헬스케어산업 관점에서 본 린스타트업 적용 사례연구: (주)휴메딕스 사례를 중심으로

임성훈,김용태,Lim, Sung-Hoon,Kim, Yong-Tae 한국벤처창업학회 2015 벤처창업연구 Vol.10 No.3

최근 해외뿐만 아니라 국내에서도 헬스케어 산업에 대한 투자가 지속적으로 증가하고 있다. 그러나 시간과 비용이 많이 들어가는 헬스케어 산업의 특성은 창업 활성화 및 투자에 제약이 되고 있다. 이 때문에 IT산업 분야의 스타트업 기업에 적용되어 효용성을 인정받고 있는 린스타트업 방법론이 헬스케어 산업 분야의 스타트업에도 적용 가능한지를 살펴보는 것은 중요한 의미를 갖는다고 하겠다. 본 연구에서는 헬스케어 산업분야에서 기술력을 바탕으로 창업하여 벤처캐피탈 투자유치 및 코스닥 상장까지 이룬 기업의 사례를 통해서 IT 산업분야 초기 창업기업에 적용되어 왔던 린스타트업(Lean Startup)이론의 응용 가능성을 모색하고자 하였다. 헬스케어 산업분야의 특성 및 린스타트업 관점의 접근을 통한 사례연구의 함의는 다음과 같다. 첫째, 시제품의 테스트가 법으로 엄격히 규제되어 있는 헬스케어 산업분야의 기술창업일수록 린스타트업 이론에 의한 최소요건제품(MVP, Minimum Viable Product) 개발을 통한 가설검증이 중요하다. 둘째, 헬스케어 산업과 같이 전임상(pre-clinical study), 임상 시험 등 인허가 과정이 길고, 비용이 많이 들어가는 산업일수록 연구조직을 스타트업(Startup) 조직으로 구성하고 연구원의 기업가정신(Entrepreneurship)을 함양해야 된다. 셋째, 젊은 엔지니어의 기술창업을 활성화하기 위해서는 기업가정신 함양과 같은 응용인문학 교육과 더불어 린 스타트업과 같은 스타트업을 위한 차별화된 경영기법이 요구된다. The investment in healthcare industry has recently increased not only for global ventures but also for the domestic ventures. However, there has been hardship of founding and investment caused by healthcare startups characteristics that are costly and time consuming. In this study, the applicability of 'Lean Startup' theory to healthcare ventures was explored through the case of a domestic startup which accomplished funding from VC and KOSDAQ after establishing based on its technology in healthcare industry. There have been numerous case studies that applied 'Lean Startup' to IT industry. However, this case study that applied 'Lean Startup' to healthcare industry have some implications as follow: First, it is critical to conduct a hypothesis testing at initial research stage through R&D of 'MVP' (Minimum Viable Product) as the prototype testing is strictly prohibited in healthcare industry. Second, healthcare R&D teams ought to be well organized as startup teams and all researchers should be equipped with entrepreneurship as the licensing process in healthcare industry is time-consuming and costly due to issues like clinical studies. Lastly, management skills as smart and light as 'Lean Startup' are required in order to encourage young engineers' technology startups.

조석현상이 방조제 경계면의 응력-변형 거동에 미치는 영향 분석

임성훈,Eam, Sung Hoon 한국농공학회 2013 한국농공학회논문집 Vol.55 No.2

This study was performed for the purpose of analyzing the effect of tide on the stress-strain behavior in the boundary surface of sea dike embankment. Tide is a dynamic condition, but there are not suitable numerical models to solve the dynamic embankment condition caused by tide. So the analysis was simplified to quasi dynamic as follow. First, seepage by tide was analyzed according to elapsed time, and the results of the analysis at every hour during one periodic cycle time of 12 hours were applied to the pore water pressure conditions of stress-strain analysis with hyperbolic model by Duncan and Chang. The place at which maximum shear strain took place in the analysis result moved up and down repeatedly along the boundary of the dredged sand fill section and the crashed stone filter section. The value of maximum shear strain was large at high water level of tide. This result means that contraction and relaxation occur in turn repeatedly at every specific position along the boundary, and the repeated action compact loose position with sand moved down from the upper position by gravity. The experiment with the small sea dike model showed the result consistent with the numerical analysis. The surface of sea side on the dike collapsed at high water level after a couple of repetition of the rising and falling of water.

무기체계의 효과분석과 의사결정을 위한 다기준분석 방법론의 연구

임성훈,조기홍,박승,Lim, Sung-Hoon,Cho, Ki-Hong,Park, Seung 한국군사과학기술학회 2009 한국군사과학기술학회지 Vol.12 No.5

Weapon system currently considers the research about effect analysis including cost effectiveness methodology for a budget management and an achievement of the military strategy goal. So that, this study considers the theoretical background, strength and weakness of several Multi-Criteria Decision Making, and an effect analysis of weapon system. And AHP(Analytic Hierarchy Process) is selected for the best effect analysis methodology of weapon system. Therefore, we applied AHP to the case study of the new generation Multiple Launcher Rocket System, performing the analysis of cost effectiveness methodology. Using AHP and cost effectiveness methodology, we propose the actual and proper decision making result.

수두손실률의 경시변화에 의한 방조제 제체의 점진적인 차수상태 변화 감시

임성훈,Eam, Sung Hoon 한국농공학회 2015 한국농공학회논문집 Vol.57 No.1

In this study it was adopted on sea dike monitoring that the safety monitoring with statistical limits which was adapted usually on safety monitoring by measuring pressures, stresses or deformations. And also the hydraulic head loss rate change according to passage of time was calculated for the purpose of safety monitoring. Safety monitoring by setting the statistical limit on the measured pore water pressure graphs need to be supplemented with an additional method of monitoring because the difference between the rise and fall of the tide was irregular. Safety monitoring by the limits set from values predicted by linear regression and standard errors on the hydraulic head loss graph was not affected by irregularity of tide. But if the condition of an embankment is changed gradually and slowly, it will not be detected on the hydraulic head loss graph. The graph of hydraulic head loss rate for every 24 hours vs date showed clearly that the sea water blocking state was getting better or not even though it was changed gradually and slowly.

탄소나노튜브 밀도의 변화에 따른 전자방출 안정성 연구

임성훈,윤현식,유제황,문종현,박규창,장진,문병연,Lim Sung Hoon,Yun Hyun Sik,Ryu Je Hwang,Moon Jong Hyun,Park Kyu Chang,Jang Jin,Moon Byeong Yeon 한국진공학회 2005 Applied Science and Convergence Technology Vol.14 No.4

본 연구는 실리콘 질화막 박막을 덮개층으로 사용하여 탄소나노튜브를 성장하고, 성장된 나노튜브의 전자방출특성을 조사하였다. 탄소 나노튜브는 triode PE-CVD 장치에 의해 성장되었으며, 탄소나노튜브의 밀도는 실리콘 질화막의 두께에 따라 크게 변하였다. 탄소 나노튜브의 밀도가 $10^{4}$/$cm^{2}$에서 전자방출 특성이 가장 우수하였으며, 이때 전자방출특성은 문턱전계 1.2 V/$\mu$m, 전류밀도는 3.6 V/$\mu$n의 전기장에서 0.17 mA/$cm^{2}$으로 측정 되었다. 또한, 진공 챔버에서 질소($N_{2}$) 분위기 하에서 전자방출 안정성을 조사하였으며, 탄소나노튜브의 밀도가 감소함에 따라 전자방출 안정성이 향상되었고, 탄소나노튜브의 밀도가 $10^{4}$/$cm^{2}$ 인 경우 $1\times10^{-4}$ A/$cm^{2}$ 이상의 전류가 흐르는 특성을 보였으며, 이 경우 $1\times$$10^{-5}$ Torr의 압력하에서 방출 전류의 안정도는 최소인 $2\%$를 유지하였다. We report on the field emission properties from vertically aligned carbon nanotubes (CNTs) produced by a triode PECVD with a SiNx capping layer on metal catalyst. It is found that the CNTs density can be controlled by the capping layer thickness and decreases with increasing SiNx thickness. The CNT density of $\~$ 104/$cm^{2}$ exhibited highest electron emission characteristics, the threshold field of 1.2 V/$\mu$m and the current density of 0.17 mA/$cm^{2}$ at 3.6 V/$\mu$m. We have carried out investigation of electron emission stability under ambient gas of N2. The electron emission stability was improved with decreasing CNT density. Under $1\times$$10^{-5}$ Torr ambient pressure, the CNTs in 5 $\mu$m hole show electron emission current higher than $1\times$$10^{-4}$ A/cm2 and it's electron emission uniformity has $2\%$.

포화된 사질토에서 비배수 공극수압거동에 대한 탄성해석모델의 개발

임성훈,Eam, Sung-Hoon 한국농공학회 2005 한국농공학회논문집 Vol.47 No.5

In this study. it was suggested that the elastic model to analyze the behavior of pore water pressure in saturated sand specimen on the condition of non-drainage. The model based on the experiments which were performed for the relationships between the pore water pressure and the grain size of specimen, and effective stress, respectively. The suggested model embodied the pore water and soil grain as separate elastic springs of different stiffness. The springs were joined parallel and the axial strains were restricted to the same deformation. The suggested model was well consistent with the experiments.

수두손실률에 의한 방조제 침투류 감시 및 해석 기법 개발

임성훈,허건,Eam, Sung Hoon,Heo, Gun 한국농공학회 2014 한국농공학회논문집 Vol.56 No.6

In this study the pore water pressures were measured in sea dike constructed with the sand dredged in the sea, and they were analyzed with the hydraulic head loss rate to estimate quantitatively the state of blocking seepage in the sea dike embankment. Blocking state was expressed as the number between 0 and 1. the number of 1 means the state of perfectly blocking seepage and the number of 0 means the state of sea water being passing free. The deeper the installed position was the lower the hydraulic head loss rate was and the longer the seepage path length was the higher the hydraulic head loss rate was. The estimated R-squareds were close to 1, which means that the embankment was steady state without movement of soil particles.

수두손실률, 투수계수 및 공극비의 상호관계를 통한 제체의 다짐상태 평가

임성훈,Eam, Sung Hoon 한국농공학회 2015 한국농공학회논문집 Vol.57 No.1

In this study the laboratory test for hydraulic conductivity and the seepage analysis with finite element method on measurement section of sea dike embankment were performed for the purpose of estimating the relative density of embankment from the measured pore water pressures, and both results of the test and the analysis were coupled with the method of estimating seepage blocking state with the hydraulic head loss rate in sea dike embankment. The relationship of void ratio vs hydraulic head loss rate was obtained by setting hydraulic conductivity as common ordinate on the relationships between the void ratio and the hydraulic conductivity and between the hydraulic conductivity and the hydraulic head loss rate. The void ratio on the segment between measuring points was calculated from the coupled relationship of the void ratio vs the hydraulic conductivity. The allowable upper and lower limits of hydraulic head loss rate and those of void ratio on the safety were generated from the coupled relationship between the laboratory compaction test and the sedimentation test. Current hydraulic head loss rate and void ratio were evaluated in the allowable range between upper and lower limits.

PLT buffer층의 삽입에 따른 강유전 PZT박막의 특성 향상

임성훈,이은선,정현우,전경아,이상렬,Lim, Sung-Hoon,Lee, Eun-Sun,Chung, Hyun-Woo,Jeon, Kyung-Ah,Lee, Sang-Yeol 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.2

The Pb(Zr,Ti)O$_3$ thin films were fabricated with Pb(La,Ti)O$_3$ buffers in-situ onto Pt/Ti/SiO$_2$/Si substrates by pulsed laser deposition method. We have observed the increase of the remanent polarization using PLT buffers. The remanent polarization value of 33.4 $\mu$C/$\textrm{cm}^2$ and the coercive field value of 66.4 kV/cm were obtained when the PLT tufter was deposited for 15 seconds. Enhancement of the polarization is resulted from the enhanced orientation of PZT thin film because of the PLT buffet layer.

점성토 시료추출관이 시료교란에 미치는 영향

임성훈,Eam, Sung-Hoon 한국농공학회 2009 한국농공학회논문집 Vol.51 No.5

The total recovery ratio test on undisturbed clay soil sampling in the field and the finite element method analysis on modified static state of penetration process were conducted for the purpose of deciding the most important factor among the shape factors of thin wall tube. The adhesion between tube wall and soil did not decrease although internal clearance ratio of tube increased within the little change of tube area ratio. The most part of disturbance occurred in the tip of sampling tube during the penetration. The longitudinal displacement was larger than the lateral displacement because soil was confined laterally after being entered into tube, and also the longitudinal displacement was larger in the upper part of the sample tube than in the lower part.