http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임재혁(Jaehyuk Lim),성현수(HyounSoo Sung),임세영(Seyoung Im) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
A dynamic finite element analysis of a rig test model for truck chassis systems is conducted to establish an appropriate model designed to predict the fatigue life. A reference Belgian road input, which has been obtained from a field test, is imposed on the finite element model in the modal finite element analysis, and the resulting strain history is employed for the prediction of the fatigue life. This is compared with the prediction based upon the strain history measured in the field test. The two agree with each other within the limitation of the field data and the input data to the model. The high frequency responses over 50 ㎐ are confirmed to be negligible as far as their effect on the fatigue life is concerned.
PAT 기반 온도장 보간을 이용한 관측위성의 열지향오차해석
임재혁(Jae Hyuk Lim),김선원(Sun-Won Kim),김정훈(Jeong-Hoon Kim),김창호(Chang-Ho Kim),전형열(Hyoung-Yoll Jun),오현철(Hyeon Cheol Oh),신창민(Chang Min Shin),이병채(Byung Chai Lee) 한국항공우주학회 2016 韓國航空宇宙學會誌 Vol.44 No.1
본 논문에서는 계절 및 주야의 온도변화를 고려한 관측위성의 열지향오차해석을 실시한다. 관측위성은 임무수행기간 동안 다채널의 관측센서를 이용해서 지구표면의 영상을 촬영한다. 그러나 주야 및 계절별로 최대 200도의 온도환경 차이가 발생하며 이로 인해 관측센서 및 별추적기의 시선벡터가 변화되고 정해진 목표지점의 영상촬영이 어렵다. 이런 문제를 사전예측하고 대응하기 위해서 열지향오차해석을 실시한다. 우선 궤도열환경해석으로부터 도출된 성긴 온도장 정보를 상세한 구조유한요소모델에 PAT기법을 이용해 보간하여 온도변화에 따른 열변형해석을 수행하였다. PAT로 보간된 온도분포의 정확도를 검증하였으며, 열변형해석결과로부터 열지향오차를 도출하였다. In this work, we conduct a thermal pointing error analysis of the observation satellites considering seasonal and daily temperature variation with interpolated temperature based on prescribed average temperature (PAT) method. Maximum 200 degree temperature excursion is applied to the observation satellites during on-orbit operation, which cause the line of sight (LOS) to deviate from the designated pointing direction due to thermo-elastic deformation. To predict and adjust such deviation, the thermo-elastic deformation analysis with a fine structural finite element model is accomplished with interpolated thermal maps calculated from the results of on-station thermal analysis with a coarse thermal model. After verifying the interpolated temperatures by PAT with two benchmark problems, we evaluate the thermal pointing error.