http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이진현(J. H. Lee),이수철(C. S. Lee),김동옥(D. O. Kim),이근민(K. M. Rhee) 한국재활복지공학회 2009 한국재활복지공학회 학술대회논문집 Vol.2009 No.10
본 조사는 차량 보조도구로 휠체어를 사용하는 장애인이 차량을 이용할 때 휠체어 수납에 대한 불편함을 파악하여, 향후 관련 제품 개발에 개념설계를 하고자 실시하였다. 연구는 휠체어를 사용하고 있으며, 자가 운전을 할 수 있는 장애인 50명을 대상으로 설문조사 방식으로 실시하였다. 그 결과 설문에 참여한 88%의 장애인이 차량에 휠체어를 수납할 수 있는 보조장치의 개발이 필요하다고 응답하였으며, 차량 내부에 수납장치를 설치하여 휠체어를 적재하는 방법을 선호하였다.
뇌병변장애인의 일상생활을 위한 맞춤형 보조기구의 설계․제작․적용 사례 연구
이진현(J. H. Lee),최미나(M. N. Choi),임성빈(S. B. Yim),이근민(G. M. Rhee) 한국재활복지공학회 2010 재활복지공학회논문지 Vol.4 No.1
본 논문은 뇌병변장애인의 일상생활을 위한 맞춤형 보조기구 설계?제작?적용 사례연구로 대구광역시보조기구센터 장애인 보조기구 사례관리 시범사업의 2010년 일상생활영역의 맞춤 서비스 사례 중 2명을 대상으로 2010년 10월 18일부터 11월 17일까지 1개월간 진행되었다. 대상자 A는 47세 뇌병변장애인으로 양 하지의 근력과 기능이 많이 저하되어 바닥에서만 생활하며 스스로 변기에 올라 앉아 배변활동을 할 수 없었다. 이에 대상자 A에게 이동식 좌변기와 맞춤 경사로를 설계??제작하여 상지의 잔존근력으로 경사로를 올라가서 이동식 좌변기에 스스로 앉아 배변활동을 할 수 있도록 적용하였다. 대상자 B는 8세 뇌병변 장애인으로 손 기능이 저하되어 스스로 식사를 할 수 없었다. 기존에 나와 있는 여러 가지 식사보조도구들을 1차 적용하였으나 대상자에게 적합하지 않아 대상자의 관절가동범위(ROM)와 손 크기를 고려하여 맞춤으로 식사보조도구를 설계?제작하였고, 작업치료와 연계하여 지속적인 훈련을 통해 향후 스스로 식사를 할 수 있도록 적용하였다. 대상자 A와 대상자 B는 기존에 나와 있는 제품의 적용이나 개조가 접근할 수 없는 사례였음으로 대상자에게 맞춤형으로 설계?제작되어 적용되었다. 본 사례연구를 통해 맞춤형 보조도구의 설계?제작 서비스의 대한 중요성과 필요성을 인식할 수 있다. This paper is case study on design, manufacture and application of customized assistive device for the ADL of person with brain lesions. The study had carried out from October 2010 to November 2010 and 2 clients from Assistive device case management demonstration project which is performed by Daegu assistive and rehabilitation center had participated. Case A, a 47-year-old man with brain lesions, stays only on the floor and could not get close to the usual toilet by himself because of the poor low extremities muscle strength and function. The moveable-toilet and customized ramp had applied to Case A. He clambers up the ramp and reach to the toilet easily. Case B, a 8-year-old boy with brain lesions, had difficulties with self-feeding because of his clumsy hand. Several existing feeding aids were applied but not appropriated. A customized feeding aid was designed and manufactured out of regard of Case A/s ROM and right hand size. And his occupational therapist works together continuously to make him feed himself in the near future. Already-made assistive devices were not appropriate to Case A and B and to solve this problem, customized assistive devices were applied. The importance and needs of design and manufacture of assistive device were recognized through these case study.
폴리우레탄 폼 재질의 휠체어 좌석이 착석 압력에 미치는 영향
이진현(J. H. Lee) 한국재활복지공학회 2014 재활복지공학회논문지 Vol.8 No.3
본 연구는 휠체어 좌석의 재질 중 하나로 국내에서 주로 사용되는 폴리우레탄 폼의 경도에 따른 압력 분석을 통하여 압력 분산이 적절하게 이루어지는 재질을 제시하는 것에 목적이 있다. 이러한 연구의 목적을 달성하기 위해 폴리우레탄 폼의 경도 13㎏/㎠, 18㎏/㎠, 25㎏/㎠, 45㎏/㎠로 구성된 전방웨지 6cm 시트를 총 4개를 설계 및 제작하였다. 실험에는 비장애인 10명이 참여하였으며, 측정도구로는 XSENSOR를 사용하였고 휠체어 시뮬레이션에 시트를 올려 실험하였다. 각 시트마다 착석압력 측정은 5분간 실시하였으며 획득한 데이터 중 평균압력, 최대압력, 접촉면적 분석을 통해 경도에 따른 영향을 살펴보았다. 이에 본 실험을 통해 얻은 결과는 다음과 같다. 폴리우레탄 재질의 경도에 따라 평균압력, 최대압력 및 접촉면적은 경도 45㎏/㎠에서 높게 나타났고, 13, 18㎏/㎠에서 낮게 나타났다(p< .05). 이러한 결과를 통해 폴리우레탄 재질의 경도는 착석 시 압력변화에 영향이 있음을 알 수 있었으며, 향후 자세유지기구의 시트 재질로 폴리우레탄 폼을 사용한다면 경도 18㎏/㎠가 체압을 분산하기에 적절한 재질로 파악되었다. The purpose of this document is to provide basic data helpful in selecting seating device material by examining the affects of polyurethane foam material on seating pressure. In order to achieve this study objective, four seats, 6cm in height, were produced in hardness of: 13, 28, 25, and 45㎏/㎠. To measure the sitting pressure distribution (depending on the characteristics of the produced seats), 10 healthy subjects participated in the experiment. XSENSOR was used a measuring device, and each seat was mounted on a wheelchair simulation. By analyzing the obtained data with Average Pressure(AP), Peak Pressure(PP,), and Contact Area(CA), the sitting pressure was measured for five minutes on each seat. This experiment showed the following results: There were significant differences between the AP, PP, and CA in the seat material (p<0.5). While the hardness of 18㎏/㎠ showed low pressure, the hardness of 45㎏/㎠ showed high pressure. This study also showed that seat material made of polyurethane should be considered when selecting seats. If polyurethane foam is used in seat recommendations, it will be recommended to use 18㎏/㎠ for the proper hardness of the seat material.
이진현(J. H. Lee) 한국재활복지공학회 2014 재활복지공학회논문지 Vol.8 No.3
본 연구는 현재 운영되고 있는 광역 보조기구센터의 공적급여 연계 현황을 분석하고 발전 방향을 제시하는데 목적이 있다. 이를 위해 각 보조기구센터가 공적급여 사업에서 연계하고 있는 서비스 단계 및 주요 연계 부분들을 파악하였고, 지역사회에서 실시하고 있는 수리사업의 현황과 연계 현황 그리고 각 서비스에 필요한 공급 업체 연계에 대한 현황을 조사하였다. 이를 통해 나타난 결과는 공적급여는 보조기구 정보제공수준에서의 연계가 가장 많았다. 수리사업은 모든 센터들이 실시하지만 경·정비 수준의 수리를 일반적으로 수행하였고, 지역사회 전문 수리 업체와 연계하여 서비스를 제공하는 실정이었다. 공급 업체 연계는 지역별로 차이가 많이 나타났다. 이를 통해 전문센터에 보다 다양한 보조기구의 확충을 통한 공적급여 정보제공의 질적 향상과 지속적인 공적급여 지원 기관과의 긴밀한 교류가 필요하며, 연계의 효과성을 분석하여 정책 수립의 근거를 확보할 필요가 있다. The purpose of this study is to suggest improvement directions and analysis of assistive technology service linkage on public benefits in local assistive technology center. The service steps and the main program parts of public benefits linkage in local assistive technology center was identified, and the present status of associated repair works and contact suppliers of assistive technology device in local community was investigated. The result showed the most common level of associated status to provide information of assistive technology devices in public benefits. All the centers provided repair service, and it was typically performed to light maintenance. The centers offered with associated professional repair service supplier for high maintenance service. The connection with assistive technology device supplier appeared a lot of regional difference. Henceforth, the centers will be required to distribute more various assistive technology devices, it is necessary upgrading the quality of information and interaction with the public benefits supporting organizations through its expansion, and it is need to ensure based on policy through the analysis of the effectiveness about linkage.
지체장애인의 컴퓨터접근 향상을 위한 보조공학 평가 도구에 관한 연구
이진현(J. H. Lee),이근민(K. M. Rhee) 한국재활복지공학회 2008 한국재활복지공학회 학술대회논문집 Vol.2008 No.11
This research is about assessment tools of computer access that people with physical disabilities get to approach environment for using computer. There are 10 assessment tools that was compared various advantages to weaknesses of tool each other.