http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
HTL:EML(DPVBi:NPB)층의 조성비 변화에 따른 청색 유기 발광 소자 개발
이태성,이병욱,홍진수,김창교,Lee, Tae-Sung,Lee, Byoung-Wook,Hong, Chin-Soo,Kim, Chang-Kyo 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.9
The structure of organic light-emitting diodes(OLEDs) with typical heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. 4,4bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl(NPB) used as a hole transport layer and 4'4-bis(2,2'-diphenyl vinyl)-1,1'-biphenyl(DPVBi) used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts carrier's transfer. Mixing of the hole transport layer and the emitting layer reduces abrupt interface between the hole transport layer and the electron transport layer. The operating voltage of OLED devices with graded mixed-layer structure is 2.8 V at 1 $cd/m^2$ which is significantly lower than that of OLED device with typical heterostructure. The luminance of OLED devices with graded mixed-layer structure is 21,000 $cd/m^2$ , which is much higher than that of OLED device with typical heterostructure. This indicates that the graded mixed-layer enhances the movement of carriers by reducing the discontinuity of highest occupied molecular orbital(HOMO) of the interface between hole transport layer and emitting layer.
이근우(Lee Keun Woo),이병욱(Lee Byung Wook),이태성(Lee Tae Sung),이종하(Lee Jong Ha),이재홍(Lee Jae Hong),김창교(Kim Chang Kyo) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.10
구리와 강철의 성질을 혼합한 것과 같은 우수한 성질을 갖고 있어서 열전도율이 좋고 내마모성이 뛰어난 베릴륨동 기판(BeCu foil)에 대한 식각 특성에 관하여 연구하였다. 일반적으로 베릴륨구리에 대한 식각용액은 염화제이철(FeCl₃)이 널리 알려져 있으며, 이 용액은 농도와 온도에 따라 식각시간이 달라지게 되어 식각되는 면의 상태가 영향을 받게 된다. 염화제이철의 농도를 변화시켜 본 결과 염화제이철의 농도가 증가할수록 식각률이 증가하였고, 염화제이철에 염산(HCl)을 첨가한 결과 식각률이 증가함을 알 수 있었다. 이는 염화제이철의 성분 중에서 염산(HCl)의 농도가 식각률에 영향을 미치고 있음을 나타낸다. 또한 영화재이철의 용도가 40℃ 일때 식각륜이 가장 우수하며 식각되는 면의 상태가 매우 양호해지고 식각되는 면의 각도도 수직에 가까워진다.
나노 임프린팅 기술에 의한 원기둥형 나노 패턴의 PMMA 도광판 형성 기술
이병욱(B. W. Lee),이태성(T. S. Lee),이종하(J. H. Lee),이근우(K. W. Lee),정재훈(J. H. Jung),홍진수(C. Hong),김창교(C. K. Kim) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.11
나노임프린팅 기술을 이용하여 원기둥형 나노 패턴을 갖는 도광판을 제작하였다. 나노 임프린트 공정을 이용하기 위해서는 니켈 스탬퍼가 필요하기 때문에 이를 제작하기 위하여 실리콘 웨이퍼 상에 건식식각을 이용하여 실리콘 몰드를 제작하였다. 제작된 실리콘 몰드를 전주도금을 이용하여 니켈 스탬퍼를 제작하였다. 제작된 니켈 스탬퍼를 사용한 나노임프린트 공정을 통해 원기둥 나노패턴을 갖는 도광판을 제작하였다.
삼지구엽초(Epimedium koreanum Nakai)의 추출성분
이태성(Tae-Seong Lee),조재현(Jae-Hyun Cho),황병호(Byung-Ho Hwang) 한국산림바이오에너지학회 2005 산림바이오에너지 Vol.24 No.2
삼지구엽초의 각 부분(잎, 줄기, 뿌리)을 MeOH로 추출한 후 농축하고 핵산, 클로로포름, 부탄올, 에틸아세테이트 및 수용성으로 분획하여 동결건조하였다. 각 추출물은 메탄올 수용액 및 에탄올-핵산 혼합액을 사용하여 Sephadex LH-20 칼럼크로마토그래피로 화합물을 분리한 후 TBA 및 6% 초산에 전개하는 셀룰로오스 박층 크로마토그래피로 단리물질을 확인하였다. 단리물질의 화학적 구조는 ¹H-NMR, <SUP>13</SUP>C-NMR 및 질량 분석으로 결정하였으며 단일화합물로 정제된 물질은 caffeic acid를 비롯하여 flavonoid와 그 배당체 화합물인 icariin, caffeic acid, hyperoside, Ikarisoside A, (+)-catechin이었다. 또한, 각 부분의 클로로포름 분획을 GC/MS (Libraries search)를 이용하여 정성분석을 실시하였다. The air dried of Epimedium koreanum Nakai was extracted with MeOH and its extractives were concentrated with a vacuum evaporator. The extractives were fractionated with a series of n-hexane, chloroform (CHCl₃), butanol (BuOH), ethyl acetate (EtOAc) and water on a separatory funnel. Each fraction was freeze dried to give some dark brown powder. The EtOAc and BuOH soluble fractions were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-n-hexane mixture as eluents. The isolated compounds were tested with a cellulose TLC developed with TBA and 6% acetic acid and then visualized on UV lamp or sprayed with vanillin-HCl-EtOH. The purified compounds were flavonoids and their glycosides, and organic acid as follows:(+)-catechin, icariin, hyperoside, Ikarisoside A and caffeic acid. The structures of each compounds were confirmed by ₁H-NMR, <SUP>13</SUP>C-NMR and Mass spectra. Also, executed qualitative analysis as use GC/MS(Libraries search) about CHCl₃ soluble compounds of each part.