http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RMR 변수의 $x-R_s$ 관리도 분석을 통한 굴착면 전방 단층대 예측 기법
임성빈,김광염,김창용,서용석,Yim, Sung-Bin,Kim, Kwang-Yeom,Kim, Chang-Yong,Seo, Yong-Seok 한국터널지하공간학회 2010 한국터널지하공간학회논문집 Vol.12 No.6
A new approach for prediction of a fault zone ahead of tunnel face by using statistical control charts is suggested and applied to the construction site. $x-R_s$ control charts of RMR parameters were investigated as approaching and passing through fault zone. The abnormal signal from the control charts was observed and analyzed based on statistical criteria. Fault zones in the application area were predicted in advance using this method and it was verified by comparing with observation data like horizontal boring and face mapping. 통계 관리도 기법을 활용한 터널 굴착면 전방 단층대 예측 기법을 제시하고 적용성을 검토하였다. 5개의 RMR 변수와 기초 RMR에 대한 $x-R_s$ 관리도를 작성하여 단층대로 접근함에 따른 각 변수의 변화 분석을 통해 이상 구간을 통계적인 기준에 의해 판정하였으며, 이러한 이상 구간을 단층대 구간으로 간주하였다. 관리도 평가 기법을 터널 시공현장에 적용한 결과, 선진수평시추 및 막장 관찰을 통해 확인된 3 개소의 단층대 구간은 관리도 판정에 의해 단층대가 출현하는 시점보다 각각 1~3 굴착면 이전에 인지되었으며, 거리로 환산하면 2.2 m, 5.0 m, 6.0 m 이전에 해당된다.
치주판막술시 여분의 결합조직을 이용한 치은퇴축의 회복에 대한 증례보고
임성빈,정진형,이재현,Yim, Sung-Bin,Chung, Chin-Hyung,Lee, Jae-Hyun 대한심미치과학회 1995 Journal of the Korean Academy of Esthetic Dentistr Vol.4 No.1
A mucogingival grafting procedure has been developed to cover denuded root surfaces. This procedures need to connective tissue, so many clinician open the trap door to palatal side of the patient. In this study, where palatal pocketing was present, pocket elimination was performed, and the tissue normally discarded after thinning of the palatal flap was used as a grafting material. The esthetics in recipient site, both color match and tissue contour were acceptable to the patient in this case.
수량화방법 I을 이용한 퇴적암 터널의 지질 인자별 변위 영향도 분석
임성빈,서용석,김창용,김광염,Yim, Sung-Bin,Seo, Yong-Seok,Kim, Chang-Yong,Kim, Kwang-Yoem 대한지질공학회 2007 지질공학 Vol.17 No.2
터널 시공 중 일상적으로 수행되는 계측에 의해 정량화되는 터널의 거동은 안정성 평가를 위한 주요한 항목이며, 이는 지역적인 지질학적 특성에 크게 의존한다. 본 연구에서는 지질학적 특성 차에 의한 RMR 항목별 터널 거동에 미치는 영향도를 분석하기 위하여, 터널의 face mapping 자료와 계측자료를 각각 설명변수와 종속변수로 한 수량화 분석을 실시하였다. 분석 결과, RMR 인자가 터널의 변위에 미치는 중요도의 평균은 R1, R2, R3, R4, R5 각각 17.0%, 20.4%, 20.4, 11.6%, 30.6%로서, 이는 분석지역의 지하수특성이 변위에 크게 영향을 미친 것으로 판단된다. Tunnel behavior measured by monitoring during construction is a main item for safety evaluation and it depends widely upon local geological characteristics. To assess in this study how much the geological factors influence on tunnel behavior for each RMR factor, a quantification analysis was carried out using tunnel face maps and measurements as explanatory variables and dependent variables, respectively. The results showed that average significance of the influence of RMR factors - R1, R2, R3, R4 and R5, on tunnel displacements are 17.0%, 20.4%, 20.4%, 11.6% and 30.6%, respectively, and this probably indicates that the groundwater condition played a significant role for the tunnel displacement.
통합된 컴포넌트 공유환경 구축을 위한 컴포넌트 레지스트리 설계
임성빈(Sung Bin Yim),문창주(Chang Joo Moon),백두권(Doo Kwon Baik) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.2Ⅰ
소프트웨어의 재사용에 관한 문제는 오래 전부터 풀어야 할 과제로 내려왔다. 계속적인 개발에 따른 재사용의 심각함을 인식하고 기존의 제품이나 기능코드 모듈들을 어떻게 재활용 할 지에 대해서 연구해 왔었다. 이러한 관점에서 컴포넌트라는 개념의 중요성이 부각되어지고 계속적인 노력을 하고 있는데 체계화와 잡히지 않은 부분별한 컴포넌트 개발로 인해, 컴포넌트 홍수라는 새로운 문제를 발생시킨다. 따라서, 본 논문에서 컴포넌트 레지스트리라는 어플리케이션을 만들어 컴포넌트들을 응용분야별, 기능별 등으로 분류하여 재사용을 용이하게 하였다. 또한, 컴포넌트 레지스트리를 이용하여 개발자나 사용자들에게 컴포넌트를 공급함으로서 시간관 노력을 줄일 수 있고 통합된 관리로서 표준화가 가능하게 만들었다. 이렇게 체계화된 컴포넌트 관리로서 공유환경을 구축할수 있고 CBDMS(Component-Based Development & Management System)의 개발을 용이하게 할 수 있다.
3차원 수치해석을 이용한 연약대 방향에 따른 터널 거동 특성 평가
임성빈 ( Sung Bin Yim ),정해근 ( Hae Geun Jeong ),서용석 ( Yong Seok Seo ) 대한지질공학회 2009 지질공학 Vol.19 No.1
터널 굴착 중 지반에 존재하는 연약대의 방향 특성에 따른 거동 및 응력 분포 특성을 3차원 수치해석을 이용하여 정량적으로 평가하였다. 수치모델에서 연약대의 방향은 RMR의 취약 불연속면에 대한 보정인자를 기준으로 설정되었으며, 위치는 각 방향 조건에 대하여 연약대가 천단부 상부 1D, 천단부, 막장 중앙부를 지나는 경우로 설정되었다. 지반정수는 현장 계측변위를 기반으로 하는 역해석을 통해 산정하였다. 최종적으로 터널 천단부에서 발생하는 변위의 크기를 기반으로 연약대 방향 및 위치 조건에 따른 영향도를 평가하여 5등급으로 분류하였다. A 3-D numerical analysis was carried out to observe potential effects of orientation of inherent weak zones to tunnel behaviors and stress distributions during tunnel excavation. Weak zones used for the analysis were placed at the upper 1D part from crown, on the crown and on the center of face, using orientations derived from the 6th RMR parameter for assessment of joint orientation effect on tunnel. Mechanical properties of rock mass were derived through a in-situ displacement measurement-based back analysis. Finally, a classification chart for crown settlement with five ranks based on orientation and location of weak zones is suggested.
3D 수치해석을 이용한 퇴적암 터널의 암반 등급별 전변위 산정
임성빈 ( Sung Bin Yim ),윤현석 ( Hyun Seok Yun ),서용석 ( Yong Seok Seo ),박시현 ( Si Hyun Park ) 대한지질공학회 2007 지질공학 Vol.17 No.2
터널이 굴착되면 응력이 재분배 되는 과정동안 변위가 발생한다. 터널의 변위는 굴착 전 선행변위, 굴착 후 미측정 변위, 계측변위로 구분할 수 있다. 일반적으로 굴착 전 선행변위와 굴착 후 미측정 변위의 현장 측정은 어렵기 때문에 터널 굴착에 따른 전변위의 크기와 변화 양상을 산정하기 위한 연구가 많이 수행되어왔다. 본 연구에서는 퇴적암을 기반으로 하는 터널의 지반등급별 전변위를 산정하고 이들의 특성을 파악하기 위하여 역해석 기법을 사용하였다. 계측변위와 3차원 수치해석에 의해 계산된 변위의 오차를 최소한으로 줄여 지반등급별 물성치를 추정하였으며, 굴착에 따른 전변위분포 양상을 산정하였다. 최종적으로 logistic 모형을 따르는 지반등급별 굴착에 따른 변위의 비선형 회귀식을 산정하였다. Tunnel displacement happens during the process of stress redistribution by tunnelling. Tunnel displacement can be divided into 3 types such as displacements occurring before excavation, non-measured displacements after excavation and measured displacements after excavation. Because measurements of displacements occurring before excavation and non-measured displacement after excavation are difficult and time-consuming in the field, many researchers have studied on total displacement and its characteristics with excavation using numerical analysis. In this study, we used a 3-D back analysis to estimate total displacement by rock mass grades in tunnel constructed in sedimentary rock. We reduced error between measured displacements and calculated displacements from a 3-D numerical analysis, and then estimated suitable rock mass properties by RMR classes. Ultimately, Logistic nonlinear regressions of total displacement with tunnelling were estimated by least square estimation.