http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임경범(Lim, Kyung-Bum),김하영(Kim, Ha-Young),유지오(Yoo, Ji-Oh),이동호(Rie, Dong-Ho) 한국화재소방학회 2008 한국화재소방학회 학술대회 논문집 Vol.2008 No.춘계
본 연구는 수분무 소화설비의 효용성에 대한 기초평가를 수행할 목적으로 FDS 수치시뮬레이션을 수행하였다. 화재강도 및 풍속의 변화에 따른 화재시 온도 및 연기농도에 대한 안전성 확보 효과를 분석하였다. 터널내 풍속이 없는 경우 수분무는 냉각효과에 의한 온도 및 연기농도 감소효과가 아주 우수하여 대피자의 안전성 확보에 효과적이었다. In this study, we conducted an FDS simulation for the purpose of carrying out a basic assessment of the usefulness of the water spray for fire extinguishing. We analyzed the effect of securing the stability in temperature and smoke density in case of fire according to fire intensities and changes in wind speed. When there was no wind speed in tunnels, it was effective in securing the safety of people because the cooling effect of the water spray system had an excellent effect on reducing temperatures and smoke densities there.
임경범(Kyung-Bum Lim),이동호(Dong-Ho Rie) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
전기적 원인에 의한 전기화재는 과부하, 누전, 합선 등의 원인에 의한 발화시 연소 확산을 미연에 방 지하기 위한 새로운 개념의 소방기술의 개발이 절실히 요구되고 있는 실정이다. 이에 본 연구에서는 전선화재 방지를 위해 화염과 접촉시 발포하여 단열층을 형성하는 열발포성 복합수지를 개발하여 화염으로부터 건축물내의 전선등으로 화재전이를 차단할 목적으로 한 방화시트 개발을 위한 발포성 특성을 분석하고자 한다.
고분자 복합재료의 표면 친수화 및 소수화 메커니즘 해석
임경범(Lim, Kyung-Bum),노태호(Roh, Tae-Ho),이재오(Lee, Jae-Oh) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.7
고분자 절연재료는 기존의 세라믹 절연재료에 대체되는 물질로 매년 수요가 꾸준히 급증하고 있다. 그러나, 실용에 있어 장시간 외부로부터 가해지는 열화인자에 노출됨에 따라 경시적 성능저하 및 수명단축이 발생되고, 이를 근본적으로 해결하기 위한 고분자 열화메커니즘의 규명이 안전성 향상 및 신뢰성 확보를 위해 중요한 과제로 대두되 고 있다. 본 연구는 이러한 열화발생 및 진행경로를 해석하기 위한 일환으로 열, 수분에 의한 열화를 각각 임의로 모 의하여, 열화 발생메커니즘을 해석하였다. 특히, 본 연구에서는 화학적 측면의 특성분석을 수행하였고, 이를 통해 표 면의 친수․소수적 분자구조 분석으로 최종적인 표면열화 모델링을 도출하였다. PCB 기판용 고분자 복합재료를 대상으 로 열, 수분 가속열화에 따른 표면에서의 접촉각, XPS 분석을 통해 표면의 변화 메커니즘을 분석하였다. 친수화 경향 을 나타내는 표면은 접촉각의 감소와 carboxyl(-COO*) 라디칼이 다량 발생하였으며, 소수화 경향을 나타내는 표면은 접촉각의 증가와 표면에서 산소기의 이탈과 탄소결합의 불포화 이중결합화로 안정된 화학구조를 구성하고 있었다. The polymer insulators have been extensively used as an alternate material of ceramic insulators. However, when they are used in practical conditions, there are many problems of decreasing performance and shortening lifetime due to the exposures of degradation factors applied from the outdoor situations. Accordingly, the analysis of polymer degradations has been getting influential too late as one of important subjects for improvements of safety and reliability. Heat, water treatments are arbitrary simulated for finding out the initiations and processes of surface degradation on the polymer surface. Especially, this study is focused on the chemical changes properties. From the analysis of hydrophilic and hydrophobic molecular structures, final modeling of surface degradation is accomplished. We checked the contact angle depending on heat and moisturized accelerated degradation and ran an XPS analysis to check the mechanism change of the surface of the PCB polymer composite. The surface that had a tendency to attract moisture showed a decrease in the contact angle and generated a large amount of carboxyl(-COO*) radicals. The hydrophobized surface showed an increase in the contact angle and had a stable chemical composition constituted of the breakaway of oxygen radicals and the formation of double bond by carburization.
건식법에 의해 제조된 내열성 폴리이미드박막의 열적특성 및 습도감지특성
林暻範(Kyung-Bum Lim),金冀煥(Ki-Hwan Kim),黃善楊(Sun-Yang Hwang),金鍾潤(Jong-Yoon Kim),黃明煥(Myung-Hwan Hwang) 대한전기학회 2007 전기학회논문지 Vol.56 No.6
The aim of this paper is to establish the optimum fabrication condition of specimens, using the Vapor Deposition Polymerization Method(VDPM), which is one of modesto prepare functional organic thin films using a dry process, and to develop a thin film type humidity sensor which has good humidity sensitive characteristics. The inner part of the film became denser and roughness of the film surface eased as curing temperature increased so that thickness of the film could be made uniform. This also shows the appropriate curing temperature was 250℃. The basic structure of the humidity sensor is a parallel capacitor which consists of three layers of Aluminum/Polyimide/Aluminum. The result of SEM and AFM measurement shows that the thickness of PI thin films decreased and the refraction increased as curing temperature increased, which indicates that a capacitance-type humidity sensor utilizing polyimide thin film is fabricated on a glass substrate. The characteristics of fabricated samples were measured under various conditions, and the samples had linear characteristics in the range of 20~80 %RH, independent of temperature change, and low hysteresis characteristic.
자외선 조사된 Poly(ethylene terephthalate) 필름의 표면 열화 분석
임경범(Kyung-Bum Lim),김종윤(Jong-Yoon Kim),최훈영(Hoon-Young Choi) 대한전기학회 2010 전기학회논문지 Vol.59 No.12
This paper deals with the change of surface potential decay, surface resistivity, contact angle and XPS of ultraviolet-treated PET films. From the experimental results on the surface potential decay of UV degraded-samples, it was found that the accumulation of charge is decreased and the surface potential decay time is shortened. Also, from the result of XPS, it was found that the changes affected by the surface degradation of PET film were caused by the generation of carboxyl groups through the chain decomposition and recombination with oxygen molecules in the air.
사용 환경조건에 따른 Epoxy / Glass Fiber 복합재료의 표면특성
임경범(Kyung-Bum Lim),이백수(Beak Su Lee),황명환(Myung Whan Hwang),김윤선(Yoon Sun Kim),유도현(Do Hyun You),이덕출(Duck-Chool Lee) 한국진공학회(ASCT) 2000 Applied Science and Convergence Technology Vol.9 No.3
본 연구는 옥외용 epoxy/glass fiber의 열화과정을 분석하기 위하여 FRP 적층판을 고온과 수분에 노출시켰다. 열화과정은 접촉각, 표면전위감쇠, 표면저항률의 비교에 의해 평가하였다. 젖음성의 변화는 열처리 시료에서 200℃까지 접촉각이 증가하였지만 수분처리 시료는 감소하였다. 표면전위감쇠 특정은 수분처리 시료에서는 감소하지만, 열처리 시료는 미처리와 비교해서 증가하였다. 또한, 표면저항률은 접촉각의 변화와 같은 경향을 보이고 있다. In order to analysis the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature and water. Then the degradation process was evaluated by comparing contact angle, surface potential decay, and surface resistivity. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of 200℃ increased. But that of water-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on water-treated specimens, but increase on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle.