http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양곡창고의 패시브 디자인 요소에 관한 연구 - 정읍시 양곡 창고를 중심으로
이주한(Lee, Ju-Han),권낙영(Kwon, Nak-young),원정연(Won, ChungYeon) 대한건축학회 2022 대한건축학회 학술발표대회 논문집 Vol.42 No.2
This paper aim to record the building elements and performance of passive design strategies used in Koreas under-documented traditional Grain Warehouses. First, 8-Grain Warehouses, all located in Jeongeup, Saemgol, were analyzed per primary size, exterior material, and structure. Then passive design elements such as wall ventilation openings, roof fans, and thermal mass strategies were identified. Finally, we measured the indoor and out temperature and humidity to examine the effectiveness of the passive design elements. The following were the results; the indoor temperature was consistently at 24~25.5 °C; however, the humidity were consistently 10% or higher than the outside. These results are essential findings in understanding the passive design strategies implemented in neglected vernacular architecture typologies.
1) Whole Spine 촬영시 농도보상을 위한 곡선 Filter 제작 및 응용
이주한,김선기,양규대,김성수,Lee Ju-Han,Kim Seon-Gi,Yang Gu-Dae,Kim Seong-Su 대한방사선사협회 1999 대한방사선사협회지 Vol.25 No.1
This study is to develop a curvi linear filter for density compensation when making whole spine X-ray Image. It was difficult for radiological technologists to make a domirable image for Whole-spine X-ray film due to the difference between cervical verteb
다수 임플란트 지지 보철물에서 지대주 나사의 풀림 토크값에 대한 연구
이주리,이동환,황재웅,최정한,Lee, Ju-Ri,Lee, Dong-Hwan,Hwang, Jae-Woong,Choi, Jung-Han 대한치과보철학회 2010 대한치과보철학회지 Vol.48 No.4
연구 목적: 본 연구는 다수의 임플란트에 의해 지지되는 보철물을, 두 가지 인상법에 의해 얻은 모형들에 연결한 후, 나사의 풀림 토크값을 측정하여 나사 결합부 안정성에 차이가 있는지를 알아보는데 그 목적이 있다. 연구 재료 및 방법: 네 개의 외부 육각 임플란트 (Br${\aa}$nemark $System^{(R)}$; Nobel Biocare AB)에 직접 연결되는 임플란트 상부 구조물과, 이와 수동적 적합을 갖는 완전 무치악 하악주모형을 만들었다. 이 주모형에서 비연결 인상법으로 6회 인상을 채득하여 6개의 모형 (1군)을 제작하고, 아크릴릭 레진을 이용한 연결 인상법으로 6회 인상을 채득하여 6개의 모형 (2군)을 제작하여, 총 12개의 실험모형을 제작하였다. 각 실험모형에 상부 구조물을 지대주 나사 ($TorqTite^{(R)}$ GoldAdapt Abutment Screw; Nobel Biocare AB)로 20 Ncm의 힘으로 조인 후 각 나사의 풀림 토크값을 총 2회 측정하였다. 두 군 간 나사의 풀림 토크값의 비교를 위한 통계분석은 반복측정을 고려하고 나사와 reading을 고정효과로, 모형을 랜덤효과로 포함하는 혼합모형 (mixed model)을 이용하여 유의수준 .05에서 실시하였다. 결과: 나사의 풀림 토크값의 평균은 7.9 Ncm (1군)과 8.1 Ncm (2군)이었으며, 4개 나사의 풀림 토크값 중 최소값인 최소 풀림 토크값의 평균은 6.1 Ncm (1군)과 6.5 Ncm (2군)이었다. 나사의 풀림 토크값은 두 군 간에 통계적으로 유의할 만한 차이가 없었고, 조인 순서와 위치가 서로 다른 4개의 나사 간의 풀림 토크값도 통계적으로 유의한 차이가 없었다. 최소 풀림 토크값도 두 군 간에 통계적으로 유의할 만한 차이가 없었다. 결론: 다수의 외부 육각 임플란트에 의해 지지되는 보철물에서, 나사의 풀림 토크값과 최소 풀림 토크값은 비연결 인상법과 연결 인상법에 의해 얻어진 모형 간에 차이가 없어, 나사 결합부 안정성에 차이가 없는 것으로 판단된다. Purpose: This study evaluated the detorque values of screws in a multiple implant-supported superstructure using stone casts made with 2 different impression techniques. Material and methods: A fully edentulous mandibular master model and a metal framework directly connected to four implants (Br${\aa}$nemark $System^{(R)}$; Nobel Biocare AB) with a passive fit to each other were fabricated. Six experimental stone casts (Group 1) were made with 6 non-splinted impressions on a master cast and another 6 experimental casts (Group 2) were made with 6 acrylic resin splinted impressions. The detorque values of screws ($TorqTite^{(R)}$ GoldAdapt Abutment Screw; Nobel Biocare AB) were measured twice after the metal framework was fastened onto each experimental stone cast with 20 Ncm torque. Detorque values were analyzed using the mixed model with the fixed effect of screw and reading and the random effect of model for the repeated measured data at a .05 level of ignificance. Results: The mean detorque values were 7.9 Ncm (Group 1) and 8.1 Ncm (Group 2), and the mean of minimum detorque values were 6.1 Ncm (Group 1) and 6.5 Ncm (Group 2). No statistically significant differences between 2 groups were found and no statistically significant differences among 4 screws were found for detorque values. No statistically significant differences between 2 groups were also found for minimum detorque values. Conclusion: In a multiple external hexagon implant-supported prosthesis, no significant differences between 2 groups were found for detorque values and for minimum detorque values. There seems to be no significant differences in screw joint stability between 2 stone cast groups made with 2 different impression techniques.
성층화된 유체 내에서 내부파와 표면파의 파형 변화 실험을 위한 수치적 연구
이주한(Ju-Han Lee),김관우(Kwan-Woo Kim),백광준(Kwang-Jun Paik),구원철(Won-Cheol Koo),김영규(Yeong-Gyu Kim) 한국해양공학회 2019 韓國海洋工學會誌 Vol.33 No.3
Internal waves occur at the interface between two layers caused by a seawater density difference. The internal waves generated by a body moving in a two-layer fluid are also related to the generation of surface waves because of their interaction. In these complex flow phenomena, the experimental measurements and experimental set-up for the wave patterns of the internal waves and surface waves are very difficult to perform in a laboratory. Therefore, studies have mainly been carried out using numerical analysis. However, model tests are needed to evaluate the accuracy of numerical models. In this study, the various experimental conditions were evaluated using CFD simulations before experiments to measure the wave patterns of the internal waves and surface waves in a stratified two-layer fluid. The numerical simulation conditions included variations in the densities of the fluids, depth of the two-layer fluid, and moving speed of the underwater body.
이주한,박일석,Lee, Ju Han,Park, Il Seok 대한두경부종양학회 2018 대한두경부 종양학회지 Vol.34 No.1
Tongue osteoma is a rare disease. Clinically, it occurs mainly in the posterior part of the tongue and may cause foreign body sensation, but most of it is found incidentally without any symptom. Clear mechanisms of development have not yet been established, but many hypotheses have been proposed. Treatment is possible with surgical resection and no recurrence or malignancy has been reported. We experienced a 29 year old man with osteoma of tongue. We report this case with a review of literature.
고분자 절연막과 계면을 이루는 도너-억셉터형 반도체성 고분자 박막의 전기적 특성
이주한 ( Ju-han Lee ),김도연 ( Doyeon Kim ),하종운 ( Jong-woon Ha ),윤민호 ( Minho Yoon ),이지열 ( Jiyoul Lee ),황도훈 ( Do-hoon Hwang ) 한국화상학회 2021 한국화상학회지 Vol.27 No.2
본 연구에서는 새로 설계한 고분자 절연체 위에 전자 주개(Donor)-받개(Acceptor) 기반의 반도체성 공중합체인 Cyclopentadithiophene-alt-benzothiadiazole (CDT-BTZ)를 활성 반도체층으로 형성하여 제작한 고분자 반도체 전계효과 트랜지스터의 전기적 특성을 살펴보았다. 이 연구에서 제시하는 고분자 절연체 박막은 내열성과 전기절연성이 우수한 포스파젠과 멜리민 구조가 가교된 형태를 가지기 때문에 0.006 nm의 매우 평탄한 RMS 표면 거칠기를 가졌으며, 4.5 MV/cm 이상의 매우 우수한 절연강도와 1.55의 다소 낮은 유전 상수를 가진 것으로 측정되었다. 그리고, 고분자 절연막과 계면을 이루는 CDT-BTZ D-A 타입 반도체성 공중합체 박막은 2.0 x 10<sup>-3</sup> ㎠/Vs의 선형영역 이동도와 1.0 x 10<sup>-3</sup> ㎠/Vs의 포화영역 이동도를 갖는 것으로 측정되었다. 이를 통해, 고분자 절연체 위에 형성된 CDT-BTZ 고분자 반도체 박막은 유연 전자회로의 스위칭 소자로 쓰이기에 충분한 잠재성이 있다고 여겨진다. In this study, the electrical properties of a polymer semiconductor field-effect transistor (PFET), where a Cyclopentadithiophene-alt-benzothiadiazole (CDT-BTZ) based electron donor-acceptor (D-A) type semiconducting copolymer layer on newly-designed polymer insulating films used as an active semiconductor layer, were investigated. The self-crosslinked polymer insulator thin-film had a very flat surface with an RMS roughness of 0.006 nm, a good dielectric strength of 4.5 MV/cm and a dielectric constant of 1.55. The CDT-BTZ based D-A type semiconducting copolymer film interfacing with the self-crosslinked polymer insulating layer was measured to have a linear region mobility of 2.0 x 10<sup>-3</sup> ㎠/Vs and a saturation region mobility of 1.0 x 10<sup>-3</sup> ㎠/Vs. Thus, the CDT-BTZ based D-A type semiconducting copolymer film formed on the new polymer insulating layer is believed to have sufficient potential to be used as a switching device for flexible electronic circuits.