http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
흑크롬 태양광 선택흡수막 제조용 도금액의 개발 및 전기화학적 고찰
이태규(Tai-Kyu Lee),조서현(Suh-Hyun Cho),최영희(Young-Hi Chea),오정무(P.Chung-Moo Auh) 한국태양에너지학회 1990 한국태양에너지학회 논문집 Vol.10 No.1
태양에너지 이용시스템 개발에 있어서 태양열을 효율적으로 이용하기 위한 태양광의 선택흡수막의 제조시 가장 중요한 것이 선택흡수막의 파장별 광학적 특성이다. 이러한 광학적 특성은 전기도금액의 조성에 따라 달라지고 전기도금 방법의 선택 및 도금조건에 따라 영향을 받게 된다. 본 연구에서는 미국에서 개발되고 가장 널리 사용되는 ChromOnyx 도금액을 근거로 새로이 Chromic acid-Propionic acid 흑크롬 도금액을 제조하였으며 액을 구성하고 있는 성분별 전기화학적 역할을 고찰하였다.<br/> 실제 전기도금법에 의해 제작된 흑크롬 선택 흡수막의 광학적특성에 관한 연구는 다시 상세히 다루어 발표할 예정이다. The electrochemical approach to the characteristics of black chrome solar selective coatings has been reviewed. Based on the formula of the ChromOnyx bath solution manufactured by Harshaw Company, the chromic acid-propionic acid bath solutions have been prepared by KIER. Comprehensive review of the black chrome electrodeposition mechanism also has been performed on the role played by constituents in the bath solution during electrodeposition. The optical properties such as absorption and emittance of electrodeposited black chrome coatings obtained from the new formula and their surface analysis will be reported in detail.
TiO₂ 태양광 전극을 이용한 태양 - 수소 제조시스템 기초연구
이태규(Tai Kyu Lee),조서현(Suh Hyun Cho),조덕기(Duk ki Jo),최영희(Young Hi Chea) 한국태양에너지학회 1991 한국태양에너지학회 논문집 Vol.11 No.2
본 실험에서는 태양광의 photon energy를 활용한 물분해 수소제조 연구를 위하여 일차적으로 TiO₂ 광전극의 제조와 함께 전기화학적 특성관찰의 기초실험을 수행하였다. TiO₂ anatase분말을 원형으로 molding 한 후 1250℃에서 sintering하여 n형 반도체 전극을 제조하였으며, titanium plate를 직접 funace내에서 800℃의 공기 및 산소 분위기 속에서 각각 산화막을 생성시켰다. 각 전극들의 XRD pattern을 관찰한 결과 rutile TiO₂ 성질의 표면구조를 지니고 있었으며, 표면상태를 광학 현미경으로 관찰하였다. 선택된 TiO₂ 전극의 전기적 특성을 조사하기 위하여 두 가지 농도의 NaOH electrolyser내에서, dark상태 그리고 Xenon lamp를 활용한 illuminated상태에 대하여 각각의 I-E 특성을 Potentiostat을 이용하여 관찰분석하였다. Electrochemical reaction utilizing the semiconducting photoanodes can be applied to the photoelectrolysis of water to produce hydrogen. In this preliminary experiment, TiO₂ photoanodes were prepared by sintering anatase-TiO₂ powder at 1,250℃ and thermal oxidizing titanium plate at 850℃ in air and oxygen, respectively. Their surface structures were observed by XRD and optical microscope. I-E characteristics of themally oxidized TiO₂ photoanode were also investigated under illuminated and dark conditions using 1 N and 0.1 N NaOH electrolyte solutions.
GC/MS를 이용한 폴리스타이렌 소재의 PCBs 정량분석 방법 개발
이재인(Jae in LEE),최기인(Gi In CHOI),최철호(Zel Ho CHOI),조훈식(Hun Sik CHO),최인석(In seok CHOI),이태규(Tai Kyu LEE) 한국생태공학회 2012 한국생태공학회지 Vol.3 No.1
A study on the determination method of PCBs(polychlorinated Biphenyls) content in polystyrene(PS) materials by GC/MS was performed. The toluene was selected for the extraction of PCBs in plastics and the best extraction time was 4 hours. The artifact materials produced from polystyrene with 2,2’,3,4,4’,5,5’-heptachlorobiphenyl standard solution were examined by homogeniety test. PCBs in average concentration of 118 mg/kg were quantitatively determined for the artifact materials by applying our procedure in interlaboratory comparison test.