http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정수슬러지 유래 흡착제와 첨착활성탄의 암모니아 및 포름알데히드 기체 흡착 성능 비교
이철호 ( Choul Ho Lee ),박나영 ( Nayoung Park ),김고운 ( Goun Kim ),전종기 ( Jong-ki Jeon ) 한국공업화학회 2016 공업화학 Vol.27 No.1
In this study, a pellet-type adsorbent was prepared by using the water-treatment sludge as a raw material, and its physical and chemical properties were analyzed through N2-adsorption, XRD, XRF, and NH3-TPD measurements. Adsorption performance for gaseous ammonia and formaldehyde was compared between the pellet-type adsorbents prepared from water-treatment sludge and the impregnated activated carbon. Although the surface area and pore volume of the pellet-type adsorbent produced from water- treatment sludge were much smaller than those of the impregnated activated carbon, the pellet-type adsorbent produced from water-treatment sludge could adsorb ammonia gas even more than that of using the impregnated activated carbon. The pellet-type adsorbent prepared from water-treatment sludge showed a superior adsorption capacity for ammonia which can be explained by chemical adsorption ascribed to the higher amount of acid sites on the pellet-type adsorbent prepared from water-treatment sludge. In the case of formaldehyde adsorption, the impregnated activated carbon was far superior to the adsorbent made from the water-treatment sludge, which can be attributed to the increased surface area of the impregnated activated carbon.
Semi-batch 반응기에서의 트리글리세라이드 접촉 수소화 반응
안재용,이철호,전종기,An, Jae-Yong,Lee, Choul-Ho,Jeon, Jong-Ki 한국청정기술학회 2019 청정기술 Vol.25 No.2
The aim of this study is to investigate the feasibility of an Ni-SA catalyst, which was prepared from nickel, kieselguhr, and alumina, for the hydrogenation of triglyceride in a bench-scale reactor. Ni-SA powders were prepared by precipitating nickel precursors on a silica and alumina support. The powder was reduced in a hydrogen flow, mixed with a saturated palm oil, and then cooled to prepare an Ni-SA catalyst tablet. The sizes of NiO crystals of a commercial Pricat catalyst and the Ni-SA catalyst prepared in this study were $35{\AA}$ and $38{\AA}$, respectively. The pore volume and pore size of the Ni-SA catalyst was much larger than the pore volume and pore size of the Pricat catalyst. In addition, the average particle size of the Ni-SA catalyst was much smaller than that of the Pricat catalyst. The triglyceride hydrogenation reaction was carried out in a semi-batch reactor using catalysts impregnated with oil and molded into tablets. It was found that the Ni-SA catalyst was superior to the commercial Pricat catalyst in triglyceride hydrogenation, which could be ascribed to the raw material and the products being less influenced by the diffusion resistance in the pores of the Ni-SA catalyst. The Ni-SA catalyst prepared in this study has the potential to replace the Pricat catalyst as a catalyst for use in the commercial process for hydrogenation of triglyceride. 본 연구의 목적은 트리글리세라이드 수소화 반응용 촉매로서 니켈, 실리카 및 알루미나로부터 제조한 Ni-SA 촉매의 적용 가능성을 semi-batch 반응기에서 검증하는 것이다. 실리카 및 알루미나 지지체 위에 공침법을 사용하여 니켈 전구체를 침전시켜서 Ni-SA 분말을 제조하였다. 이 분말을 수소분위기에서 환원시킨 후에, 유지경화유와 혼합한 후 냉각하여 Ni-SA 촉매 성형체를 제조하였다. 상업용 촉매인 Pricat 촉매와 본 연구에서 제조한 Ni-SA 촉매의 NiO 결정크기는 각각 $35{\AA}$와 $38{\AA}$으로 나타나서 두 촉매의 Ni의 분산도가 거의 유사함을 알 수 있었다. Ni-SA 촉매의 기공 부피와 기공 크기는 Pricat 촉매의 기공 부피와 기공 크기보다 훨씬 큰 것을 알 수 있다. 또한 Ni-SA 촉매의 평균 입자 크기는 Pricat 촉매에 비해 훨씬 작은 것으로 나타났다. 오일에 함침시켜서 태블릿 형태로 성형한 촉매를 사용하여 semi-batch 반응 장치에서 트리글리세라이드 수소화 반응을 수행한 결과, Ni-SA 촉매가 Pricat 촉매보다 반응 활성이 우수하다는 것을 알 수 있다. Ni-SA 촉매의 입자 크기가 Pricat 촉매의 입자 크기보다 훨씬 작고, Ni-SA 촉매의 기공 크기가 Pricat 촉매의 기공 크기보다 크기 때문에 반응 원료나 생성물의 확산 저항에 영향을 적게 받는다고 판단된다. 본 연구에서 제조한 Ni-SA 촉매는 트리글리세라이드 수소화 반응용 촉매로 상업적인 공정에서 사용 중인 Pricat 촉매를 대체할 수 있는 잠재력이 있음을 확인하였다.
결정성 Thiourea 에 의한 유기 이성체 및 유사비점 혼합물의 분리
김광주,이철호,이정민 ( Kwang Joo Kim,Choul Ho Lee,Jung Min Lee ) 한국공업화학회 1996 공업화학 Vol.7 No.1
여러 가지 탄화수소를 분리할 수 있는 활성화된 결정성 thiourea의 포접성능이 조사되었다. C_6부터 C_9 탄화수소의 단일성분, 이성분계에 대한 포접 평형 자료가 제시되었다. 단일성분에 대한 활성 thiourea의 포접능력은 탄화수소의 분자크기에 불규직적인 거동을 하였으며 온도에 무관함 알 수 있었다. 이성분계 분리에서 분자량이 낮은 탄화수소가 분자량이 높은 탄화수소보다 활성 thiourea에 선택성이 컸다. C_9방향족 이성체의 분리를 통하여 활성 thiourea는 메틸그룹의 위치 즉 분자의 형상(configuration)에 따라 영향을 미침을 알 수 있었다. C_9방향족 잔사유로부터 pseudocumene은 활성 thiourea에 의하여 99.5wt%순도로 분리가 가능하였다. 본 연구에서 조사된 이성분계에 대한 활성 thiourea의 분리능력은 증류, 추출결정화, 부가결정화보다 큼을 알 수 있었다. The entrapping capacity of the single hydrocarbons and the entrapping equilibrium data for binary mixtures of the C_6 to C_9 hydrocarbons on the activated thiourea have been investigated. The entrapping capacity of single component varied irregularly with molecular size and was independent of temperature. In the liquid phase entrapping from binary systems, the lower molecular weight hydrocarbon was entrapped preferentially. In the liquid phase entrapping from trimethylbenzene isomer and ethyltoluene isomer, selectivity was found to be related to the relative position of methyl groups in the molecules and hence the electronic configuration. Pseudocumene of a purity of 99.5wt% may be obtained from C_9 aromatic raffinate found in naphtha cracking center. Activated thiourea was more efficient than distillation, extractive crystallization and adductive crystallization in terms of separation factor.