Nylon 6의 분산성이 떨어져 큰 상승효과를 보이지는 않았다. 따라서Nylon 6의 분산성을 개선하기 위해 ENR 50에 maleic anhydride(MAH)를 그래프트시켰다. MAH와 ENR 50간의 그래프트 반응은 FTIR 스펙트럼을 통해서 확인할 수 있었다. ENR 50-g-MAH/Nylon 6 배합물을 제조함으로 인해 기체차단성, 기계적 물성이 MAH를 사용하지 않았을 때보다 향상시킬 수 있었다. MAH의 그래프트 비율을 최대로높인 5 phr을 첨가하였을 때 가교밀도가 높았으며 가장 좋은 물성을 보였다. The ENR 50 having the lowest gas permeability was blended with Nylon 6 which exhibits superior gas permeability,excellent wear resistance by using a twin-screw extruder. The blended materials showed the increased gas barrier property and physical properties, but did not yield a great synergistic effect due to low dispersion of Nylon 6 to ENR 50. To improve dispersion of Nylon 6 in the rubber matrix, maleic anhydride (MAH) was grafted to ENR 50. The grafting reaction between MAH and ENR 50 was evidenced using IR spectroscopy. The grafted and blended materials, ENR 50-g-MAH/Nylon 6 compounds, resulted in an enhanced gas barrier property and physical properties compared with compounds without MAH. The compound at 5 phr of MAH showed the highest crosslinking density and the best performances.
SQuAD 를 활용한 MRC 알고리즘 성 능 분석 연구
임종혁 ( Jong-hyuk Lim ) 한국정보처리학회 2018 한국정보처리학회 학술대회논문집 Vol.25 No.1
MRC(기계독해)는 Passage, Question, Answer 로 이루어진 Dataset 으로 학습된 모델을 사용하여 요청한 Question 의 Answer 를 같이 주어진 Passage 내에서 찾아내는 것을 목적으로 한다. 최근 MRC 시스템의 성능 측정 지표로 활용되는 SQuAD Dataset을 활용하여 RNN 의 한 분류인 match-LSTM 과 R-NET 알고리즘의 성능을 비교 분석하고자 한다.
단계별 점수산출방식에 따른 테트리스 게임 시스템 설계 및 구현
임종혁 ( Jong-hyuk Lim ),정화영 ( Hwa-young Jeong ) 한국인터넷정보학회 2005 인터넷정보학회논문지 Vol.6 No.2
1985년에 처음 등장했던 테트리스는 많은 시간이 지난 지금에도 많은 유저들에게 사랑 받는 게임이 되었다. 지금까지의 테트리스는 줄이 삭제 될 때마다 삭제된 줄의 수에 따라 점수를 주는 방식을 채용하였고, 연속 공격 등에 관해 가산점을 부여해주었다. 그러나 이러한 점수 산출방식은 너무 일정하고 단순한 패턴을 주었다. 본 논문에서는 기존의 점수 계산 방식과는 다른 단계별 점수 계산 방식을 통하여 새로운 테트리스 게임 시스템을 설계 및 구현하고자 한다. 즉, 이는 전에 삭제된 줄의 수와 현재 삭제된 줄의 수를 비교하여 기본 점수에 가산점을 부여하는 방식이다. 단계별 점수산출방식을 이용하여 기존의 테트리스에서 한층 더 진보된 테트리스의 전략적인 이용을 가능하게 해 줄 것이다. At th first time in 1985, Tetris appeared, it became game that are loved to many users until now. Existent Tetris employed way to give score according to number of that is destroyed whenever line are destroyed, and give advantage about serial attack and so on. But, these score calculation method gave so fixed and simple pattern. In this paper, We design and implement the new tetris game System by score calculation method per level that is different with existent method. That is, this method is to compare present and before with number of destroyed line and give advantage in basis score. Also, it is going to permit strategic utilization of still more developed tetris than existent tetris using score calculation method per level.
2차 고조파를 이용한 UWB 시스템용 쿼드러쳐 혼합기 설계
정구영,임종혁,최병현,윤태열,Jung, Goo-Young,Lim, Jong-Hyuk,Choi, Byung-Hyun,Yun, Tae-Yeoul 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.12
본 논문에서는 IEEE 802.15.3a의 초광대역(Ultra Wideband: UWB) 시스템용 직접 변환 혼합기를 설계 및 제작하였다. 직접 변환 방식을 사용하는 UWB 혼합기는 dc offset, 2차 고조파 왜곡 등을 발생시키는데, 이 문제를 해결하기 위해 역병렬 다이오드 쌍을 이용하였다. $3.1{\sim}4.8GHz$ 동위상 전력분배기와 $1.5{\sim}2.4GHz$ 광대역 $45^{\circ}$ 전력분배기를 사용하였고, RF-LO의 격리도를 높이기 위하여 RF 신호는 -0.5 dB 이상 손실로 통과시키고 LO 신호는 -10 dB 이하로 차단하는 광대역 여파기를 작은 크기로 설계하였다. 이와 더불어, 역병렬 다이오드와 광대역 소자의 초광대역 임피던스 정합을 통해 주파수 변환 손실을 최소로 하였다. 제안된 혼합기의 측정 결과는 주파수 변환 손실이 13.5 dB, input third-order intercept-point($IIP_3$)는 7 dBm, 그리고 1-dB gain compression point ($P_{1dB}$)는 -4 dBm이다. I/Q 출력 양단간의 전력 오차는 1 dB, 그리고 위상오차는 ${\pm}3^{\circ}$이내의 초광대역 쿼드러쳐 혼합기로 동작하였다. This paper presents an ultra wideband(UWB) direct conversion mixer for IEEE 802.15.3a applications with simulation and measurement results. Since the direct conversion mixing causes dc-offset and even-order distortion, the proposed mixer adopts an anti-parallel diode pairs(APDPs) to solve these problems. The proposed mixer consists of an in-phase wilkinson power divider over $3.1{\sim}4.8GHz$, a wideband $45^{\circ}$ power divider over $1.5{\sim}2.4GHz$, and miniatured band pass filters(BPFs) for RF-LO isolations. The conversion loss is optimized with impedance matchings between APDPs and wideband components. The measured mixer shows the conversion loss of 13.5 dB, input third-order intercept-point($IIP_3$) of 7 dBm, and 1-dB gam compression point($P_{1dB}$) of -4 dBm. Quadrature(I/Q) outputs have the magnitude difference of about 1 dB and phase difference of ${\pm}3^{\circ}$.
황운규(Un Kyoo Hwang),임종혁(Jong Hyuk Lim) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.6
광물시장 성장과 함께, 고효율 DTH 해머 필요성이 함께 증가되고 있다. 그러나 DTH 해머는 지하 천공이라는 작동조건의 특성 때문에, 실험 데이터의 직접 취득이 어렵고, 실제 테스트를 하기 위해서는 DTH 드릴 리그와 많은 운용비를 필요로 한다. 본 연구에서는 이러한 DTH 해머의 제품개발 시간과 비용의 문제점을 컴퓨터 시뮬레이션을 이용하여 해결하고자 하였다. 이전 연구에서DTH 해머구조와 동작 원리를 분석하고, 시뮬레이션을 이용한 표준 모델을 제시하고, 그것을 실험과 비교 검증하였다. 이를 바탕으로 본 논문에서는 실험설계법을 이용하여DTH 해머의 타격에너지와 효율에 관한 제어인자를 도출하고, 이에 관한 최적화를 시도하였다. 그 결과 타격에너지를 14.9% 효율은 3.3% 높이는 결과를 얻었다. Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.