http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
HVPE 법을 통한 GaN 성장 시 기판 종류 및 V/III 비에 따른 잔류 stress 특성 연구
이주형,이승훈,이희애,강효상,오누리,이성철,이성국,박재화,Lee, Joo Hyung,Lee, Seung Hoon,Lee, Hee Ae,Kang, Hyo Sang,Oh, Nuri,Yi, Sung Chul,Lee, Seong Kuk,Park, Jae Hwa 한국결정성장학회 2020 한국결정성장학회지 Vol.30 No.2
본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다. The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.
이미지 데이터를 모니터링하는 관리도에서 이미지와 ROI 크기 조정의 영향
이주형,윤형욱,이성민,이재헌,Lee, JuHyoung,Yoon, Hyeonguk,Lee, Sungmin,Lee, Jaeheon 한국통계학회 2017 응용통계연구 Vol.30 No.3
A machine vision system (MVS) is a computer system that utilizes one or more image-capturing devices to provide image data for analysis and interpretation. Recently there have been a number of industrial- and medical-device applications where control charts have been proposed for use with image data. The use of image-based control charting is somewhat different from traditional control charting applications, and these differences can be attributed to several factors, such as the type of data monitored and how the control charts are applied. In this paper, we investigate the adjustment effect of image size and region of interest (ROI) size, when we use control charts to monitor grayscale image data in industry. 최근 산업의 생산공정에서는 머신비전시스템을 통하여 제품의 품질특성치에 대한 정보를 이미지 데이터로 제공하는 경우가 많다. 따라서 산업과 의학 현장에서 이미지 데이터의 모니터링을 위해 관리도 절차의 필요성이 많이 대두되고 있다. 이미지 데이터를 모니터링하는 관리도 절차는 전통적으로 사용하는 관리도 절차와 유사한 점도 있지만, 데이터의 구조를 비롯하여 각 이미지에서 ROI를 설정하여 관리도 절차를 적용하는 등 서로 다른 점도 많이 있다. 이 논문에서는 생산공정에서 제공되는 이미지 데이터에 대해 관리도를 사용하는 절차를 소개하고, 이미지 또는 ROI 크기의 확대와 축소가 제품의 이상원인을 탐지하는데 어떠한 영향이 주는지를 모의실험을 통하여 알아보았고 각 관리도의 성능 또한 비교하였다.
이주형,김원호,김용석,최성원,Lee, Juhyoung,kim, Wonho,Kim, Yongseok,Choi, Sungwon 한국항공운항학회 2016 한국항공운항학회지 Vol.24 No.1
Global aviation is projected to grow in demand by an annual average of 4.1% between 2014 and 2034. It can be said that environmental impact from aviation will therefore be expected to increase on a similar scale. As regards civil aviation emissions, the sector contributes between 2~3% to International aviation GHG emissions. In the European Union(EU), aviation emissions account for about 3% of the EU's total green house gas emissions, of which a majority are said to come from international flights. In terms of traffic volume in 2013, Korea's international aviation industry 11th with regard to passengers and 3rd with regard to cargo, attaining the overall rank of 5th in the world. GHG emissions has been increasing steadily over the last 4 years, averaging 3.9 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. As for aviation in Korea, there are a number of means intended to attain the Government's emission control objective in an efficient manner, such as AVA (Agreement of Voluntary Activity), TMS (Target Management System) and ETS (Emission Trading Scheme). In addition, the Government intends to better adapt to ICAO's Global MBM(Market-based Measures) that will come into performance on Year 2020. In the study, we focused on GHG mitigation measures that is fulfilling the AVA, TMS, ETS in the Government and suggest the effective measures to reduction the aviation GHG emissions.
Locator attachment를 이용한 하악 임플란트 유지형 피개의치의 임상적 평가
이주형,손동석,Lee, Ju-Hyoung,Sohn, Dong-Seok 대한치과보철학회 2011 대한치과보철학회지 Vol.49 No.4
연구 목적: 현대의학의 발달로 평균 수명이 증가하고 고령의 환자가 늘어남에 따라 무치악 환자의 비율도 증가하고 있다. 특히 심하게 흡수된 하악골에선 기존의 총의치로는 환자가 사용하기에 유지, 지지의 부족으로 사용상에 어려움이 있다. 하악에 2개의 임플란트 식립하여 피개의치를 제작하면 환자에게 좀 더 사용하기가 편한 의치를 제작해 줄 수 있다. 간단한 보철과정과 추후 수리가 쉽다는 이유로 현재 Locator가 보편적인 유지장치로 사용되고 있다. Locator를 이용한 하악 임플란트 유지 피개의치에서 임플란트와 보철물의 장기적인 성공률을 알아보았다. 연구 재료 및 방법: 대구가톨릭대학병원 치과 구강외과에서 2004년부터 2010년까지 총 10명의 환자(남 4명, 여 6명)의 하악에 2개의 임플란트(총 20개)를식립후Locator를 이용한 조직-유지 피개의치를 하였다. 본 연구는 최근 7년간 시술된 10명의 환자들을 대상으로 진료 기록부를 조사하고 방사선 사진을 계측하여 후향적 임상연구를 하였으며, 임플란트의 생존률 및 보철적인 합병증에 대해 알아보았다. 결과:임플란트는 100%의 누적 성공률을 보였고, 1년후(평균 58주) 방사선 사진에서 임플란트는 평균 1.03 mm ${\pm}$ 0.20 mm의 골소실을 보였으며, 임플란트의 기능에는 이상을 보이지 않았다. 피개의치는 의치파절, 의치상 이장 또는 개상, 메일의 탈락 또는 유지력 감소로 인한 메일 교체 등 다양한 합병증을 보였다. 그러나 의치상 이장 및 개상, 메일 인써트의 간단한 교체로 인해 장기적으로 임플란트 및 임플란트 유지 피개의치가 환자에게 유지되고 있었다. 결론: 하악 전방부위에 임플란트 2개를 식립 후 Locator를 이용한 임플란트 유지 하악 피개의치는 최소침습적인 수술, 간단한 보철 과정 및 수리 과정의 장점으로 인해 장기적으로 안정적인 치료법으로 사료된다. Purpose: This study compared the marginal bone loss around dental implant that were placed in the canine areas of the mandibles and finded the survival rate of implants, marginal bone loss around implants and prosthetic complications in 10 patients treated with overdentures retained with Locator attachments. Materials and methods: Ten patients who had received implant retained overdentures in the mandibules using two implants and Locator attachments at Daegu Catholic University Medical Center from 2004 to 2010 were included in this study. Evaluations of the survival rate of implants, marginal bone loss and prosthetic complications were performed. Results: Implants placed in this study showed a 100% survival rate and the average annual bone loss was 1.03 mm ${\pm}$ 0.20 mm in the first year. The patients have verbally indicated that they are comfortable and that their overdentures function well. But, implant retained overdentures had various prosthetic complications such as male change, relining, rebasing and denture fracture. Conclusion: Implant retained overdentures using two implant and Locator attachments in the fully edentulous mandibles is considered as a stable way for long terms because of minimal invasive operation, simple prosthetic process and easy repair.
이주형,Gyu-Heon Lee 대한치과기공학회 2022 대한치과기공학회지 Vol.44 No.4
The need for repairing removable dentures has grown as the population had aged. The di-rect methods allow existing dentures to be repaired without interrupting their use. However, if patient compliance is low, direct methods may be challenging. Moreover, attaching an ar-tificial tooth to a metal base is a complicated procedure because it necessitates casting a retentive element and soldering it to a metal base. This clinical report describes how to add an artificial tooth to a metal base, reline denture bases, and reestablish occlusion on re-lined removable dentures using indirect methods. Existing removable dentures were suc-cessfully repaired and their service life was efficiently extended using the methods de-scribed.
Grafting-onto법에 의한 poly(MMA-co-PEGMA) 전해질의 합성과 이온전도도에 대한 조성의 영향
이주형,류상욱,Lee, Ju-Hyung,Ryu, Sang-Woog 한국전기화학회 2013 한국전기화학회지 Vol.16 No.4
Copolymer consisted of MMA and tBMA was synthesized by radical polymerization and poly(MMA-co-MA) was prepared by selective hydrolysis of tert-butyl group. The obtained polymer was coupled with epoxy functionalized PEO of various molecular weight to synthesize poly(MMA-co-PEGMA) with different side chain length. The AC-impedance measurement shows $1.88{\times}10^{-6}Scm^{-1}$ of room temperature ionic conductivity from 48mol% of MMA while $5.11{\times}10^{-8}Scm^{-1}$ was observed in 82mol% sample. In addition, there was an effect of PEGMA molecular weight on ionic conductivity possibly due to the steric hindrance in grafting-onto coupling reaction. Finally, the polymer electrolytes shows electrochemical stability up to 6V at room temperature. 본 실험에서는 MMA와 tBMA의 공중합체를 합성하고, tert-butyl 그룹의 가수분해를 선택적으로 유도하여 poly(MMA-co-MA)를 제조하였다. 또한 말단에 에폭시기를 함유한 다양한 분자량의 PEO와 MA와의 grafting-onto 커플링 반응을 통해 같은 주사슬을 가지지만 부사슬의 길이가 다른 poly(MMA-co-PEGMA)를 합성하여 조성이 이온전도도에 미치는 영향을 평가하였다. AC-impedance로 측정한 상온 이온전도도는 MMA의 몰분율이 82%에서 $5.11{\times}10^{-8}Scm^{-1}$의 값이 얻어진 반면, 48%에서는 $1.88{\times}10^{-6}Scm^{-1}$로서 많은 PEGMA에서 높게 관찰되었다. 또한 에폭시기를 함유한 PEO의 분자량에 따라 이온전도도의 차이가 발생하는데, grafting-onto 법의 입체적 장애가 원인으로 고려되었다. 한편, 합성된 poly(MMA-co-PEGMA) 고분자 전해질은 상온에서 6V까지 우수한 전기화학적 안정성을 보여주었다.
극소수 샘플에서 유의발현 유전자 탐색에 사용되는 순열에 근거한 검정법
이주형,송혜향,Lee, Ju-Hyoung,Song, Hae-Hiang 한국통계학회 2009 응용통계연구 Vol.22 No.5
마이크로어레이 극소수 샘플(array) 자료의 분석에서는 유의한 발현수치를 나타내는 유전자를 검정통계량에 의해 결정하는 것이 주요과제이다. 이 때 수 천 또는 수 만개인 유전자의 발현수치로부터 귀무분포(null distribution)의 생성이 필수적이며, 극소수 샘플 자료의 경우에는 순열방법(permutation methods)에 의해 귀무분포를 생성하는 것이 가장 바람직하다. 본 논문에서는 귀무분포 생성에 사용될 수 있는 매우 단순한 검정통계량을 제시하면서 더불어 귀무분포 생성에 적절한 순열방법도 제안한다. 모의실험으로 기존의 검정통계량으로 생성된 귀무분포와 본 논문에서 제안하는 검정통계량의 귀무분포를 비교하며, 실제 자료에 적용하여 유의 유전자를 탐색한다. In the analysis of microarray data with a small number of arrays, the most important task is the detection of differentially expressed genes by a significance test. For this purpose, one needs to construct a null distribution based on a large number of genes and one of the best way for constructing the null distribution for a small number of arrays is by means of permutation methods. In this paper we propose simple test statistics and permutation methods that are appropriate in constructing the null distribution. In a simulation study, we compare the null distributions generated by the proposed test statistics and permutation methods with the previous ones. With an example microarray data, differentially expressed genes are determined by applying these methods.